1. Product Overview
The motorcycle ABS (Anti-lock Braking System) sensor is a core detection component of the motorcycle's anti-lock braking system. It is primarily installed on the front and rear wheel hubs of the motorcycle. Its function is to detect the rotational speed of the wheels in real-time, convert this mechanical speed signal into an electrical signal, and transmit it to the ABS control unit.
The ABS control unit uses this signal to monitor wheel speed. If a wheel is about to lock during braking, the control unit adjusts the brake pressure to prevent wheel lock, side slip, and loss of control, thereby enhancing braking safety, especially on wet and slippery roads. This sensor is specifically designed for motorcycles, featuring a compact structure, high environmental adaptability, and precise detection accuracy. It is compatible with most mainstream motorcycle models, including street bikes, locomotives, scooters, and off-road motorcycles.
2. Main Features
- High Detection Accuracy & Fast Response: Signal delay less than 2ms, ensuring real-time and accurate wheel speed data for timely braking adjustment by the ABS control unit.
- Strong Anti-interference Ability: Effectively resists electromagnetic interference from the motorcycle's electrical system and external environment, ensuring stable signal output in complex riding conditions.
- IP67 Waterproof and Dustproof: Adapts to harsh riding environments (rain, dust, mud, road debris), preventing water and dust ingress and potential damage.
- High Temperature & Vibration Resistance: Operates stably in high-temperature environments (up to 150°C) and under strong motorcycle vibrations, ensuring good structural stability.
- Compact & Lightweight Design: Easy to install and compatible with various motorcycle wheel hub structures. Manufactured with high-quality magnetic materials and precision processes for long service life.
- Direct Fit Design: Compatible with most original motorcycle interfaces, eliminating the need to modify vehicle structure and simplifying installation.
3. Specifications
| Attribute | Value |
|---|---|
| Item Name | ABS Speed Sensor |
| Type | Speed Sensor |
| Model Number (OE) | DT402404 |
| Brand Name | HM TECH |
| Applicable Models | Bajaj Dominar 400, Pulsar 200 Motorcycle |
| Item Weight | 0.1 kg |
| Origin | Mainland China |
| High-concerned chemical | None |
4. Installation Instructions
4.1 Installation Preparation
Before beginning installation, ensure the motorcycle's power supply is turned off and the ignition key is removed to prevent electrical shock or component damage.
Required Tools:
- 8-10mm socket wrench
- Screwdriver
- Non-magnetic feeler gauge
- Compressed air
- Lint-free cloth
- Brake cleaner
- Loctite 243 thread locker (if necessary)
Pre-installation Checks:
- Verify that the sensor model matches your motorcycle model (including front/rear wheel distinction).
- Inspect the sensor for any damage, deformation, wire breakage, or missing parts.
- Clean the installation area (wheel hub, sensor mounting bracket, and pulse ring) to remove dust, oil stains, metal shavings, and rust that could affect detection accuracy or fit.
- Check the pulse ring (toothed ring) for tooth damage, deformation, or rust. Replace if necessary.
4.2 Mounting Steps
- Locate Installation Position: Identify the designated installation position on the motorcycle (typically the front wheel hub near the brake disc or the rear wheel hub near the sprocket). Align the sensor's mounting hole with the motorcycle's fixing bracket hole, ensuring the sensor probe is aligned with the pulse ring (toothed ring) on the wheel hub.
- O-ring/Sealing Gasket Installation: If your sensor includes an O-ring or sealing gasket, install it on the sensor's mounting end. Apply a small amount of engine oil or grease to the O-ring to ensure a good seal and ease installation. Confirm the O-ring is undamaged and correctly positioned.
- Secure the Sensor: Screw the sensor into the mounting bracket by hand first. Then, use a socket wrench to tighten the fixing bolt to the specified torque (usually 6-8 N-m; refer to your motorcycle's torque specifications). Apply Loctite 243 thread locker to the bolt if needed to prevent loosening during riding. Avoid overtightening to prevent cracking the sensor body or damaging the mounting bracket.
- Adjust Sensor Gap: Use a non-magnetic feeler gauge to measure the gap between the sensor tip and the pulse ring (toothed ring). The ideal gap is between 0.3 mm and 1.0 mm (maximum 1.85 mm for some models). This gap should be narrow enough that a bank card cannot be inserted. If the gap is outside this range, use a thin shim to slightly adjust the sensor position or the mounting bracket to meet the requirement.
- Route Signal Wire: Route the sensor's signal wire along the motorcycle's frame and brake hose. Secure it with cable clips to prevent it from being squeezed, worn, or entangled with the wheel, brake disc, or other moving parts. Ensure there is enough slack in the wire to avoid pulling or breaking when the wheel turns.
- Connect Electrical Connector: Connect the sensor's electrical connector to the corresponding interface of the motorcycle's ABS control unit or wiring harness. Press the release tab until a distinct click is heard to ensure a firm connection. Avoid pulling the wires forcibly to prevent wire breakage or poor contact. Protect the connector from water and dust intrusion.
- Reinstall Removed Parts: Reinstall any parts removed during installation (e.g., wheel, brake disc, fender). Double-check the sensor's installation status and wire routing to confirm no omissions or errors.
5. Operation Method
5.1 Post-installation Test
- Turn on the motorcycle's power supply, insert the ignition key, and start the motorcycle.
- Observe the ABS indicator light on the instrument panel. It should turn on when power is supplied and turn off shortly after the motorcycle starts moving (typically when speed reaches 5 km/h or more). This indicates normal operation of the sensor and ABS system.
- Ride the motorcycle at a low speed (20-30 km/h) and gently apply the brake pedal to check if the ABS system activates (you may feel a slight vibration in the brake pedal). Observe if the wheel speed signal is stable via the instrument panel (if equipped).
- Run the motorcycle at various speeds and test brake performance under different conditions to confirm the sensor reliably transmits wheel speed signals.
- If any abnormality occurs (e.g., ABS indicator light remains on, no ABS activation, unstable signal), immediately stop the motorcycle, turn off power, and inspect the installation gap, wiring, pulse ring, and sensor integrity.
- Learning Process (if required): Pinch the brake switch, turn on the ignition switch, and repeat 8 times. Then, ride to 50 km/h and slow down to a stop until the ABS indicator light goes out.
5.2 Normal Operation
- Automatic Activation: After starting the motorcycle, the ABS sensor automatically activates and begins detecting the wheel speed signal, transmitting it to the ABS control unit in real-time.
- Braking Control: During riding, the ABS control unit continuously monitors wheel speed. In emergency braking or braking on wet/slippery roads, if a wheel is about to lock, the control unit rapidly adjusts brake pressure (up to 20 times per second) to maintain wheel slip rate between 10% and 30%. This ensures directional control while optimizing braking effectiveness.
- Indicator Light Interpretation: The ABS indicator light on the instrument panel shows the system's status. If it's off during riding, the system is normal. If it's on or blinking, it indicates a fault in the sensor or ABS system, and the ABS function may be invalid (conventional braking still works).
- Low Voltage Indication: A blinking ABS indicator light might signal low battery voltage. Turn off the ignition, charge the battery, and restart. If the fault persists, refer to the troubleshooting section.
- Post-Operation: After stopping the motorcycle, turn off the power supply. The ABS sensor will automatically cease operation, and the ABS control unit will record the last working data for future maintenance reference.
6. Maintenance
6.1 Daily Maintenance
- After each use, wipe the sensor's surface and probe with a lint-free cloth to remove dust, oil stains, and other impurities.
- Check the sensor's wiring and connector for looseness, oxidation, damage, or water intrusion. Tighten, clean, or dry as needed.
- Inspect the pulse ring for dirt or damage.
6.2 Regular Maintenance (Every 2000-3000 km or 3 months)
- Check the sensor's installation gap and adjust if it's outside the specified range (0.3 mm to 1.0 mm).
- Inspect the O-ring or sealing gasket for aging or damage and replace if necessary to ensure a proper seal.
- Use compressed air to clean the pulse ring slots to prevent debris accumulation.
- Check the signal wire for wear or breakage and replace if necessary.
6.3 Long-term Storage
- If the motorcycle will not be used for an extended period, disconnect the sensor's electrical connector.
- Clean the sensor and its installation position.
- Store the motorcycle in a dry, cool, and dust-free environment to prevent moisture, corrosion, or dust from affecting sensor performance.
- Store the sensor in multi-layer anti-static packaging to avoid electromagnetic interference.
6.4 Professional Inspection (Every 10000 km)
- Have professional technicians inspect the sensor's performance and internal circuit.
- Use an oscilloscope to detect the signal waveform (a continuous sine wave is normal).
- Replace the sensor if any potential fault is found.
- Utilize a wireless tester or cloud-based diagnosis platform for quick fault detection if available.
7. Troubleshooting
- ABS indicator light remains on after startup:
- Check for loose, disconnected, or short-circuited sensor wiring.
- Check if the sensor's probe is blocked by dust, oil stains, or metal shavings.
- Inspect the sensor for damage (measure resistance between pins: normal for two-wire sensors is 800-2300Ω; outside this range indicates damage).
- Check if the pulse ring (toothed ring) is worn, deformed, rusted, or has missing teeth.
- Verify the installation gap is within the specified range (0.3 mm to 1.0 mm).
- No ABS activation during braking:
- Check for broken or poorly connected sensor signal wire.
- Check if the ABS control unit is faulty.
- Verify brake system pressure is normal.
- Check if the sensor's probe is misaligned with the pulse ring.
- Unstable ABS operation (abnormal brake pedal vibration):
- Check if the sensor's installation gap is too large or too small.
- Check if the pulse ring is dirty or damaged.
- Check if the sensor's internal electronic circuit is faulty.
- Check for external interference with the wiring.
- Sensor fault code displayed (e.g., DTC 1-1, 1-2 for front wheel sensor abnormality):
- Use an OBD diagnostic tool to read the fault code and check the corresponding circuit and sensor.
- Check for improper installation or looseness of the sensor.
- Inspect the wiring harness for defects or poor contact in the connector.
- Erase the fault code after troubleshooting and test-ride the motorcycle to confirm the fault is eliminated.
- Sensor damage: If the sensor is damaged (no resistance, short circuit, or open circuit), replace it with a new sensor of the same model. Re-adjust the installation gap and wiring connection, then perform a post-installation test. If the pulse ring is also damaged, replace it simultaneously to prevent secondary damage to the new sensor.
8. Safety and Important Notes
- Do not install the sensor in locations prone to collision with external objects or excessive friction, as this can damage the sensor body, probe, or signal wire.
- During installation and operation, avoid touching, knocking, or scratching the sensor's detection probe with metal objects. This can damage the internal magnetic element and affect signal accuracy.
- Do not reverse the positive and negative poles of the sensor's power supply during wiring (if applicable), as this will burn the internal circuit and disrupt ABS system operation.
- Avoid using the sensor in environments with extremely high temperatures (above 150°C) or extremely low temperatures (below -40°C) for prolonged periods, as this can damage internal electronic components and shorten service life.
- Do not disassemble the sensor without authorization. If faulty or damaged, replace it with a matching model. Using incompatible sensors can damage the ABS control unit or cause system failure. Using original accessories is recommended to reduce recurrence of faults.
- During maintenance or replacement, ensure the motorcycle is parked stably, turn off the power, remove the ignition key, and support the motorcycle with a stand to prevent accidental movement and personal injury. Do not perform maintenance when the brake system is hot.
- When cleaning the motorcycle, avoid directly flushing the sensor and its connector with high-pressure water to prevent water from entering the internal circuit and causing short circuits.
- Do not modify the sensor's signal wire or mounting position without permission, as this can affect detection accuracy and lead to ABS system failure.
9. User Tips
No specific user tips are available at this time based on provided reviews or Q&A content.
10. Support and Contact Information
For further assistance, customization, or bulk orders, please contact our customer service team:
- Mobile: +86-13906874947
- E-mail: zhangyf@he-meng.com
A detailed user manual in PDF format is also available for download: View User Manual (PDF)