1. Product Overview
The KINGSOFE 48000LM 300W CSP LED Car Headlights are designed to provide superior illumination for various vehicle models. Featuring advanced 3570 CSP chips, these bulbs offer significantly increased brightness, a precise beam pattern, and efficient heat dissipation for extended lifespan. They are engineered for universal compatibility and easy installation.
2. Safety Information
Please read all instructions carefully before installation and use. Failure to follow these instructions may result in improper operation, damage to the product, or vehicle, and may void your warranty.
2.1 FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Important: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.
3. Installation Guide
These LED headlights are designed for "Plug and Play" installation, making the upgrade process straightforward.
- Verify Bulb Size: Before purchasing and installing, ensure you check the correct bulb size for your vehicle's headlights.
- Access Headlight Assembly: Open your vehicle's hood and locate the headlight assembly. Depending on your vehicle model, you may need to remove some components to access the existing bulbs.
- Remove Old Bulb: Disconnect the wiring harness from the old bulb and carefully remove it from the headlight housing.
- Install New LED Bulb:
- Insert the new KINGSOFE LED bulb into the headlight housing. The design features a 1:1 buckle position for easy fitment.
- Ensure the LED chips are correctly oriented. For optimal beam pattern, the LED chips should face the 12 o'clock and 0 o'clock directions (directly upward and directly downward). The wire end of the bulb should face downward during installation.
- Connect Wiring: Connect the vehicle's wiring harness to the LED bulb. Note that the lamp has a polarity; if it does not light up, disconnect it, rotate it 180 degrees, and reconnect to reverse the positive and negative terminals.
- Test Functionality: Turn on your vehicle's headlights to ensure both low beam and high beam functions are working correctly.
- Secure Assembly: Reassemble any components removed during installation.
3.1 CANBUS Compatibility
These LED headlights come with a built-in CANBUS driver, designed to prevent error codes and flickering in approximately 99% of vehicles. However, for a few extremely sensitive vehicle systems, additional load resistors may be required to resolve any remaining error or flicker issues.
4. Operating Instructions
The KINGSOFE LED headlights are designed to enhance your driving visibility and safety.
- Functionality: These bulbs support both High Beam and Low Beam functions, depending on the specific bulb type (e.g., H4/9003/HB2 Hi/Lo).
- Enhanced Visibility: Experience up to 800% brighter illumination compared to standard halogen bulbs, providing a wider and farther light range.
- Optimal Beam Pattern: The advanced CSP chips ensure a focused beam pattern without dark spots or astigmatism, preventing glare for oncoming traffic while providing excellent road coverage.
- Usage Conditions: Ideal for various driving conditions including dark nights, rainy weather, foggy conditions, and snowy environments.
5. Maintenance
These LED headlights are designed for long-term, maintenance-free operation.
- Long Lifespan: With a lifespan exceeding 50,000 hours, these bulbs require no regular replacement.
- Efficient Cooling: The full aviation aluminum alloy body and 16,000 RPM ultra-speed cooling fan, combined with a sandwich copper substrate, ensure efficient heat dissipation, which is crucial for maintaining bulb longevity and performance.
- Cleaning: Periodically clean the headlight lenses of your vehicle to ensure maximum light output. Use a soft cloth and appropriate automotive cleaning solutions.
6. Troubleshooting
If you encounter any issues with your KINGSOFE LED headlights, refer to the following common problems and solutions:
- Bulb Not Lighting Up:
- Check the polarity: LED bulbs have a specific polarity. If the bulb does not light up after installation, disconnect it, rotate it 180 degrees, and reconnect to reverse the positive and negative terminals.
- Ensure secure connection: Verify that the wiring harness is securely connected to the bulb.
- Error Codes or Flickering on Dashboard:
- The built-in CANBUS driver is designed to prevent these issues in most vehicles.
- If errors or flickering persist, especially in highly sensitive vehicle systems, it may be necessary to install additional external load resistors (decoders). Consult a professional auto electrician if needed.
- Radio Interference:
- If you experience radio or television reception interference, try the following:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- If you experience radio or television reception interference, try the following:
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | KINGSOFE |
| Wattage | 300W/Pair |
| Rated Current | 1.5A-10A |
| Voltage | DC 9V-24V |
| Color Temperature | 6000K White (Range: 3000K-12000K) |
| Life Span | >50,000 hours |
| Waterproof Rating | IP68 |
| Operating Temperature | -45℃ ~ +150℃ |
| Chip Type | 3570 CSP Chips |
| Material | Aviation Aluminum |
| Fit Plug Types | H1, H4, H7, H8, H9, H11, 9005 (HB3), 9006 (HB4) |
| Certification | E-Mark, CE, FCC, RoHS |
| Car Model Compatibility | Universal |
| Origin | Mainland China |
7.1 Product Dimensions (Approximate)
| Bulb Type | Width | Length | Base Height/Width |
|---|---|---|---|
| 9005 (HB3) | 1.35 cm (0.531 in) | 7.10 cm (2.8 in) | 4.80 cm (1.89 in) height, 3.50 cm (1.38 in) width |
| H1 | 1.10 cm (0.433 in) | 7.54 cm (2.97 in) | 3.81 cm (1.5 in) height, 3.50 cm (1.38 in) width |
| H4 | 1.42 cm (0.559 in) | 7.65 cm (3.01 in) | 4.0 cm (1.57 in) width |
| 9006 (HB4) | 1.35 cm (0.531 in) | 7.10 cm (2.8 in) | 4.80 cm (1.89 in) height, 3.50 cm (1.38 in) width |
| H11 | 1.40 cm (0.551 in) | 7.20 cm (2.83 in) | 4.80 cm (1.89 in) height, 3.50 cm (1.38 in) width |
| H7 | 1.35 cm (0.531 in) | 7.3 cm (2.87 in) | 3.90 cm (1.54 in) height, 3.50 cm (1.38 in) width |
8. User Tips
- Always double-check your vehicle's original bulb type before ordering to ensure compatibility.
- When installing, pay close attention to the bulb's orientation to achieve the optimal beam pattern and avoid blinding other drivers.
- If you experience any dashboard warnings or flickering after installation, and the built-in CANBUS doesn't resolve it, consider purchasing additional external load resistors.
- For vehicles with complex electrical systems or if you are unsure about the installation process, it is recommended to seek assistance from a qualified automotive technician.
9. Warranty and Support
For detailed product information, including a user manual in PDF format, please refer to the official documentation.
An external user manual (PDF) is available for further reference: View User Manual (PDF).
For any further assistance or inquiries, please contact the seller or refer to the product's official support channels.