Introduction
This manual provides instructions for the installation, operation, and maintenance of your ATUOTIN Front Bumper Fog Lights. These fog lights are designed as a direct replacement for specific BMW E30 models manufactured between 1985 and 1993. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Specifications
| Feature | Detail |
|---|---|
| OE Part Numbers | 63171385945, 63171385946 |
| Product Material | ABS Plastic |
| Product Dimensions | 190 x 160 x 100 mm (7.48 x 6.30 x 3.94 inches) |
| Product Weight | 439g |
| Origin | Mainland China |
| Item Type | Additional Brake Lights Assembly (Note: Product functions as Front Bumper Fog Lights) |
Applicable Models (BMW E30 Series, 1985-1993)
- 325e: 1985-1987 Base Coupe 2-Door, Base Sedan 4-Door
- 318i: 1985-1993 Base Sedan 4-Door, Base Coupe 2-Door, Base Convertible 2-Door
- 325es: 1986-1987 Base Coupe 2-Door
- 325: 1986-1988 Base Sedan 4-Door, Base Coupe 2-Door
- 325i: 1987-1993 Base Convertible 2-Door, Base Sedan 4-Door, Base Coupe 2-Door
- 325is: 1987-1993 Base Coupe 2-Door
- 325iX: 1988-1991 Base Coupe 2-Door, Base Sedan 4-Door
For detailed specifications and compatibility, you may refer to the official product document available as a PDF document.
Installation Guide
Installation of automotive lighting components can be complex. Professional installation is highly recommended. If you choose to install these fog lights yourself, please proceed with caution and consult your vehicle's service manual for specific instructions regarding bumper removal, wiring, and mounting points.
General Installation Steps:
- Safety First: Ensure the vehicle is turned off, the parking brake is engaged, and the battery is disconnected before beginning any electrical work.
- Access the Bumper Area: Depending on your BMW E30 model, you may need to remove or partially detach the front bumper to access the fog light mounting locations.
- Remove Old Fog Lights (if applicable): Carefully disconnect any wiring and unbolt the existing fog light assemblies.
- Mount New Fog Lights: Position the new ATUOTIN fog light assemblies into the designated slots on the bumper. Secure them using the appropriate bolts and fasteners. Refer to the image below for a close-up of the mounting bracket.
Figure 1: Close-up view of the fog light mounting bracket. - Wiring Connection: Connect the fog light wiring harness to the vehicle's electrical system. Ensure correct polarity and secure connections. If your vehicle did not originally come with fog lights, additional wiring and a switch may be required.
- Test Functionality: Reconnect the battery. Before reassembling the bumper, test the fog lights to ensure they illuminate correctly.
- Reassemble: Reattach the bumper and any other components removed during installation.
Product Overview:
Installed Appearance:
Operating Instructions
Once properly installed, your ATUOTIN Front Bumper Fog Lights operate in conjunction with your vehicle's existing fog light switch. Typically, fog lights are designed to be used in conditions of poor visibility, such as fog, heavy rain, or snow, to improve illumination of the road surface directly in front of the vehicle.
- Activation: Turn on your vehicle's headlights. Locate the fog light switch on your dashboard or steering column (consult your vehicle's owner's manual for exact location). Activate the switch to turn on the fog lights.
- Deactivation: Turn off the fog light switch when visibility improves or when not needed.
Always adhere to local traffic laws regarding the use of fog lights.
Maintenance
Regular maintenance helps ensure the longevity and optimal performance of your fog lights.
- Cleaning: Periodically clean the lenses of the fog lights with a soft cloth and mild automotive cleaning solution to remove dirt, grime, and road salt. Avoid abrasive cleaners that could scratch the lens.
- Inspection: Regularly check the fog lights for any signs of damage, such as cracks in the lens or housing. Inspect the wiring for fraying or loose connections.
- Bulb Replacement: If a bulb burns out (bulbs are not included with this product), replace it with a bulb of the correct type and wattage as specified by your vehicle's manufacturer or the fog light assembly. Ensure the vehicle is off and the battery is disconnected before attempting bulb replacement.
Troubleshooting
If your fog lights are not functioning correctly, consider the following common issues:
- Lights Not Turning On:
- Check the vehicle's fuse box for a blown fuse related to the fog lights. Replace if necessary.
- Verify that the fog light switch is functioning correctly.
- Inspect the wiring connections at the fog light assembly and the vehicle's harness for looseness or corrosion.
- Ensure that bulbs (if installed) are correctly seated and not burnt out.
- Dim or Flickering Lights:
- Check for loose or corroded wiring connections.
- Ensure the vehicle's charging system is operating correctly.
- Inspect the bulbs for signs of wear or damage.
- Moisture Inside Lens:
- Small amounts of condensation can occur due to temperature changes and usually dissipate.
- If significant moisture or water ingress is present, check the seal around the lens and housing for damage. Re-sealing or replacement may be necessary.
If these steps do not resolve the issue, it is recommended to consult a qualified automotive technician.
User Tips
- Always ensure the fog lights are securely mounted to prevent vibration and potential damage during driving.
- When replacing bulbs, use gloves to avoid touching the glass, as oils from your skin can reduce bulb lifespan.
- Consider applying a clear protective film to the fog light lenses after installation to guard against stone chips and road debris.
Warranty and Support
For any questions regarding product defects, warranty claims, or technical support, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
The manufacturer's official product document, which includes detailed specifications, is available as a PDF document.