1. Introduction
This manual provides instructions for the ATUOTIN 12V Smart Beverage Mug Holder, a versatile 2-in-1 device designed to keep your beverages at an ideal temperature, whether hot or cold. It is suitable for use in cars and offices, and can also function as a baby bottle warmer. Please read this manual thoroughly before use to ensure proper operation and safety.
2. Safety Information
- Ensure the device is connected to a 12V DC power source only.
- Pay attention when the device is in heating mode, as the cup and contents can become hot.
- Do not immerse the device in water or other liquids.
- Keep out of reach of children when in operation, especially during heating.
- Do not attempt to disassemble or repair the device yourself. Contact qualified personnel for service.
- Ensure proper ventilation around the device during operation.
- Use only the provided car power adapter.
3. Package Contents
Verify that all items are present in the package:
- 1 x Smart Cooling & Heating Car Cup
- 1 x Car Power Adapter
- 1 x User Manual
4. Specifications
| Attribute | Detail |
|---|---|
| Product Material | ABS, Aluminum Alloy |
| Product Color | Black, Rose Gold |
| Rated Voltage | 12V DC |
| Rated Power | 36W |
| Rated Current | 3A |
| Volume Capacity | 500ML-1L |
| Installation Location | Inside the car (cup holder) |
| Applicable Model | Universal |
For additional details and diagrams, you may refer to the User Manual (PDF).
5. Setup
- Placement: Place the Smart Beverage Mug Holder securely in a car cup holder or on a stable flat surface in your office. Ensure it is upright and stable to prevent spills.
- Power Connection: Connect the provided car power adapter to the DC 12V input port on the device.
- Vehicle Connection: Plug the other end of the car power adapter into your vehicle's 12V accessory socket (cigarette lighter port).
- Initial Check: Once connected, the temperature display should illuminate, indicating the device is powered on and ready for use.
6. Operating Instructions
The device features one-key operation for both heating and refrigeration.
- Power On: Once connected to power, the device is in standby mode, and the current temperature will be displayed.
- Heating Function: Press the power button once to activate heating mode. The display will show the target heating temperature (e.g., 58°C). The indicator light will typically turn red.
- Cooling Function: Press the power button again (or long-press, depending on model) to activate cooling mode. The display will show the target cooling temperature (e.g., 5°C). The indicator light will typically turn blue.
- Temperature Display: The integrated LCD screen provides real-time temperature readings of the cup's interior, allowing you to monitor your beverage's temperature.
Figure 4: Close-up of the digital temperature display. - Power Off: Press and hold the power button to turn off the device.
Applications:
- Keeping Drinks Cold: Ideal for soda cans, bottled water, or other beverages to keep them chilled during travel or at your desk.
Figure 5: Cooling a soda can. - Keeping Drinks Hot: Perfect for coffee, tea, or other hot beverages to maintain warmth.
Figure 6: Heating a mug. - Baby Bottle Warmer: Can be used to warm baby milk bottles to the appropriate temperature.
Figure 7: Warming a baby bottle.
7. Maintenance
- Cleaning: Disconnect the device from power before cleaning. Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or immerse the device in water.
- Storage: When not in use, store the device in a cool, dry place away from direct sunlight.
- Care: Avoid dropping the device or subjecting it to strong impacts.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | No power connection or faulty adapter. | Ensure the power adapter is securely plugged into both the device and the 12V power outlet. Check the vehicle's 12V outlet for power. |
| Heating/Cooling not effective. | Improper placement of beverage container or ambient temperature too extreme. | Ensure the beverage container is making good contact with the bottom of the mug holder. Allow sufficient time for temperature change. |
| Temperature display is inaccurate. | Sensor obstruction or malfunction. | Ensure the interior of the mug holder is clean and free of debris. If the issue persists, contact support. |
9. User Tips
- For optimal cooling, pre-chill your beverage before placing it in the holder.
- For optimal heating, use a mug or container that fits snugly into the holder to maximize contact with the heating/cooling plate.
- When using as a baby bottle warmer, always test the milk temperature before feeding to ensure it is safe for the baby.
- The device is designed for maintaining temperature, not for rapid heating or cooling of large volumes.
10. Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact the retailer where the product was purchased. Keep your proof of purchase for any warranty claims.