VENDY Peugeot 307 2004-2009

Contents

VENDY Front & Rear Wiper Blades Set for Peugeot 307 (2004-2009)

Model: Peugeot 307 2004-2009 | Brand: VENDY

1. Introduction

This manual provides essential information for the safe and effective installation, operation, and maintenance of your VENDY Front & Rear Wiper Blades Set for Peugeot 307 (2004-2009). Please read these instructions carefully before use.

2. Safety Information

  • Sharp Edges: Wear protective gloves when installing or replacing wiper blades to avoid injury.
  • Dry Operation: Do not operate wiper blades at high speed on dry glass surfaces. This can cause damage to the wiper blade and the windshield.
  • Handle with Care: Do not pull the wiper arm directly with your hands, as this may cause breakage.

3. Product Features

  • High Cleaning Efficiency: Effectively removes rainwater and dirt for clear visibility.
  • Anti-Aging Material: Made of premium natural rubber for enhanced durability and prolonged lifespan.
  • Stable Operation: Secure installation minimizes vibration, ensuring smooth and quiet wiping.
  • Tension Memory: Applies even pressure along the entire blade length for a consistent, streak-free wipe.
  • Aerodynamic Design: Significantly reduces drag, noise, and wind lift, especially during high-speed driving.
  • Intelligent Boneless Wiper: Designed to prevent ice and snow build-up on metal/plastic components.

4. Specifications

AttributeValue
Product NameUpgraded Intelligent Boneless Wiper
BrandVENDY
MaterialHigh grade natural rubber
Temperature Tolerance+158℉ to -40℉ (-40℃ to +70℃)
Lifespan1 Million Times of Wiping
Interface TypeSpecial Vehicle Interface
PlacementFront & Rear Windshield
Item Weight0.35 kg
Item Height1.8 cm
Item Width1.6 cm
Front Wiper Sizes28" (700mm) + 26" (650mm)
Rear Wiper Size14" (350mm)
CompatibilityPeugeot 307 (2004-2009), Left-hand drive vehicles only

Note: The wiper sizes are designed to match the original car specifications for direct replacement.

5. Package Contents

  • 1 set Front & Rear windshield wiper blades (3 pieces total)
Image of the VENDY Front & Rear Wiper Blades Set
Image: VENDY Front & Rear Wiper Blades Set, showing three blades.

6. Installation

Before installation, ensure the vehicle is turned off and the wiper arms are in the upright position.

6.1 General Installation Steps

  1. First, lift the wiper arm away from the windshield.
  2. Align the mounting clip of the new wiper blade with the wiper arm.
  3. Gently press the wiper blade into place until it clicks securely.
  4. Carefully lower the wiper arm back onto the windshield.

6.2 Visual Installation Guide

Video: Demonstration of front and rear wiper blade installation and performance.
Detailed step-by-step installation guide for front wiper blades
Image: Detailed step-by-step visual guide for installing the front wiper blades, showing how to remove the old blade and attach the new one.
Diagram showing various wiper blade adaptation interfaces
Image: Diagram illustrating different types of wiper blade adaptation interfaces (A1, B5, B2, B1, B7, B11, E, C, F, H) to ensure proper fit.

7. Usage and Maintenance

  • Replace wiper blades every 6-12 months, or immediately if you notice skipping, abnormal noise, or streaking during operation.

7.2 Cleaning Instructions

  • Wipe the rubber strip with a soft cloth dampened with neutral detergent.
  • Do not use gasoline or alcohol, or any corrosive cleaning agents, as these can damage the rubber.

7.3 Winter Operation

  • If ice forms on the windshield or wiper blades after use, remove the ice layer before operating the wipers.

7.4 Storage Conditions

  • Store in a cool, dry place, away from direct sunlight and high-temperature environments (above 70°C).
  • When not in use for extended periods, cover the wiper blades with a protective sleeve.

7.5 Important Precautions

  • Wiper blades are designed for glass surfaces only and are not suitable for non-glass surfaces.
  • When replacing, always select wiper blades that match the original equipment manufacturer (OEM) specification and model for your vehicle.

8. Troubleshooting

8.1 Wiper Skipping

  • Possible Causes: Rubber strip aging or an oily film on the glass.
  • Solution: Clean the windshield thoroughly with a glass cleaner and inspect the wiper blade for wear. Replace if necessary.

8.2 Excessive Noise

  • Possible Causes: Foreign objects lodged in the wiper blade or rubber strip deformation.
  • Solution: Inspect the wiper blade for any debris and remove it. Check the rubber strip for any signs of damage or deformation. Replace the blade if the rubber is damaged.

9. User Tips

No specific user tips are available at this time. Always refer to your vehicle's owner's manual for additional guidance on wiper system operation and maintenance.

10. Compliance

This product bears the CE marking, which is a mandatory requirement for products entering the European market. This marking indicates compliance with the essential requirements of relevant EU directives, such as safety, hygiene, and environmental protection.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.