Trimui Trimui Smart Pro

Contents

Trimui Smart Pro Retro Handheld Game Console

Model: Trimui Smart Pro

User Instruction Manual

1. Introduction

The Trimui Smart Pro is a portable retro handheld game console designed for an immersive gaming experience. Featuring an open-source Linux system, a vibrant 4.96-inch IPS screen, and support for a wide array of classic game emulators, it brings your favorite retro titles to life. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your device.

2. What's in the Box

Please check the contents of your package:

  • Trimui Smart Pro Console (x1)
  • USB Type-C Charging Cable (x1)
  • User Manual (x1)
  • Gift Box (x1)
Contents of the Trimui Smart Pro package
Figure 2.1: Package Contents - Console, User Manual, Charging Cable, Gift Box.

3. Product Overview

Familiarize yourself with the various components and features of your Trimui Smart Pro console.

3.1 Console Layout

Detailed view of Trimui Smart Pro buttons and features
Figure 3.1: Console Details - Highlighting A/B/X/Y Keys, Mood LED, L/R Keys, Custom FN switch, and Built-in stereo speakers.
  • Display: 4.96-inch IPS HD screen (1280x720 resolution).
  • Controls: D-pad, Dual Analog Joysticks, A/B/X/Y buttons, L1/L2/R1/R2 shoulder buttons, Start, Select, Menu, Back, OK buttons.
  • Mood LED: RGB lighting around the joysticks.
  • Speakers: Built-in stereo speakers (1W x 2).
  • Custom FN Switch: A dedicated function switch for custom actions.
  • Ports: USB Type-C port, 3.5mm headphone jack, TF card slot.
Various angles of the Trimui Smart Pro console
Figure 3.2: Console Views - Top, bottom, side, front, and rear views of the device.

4. Setup

4.1 Charging the Console

Before first use, fully charge your Trimui Smart Pro console.

  1. Connect the provided USB Type-C charging cable to the console's Type-C port.
  2. Connect the other end of the cable to a compatible USB power adapter (5V/1.5A recommended).
  3. The middle LOGO LED will indicate charging status.
  4. A full charge provides approximately 6 hours of battery life.
Trimui Smart Pro battery life and charging details
Figure 4.1: Battery and Charging - 5000mAh Li-polymer battery, 5+ hours playtime, 5V/1.5A Type-C charging.

4.2 Powering On/Off

  • To Power On: Press and hold the Power button located on the top edge of the console until the screen illuminates.
  • To Power Off: Press and hold the Power button until a power-off menu appears on the screen, then select 'Power Off'. A short press of the Power button will put the device into sleep mode.

4.3 TF Card Installation

The console supports TF cards up to 1TB for expanded storage of games and system files.

  1. Locate the TF card slot on the bottom edge of the console.
  2. Gently insert the TF card into the slot until it clicks into place.
  3. To remove, push the TF card inwards until it springs out.

5. Operating Instructions

5.1 System Navigation

The Trimui Smart Pro runs on an open-source Linux system with a custom Trimui UI. Use the D-pad or left analog joystick to navigate through menus and game lists. The A button typically confirms selections, while the B button acts as a back or cancel function.

5.2 Game Selection and Play

  1. From the main menu, navigate to the desired emulator or game collection.
  2. Select a game from the list using the D-pad or joystick and press the A button to launch it.
  3. During gameplay, use the console's buttons and joysticks as per the original game's controls.

5.3 Supported Emulators

The Trimui Smart Pro supports a wide range of retro gaming platforms:

List of 26+ built-in emulators on Trimui Smart Pro
Figure 5.1: Supported Emulators - Including FC, GB, GBC, PS, SFC, GBA, MD, NGP, MS, PCE, NDS, WSC, MAME, NEO-GEO, PPSSPP, N64, ATARI, DC, and more.

ARCADE, DC, FBNEO, FC, GB, GBA, GBC, GG, MAME, MAME2003PLUS, MD, MS, N64, NDS, NEOGEO, NGP, OPENBOR, PCE, PGM, PS, PSP, SFC, SS, WS, DOS.

5.4 System Settings

Access the system settings menu to configure various options such as language, display brightness, audio volume, Wi-Fi, Bluetooth, and controller mappings. Refer to the on-screen UI for specific navigation within the settings.

5.5 Custom FN Switch

The Custom FN switch can be configured for specific functions within the system settings or certain emulators. Consult the system's documentation or community forums for advanced customization options.

6. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the console's exterior. For the screen, use a microfiber cloth specifically designed for electronics. Avoid using harsh chemicals or abrasive materials.
  • Storage: Store the console in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
  • Battery Care: To prolong battery life, avoid fully discharging the battery frequently. If storing for an extended period, charge the battery to about 50% and recharge every few months.

7. Troubleshooting

  • Console Not Turning On: Ensure the battery is charged. Connect the charger and try again. If still unresponsive, perform a hard reset (if available, check for a small reset pinhole or hold the power button for an extended period, e.g., 10-15 seconds).
  • Charging Issues: Verify the USB Type-C cable and power adapter are working correctly. Try a different cable or adapter. Ensure the charging port is free of debris.
  • Games Not Loading/Crashing: Ensure the game ROMs are compatible with the emulator and are not corrupted. Check if the TF card is properly inserted and formatted (FAT32 is supported for USB flash drives, typically also for TF cards).
  • No Sound: Check the volume settings in the system and within the game. Ensure headphones are properly connected if in use.
  • Screen Issues: If the screen is flickering or displaying artifacts, try restarting the console.

8. Specifications

FeatureSpecification
Model NameTrimui Smart Pro
Color OptionsBlack, White, Gray
CPUAllwinner A133P, Cortex-A53 Quad-core @ 1.8GHz
GPUImagination PowerVR GE8300 @ 660MHz
RAM1GB LPDDR4X
Operating SystemLinux
User InterfaceTrimui UI
Internal Storage8GB eMMC
Screen4.96-inch IPS, 1280x720 pixels, Fully Laminated
Wireless ConnectivityWLAN 802.11 b/g/n
BluetoothBT2.1 + EDR/4.2
TF Card SupportUp to 1TB (FAT32 format for USB port)
Audio OutputBuilt-in Stereo Speakers (1W x 2), 3.5mm Headphone Jack
Battery5000 mAh Li-polymer, 3.7V, up to 6 hours playtime
Charging InterfaceUSB Type-C (5V/1.5A input, USB data transfer limited to 500mA)
LED IndicatorsMiddle LOGO (charging), RGB Mood LED (joysticks)
Special FeaturesCustom FN Switch
Summary of Trimui Smart Pro specifications
Figure 8.1: Smart Pro Key Specifications Overview.

9. User Tips

  • Game Management: Organize your game ROMs into clearly labeled folders on your TF card for easier navigation within the console's UI.
  • Firmware Updates: Periodically check the official Trimui website or community forums for firmware updates to ensure optimal performance and access to new features.
  • Screen Protection: Consider applying a screen protector to prevent scratches on the IPS display.
  • Customization: Explore the open-source nature of the device; many communities offer custom firmware and themes to enhance your experience.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the seller's policies or contact the manufacturer directly. Keep your proof of purchase for warranty claims.

A detailed user manual in PDF format may be available for download from the seller or manufacturer's website: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.