Introduction
This document serves as a general standard instruction manual for the HQCAM Mini IP Camera Module. Please note that some functions described herein may not be supported on the specific camera model you have purchased. Always refer to the product description for the most accurate feature set of your device.
Safety Information
⚠️️ Disclaimer: Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.
1. Product Overview
1.1 Package Contents
The package typically includes the Mini IP Camera Module. Please note that the power adapter is NOT included and must be purchased separately.
1.2 Hardware Overview
The camera module features a compact 32x32mm design. Key connections include:
- RJ45 Port: For network connectivity.
- 12V Power Input: For power supply.
- Audio MIC: For audio input.
- IR-CUT: For day/night vision switching.
2. Setup
2.1 Power Supply
The IP Camera module requires a DC12V power supply. A power adapter is not included with the camera. Ensure you use a compatible 12V 1A power adapter.
2.2 App Download & Registration (TUYA Smart App)
To use the camera, download and register for the TUYA Smart App:
- Download App: Search for "TUYA Smart" in your mobile app store or scan the QR Code below to download it.
- User Registration:
- Open the TUYA Smart App and click "Register".
- The system will automatically detect your current country. You can also manually choose your country.
- Enter your mobile number or email address.
- Agree to the Privacy Policy.
- Enter the verification code sent to your mobile/email.
- Set your password to complete registration.
- Log in with your newly created account.
2.3 Adding the Device to the App
Before connecting, ensure your mobile device is connected to a 2.4GHz Wi-Fi network. The camera module requires a standard power adapter to function correctly.
Open the TUYA Smart App, go to "My Home", and click the "+" button in the upper right corner to add a device. You will be presented with three network configuration options:
2.3.1 Bluetooth Network Configuration
- Enable Bluetooth on your phone.
- In the "Add Device" interface, the app will search for nearby devices.
- Once your device is found, select it and click "Add".
- Enter your current Wi-Fi password and click "Next".
- The device will connect to the network. A "Add successful" message will appear upon completion.
2.3.2 AP Hotspot Configuration
- In the "Add Device" interface, select "Smart Camera".
- Choose "AP Hotspot" and click "Next".
- Go to your phone's Wi-Fi settings and connect to the device's hotspot (usually named "SmartLife-XXX" or "SL-XXX").
- Return to the app, enter your Wi-Fi password, and click "Next".
- The device will connect. A "Add successful" message will appear.
2.3.3 Network Cable Direct Connection
- In the "Add Device" interface, select "Camera/Lock" and then "Smart Camera 2.4GHz&5GHz".
- In the reset device interface, select "Switch to Cable Connecting", then click "Next" twice.
- Ensure your phone and the device are connected to the same local network for searching.
- The device will connect. A "Added Successfully" message will appear.
3. Operation (IPC Batch Tool)
The IPC Batch Tool is a utility for managing and configuring multiple camera modules. The default account is admin and the password is 123456. The IP is Adaptive.
You can download the operation file for the IPC Batch Tool from: http://www.hqcam.cn/en/
3.1 Basic Setup
Open the search tool and click the Settings button. Configure the following:
- Auto search: Automatically searches for devices on the LAN.
- Reconnect interval: Sets the interval for reconnecting disconnected devices.
- Living Stream: Switches to sub-stream preview if the main video is stuck or not smooth.
- Sync System Time: Automatically updates and synchronizes device time with the computer.
- Automatic Check Upgrade: Prompts for new version updates.
3.2 Image and PTZ Test
- Image Test: Double-click the device to preview the video.
- PTZ Test: Right-click the video preview to open the PTZ control and test pan/tilt/zoom functions.
3.3 Firmware Upgrade
- Select the device(s) to upgrade.
- Click "Scan" in the firmware upgrade bar to select the upgrade file.
- Click "Upgrade".
- Optionally, select "Automatically reset device after successful upgrade". If selected, the device will reset and unbind from the APP, requiring re-addition.
3.4 Configuration File Management
- Configuration File Import: Select device(s), click "Scan" to choose the configuration file, then "Import".
- Custom File: Similar to configuration file import, but for custom settings.
- Export Settings: Exports current device parameters for later use.
- Import Settings: Imports previously exported parameters.
3.5 Parameter Settings
Select a device and click "Other Parameters" to adjust the following:
- IP Address Modification: Set fixed IP or use DHCP.
- Full Netcom: Enables private protocol.
- Audio Settings: Adjust input/output volume, enable/disable audio.
- Video Settings: Select main/sub stream resolution and encoding format (default H.265).
- OSD Settings: Configure on-screen display for time, date, channel name, etc.
- Image Settings: Adjust image flip/mirror and video standard.
- Lamp Settings: Configure lamp board type (Dual light/white light/Infrared light) and Day/Night Switch (Photoresistor/SceneBrightness).
- System Settings: Modify language, timezone, and device model.
- GB28181 Settings: Configure parameters for GB28181 protocol.
- User Management: Change device password.
- Sync Time: Synchronize device time with the computer.
- Reboot: Restart the device.
- Recovery Options:
- Simple Recovery: Resets user and network management (excluding full netcom and IP adaptive). App add status is not cleared.
- Full Recovery: Restores all device parameters to factory settings. If added to the APP, it will be unbound and need to be re-added.
3.6 Label Print Settings
In the IPC Batch tool, open "Print Setting" to configure and print labels for your devices. You can set label size, QR code size, product model, custom content, font size, and print rules.
3.7 Access via IE Explorer
Right-click a device in the IPC Batch Tool, select "Open Device Browser", and enter Internet Explorer to access the device's web interface for further configuration.
4. Maintenance
- Regular Reboots: If the device experiences issues, a simple reboot can often resolve them.
- Firmware Updates: Keep the device's firmware updated to ensure optimal performance and access to new features.
- Network Stability: Ensure a stable 2.4GHz Wi-Fi connection and keep the device near the router for best signal strength.
5. Troubleshooting
5.1 Connection Problems
- Q: Device can't connect to the server?
- A: Check network connection, DNS configuration for the router, and if the router has any whitelist enabled.
- Q: Device shows disconnected?
- A: Ensure the device is powered on and the network connection is stable. Try rebooting the device. If the problem persists, reset the device and reconfigure the network. Try moving the device closer to the router.
- Q: Device can't connect to Wi-Fi?
- A: The device only supports 802.11b/g/n at 2.4G Wi-Fi, not 5G Wi-Fi. Ensure the Wi-Fi signal is within range. If your router uses 5G, enable dual-frequency mode and select the 2.4G signal. For network configuration, turn on location permissions in your mobile device (iOS/Android).
5.2 Operation Problems
- Q: Camera image is upside down?
- A: Set the "flip screen" option in the APP.
- Q: Warning messages are sent too frequently?
- A: Adjust the "Alarm setting" in the APP as required.
- Q: Noise during preview?
- A: Keep your mobile device away from the camera.
- Q: PTZ (Pan/Tilt/Zoom) is not working?
- A: Try rebooting the APP or the camera module.
- Q: No sound when checking video?
- A: First, check if the microphone is enabled for the camera. Then, check if the speaker is on in the APP and if your mobile device's sound is not muted.
- Q: Cannot hear voice from the camera on mobile?
- A: Check management permissions for microphone/speaker in the APP settings on your mobile phone. For iOS, enable microphone permission in privacy settings. For Android, find permission management settings (e.g., application management, mobile phone manager) to enable microphone and speaker permissions.
- Q: Talkback function behavior?
- A: If the APP shows "hold the button then talk", it's one-way communication (like WeChat). If it shows "Intercom", it's two-way communication (like a call).
5.3 Account Questions
- Q: App prompts account already registered?
- A: You likely already have an account with that mobile number/email. Please log in directly.
- Q: Cannot log in to the APP?
- A: Ensure your mobile network connection is stable. Try using mobile data or switching Wi-Fi networks. If login still fails, it might be a DNS analysis problem. Try rebooting your mobile or changing the network connection.
- Q: Forgot APP password?
- A: Click "forget password" and follow the steps to set a new password using a verification code.
6. Specifications
General Specifications
| Attribute | Value |
|---|---|
| Brand Name | HQCAM / gulinsan |
| Model Number | GS-32PBC4MALP4 |
| Style | Mini Camera |
| Installation | Embedded |
| Connectivity | RJ45 |
| Sensor | CMOS |
| Sensor Brand | SmartSens |
| Lens (mm) | 3.6mm |
| Viewing Angle | 90° |
| Minimum Illumination(Lux) | 0.01lux |
| Video Compression Format | H.264 |
| Power Supply(V) | DC12V |
| Power Consumption(W) | 12v 1a |
| Operating Temperature | -10°C - 60°C |
| AI Functions | Motion Detection |
| Color Night Vision | Yes |
| Special Features | Vandal-proof |
| Supported Operating Systems | Windows 98, XP, Vista, 7, 8, 10, 2000, 2003, 2008 |
| Dimensions (L x W x D)(mm) | 32x32mm (without lens) |
| Weight | 10g |
Resolution Specifics
| Resolution | Megapixels | Sensor Size | Main Stream (FPS) | Sub Stream (FPS) |
|---|---|---|---|---|
| 1080P | 2MP | 1/3" | 1920*1080, 1-20 | 704*576, 800*448, 640*480, 640*360, 352*288, 1-20 |
| 2304*1290 | 3MP | 1/3" | 2304*1290, 1-15 | 704*576, 800*448, 640*480, 640*360, 352*288, 1-20 |
| 2560*1440 | 4MP | 1/2.8" | 2560*1440, 1-30 | 704*576, 640*480, 640*360, 352*288, 1-30 |
| 3840*2160 | 8MP | 1/3" | 3840*2160, 1-20 | 704*576, 800*448, 640*480, 640*360, 352*288, 1-20 |
7. User Tips
- For optimal Wi-Fi performance, always ensure your camera module is within a reasonable range of your 2.4GHz Wi-Fi router.
- If experiencing connectivity issues, a quick reboot of both the camera and your router can often resolve the problem.
- Regularly check for firmware updates using the IPC Batch Tool to benefit from improved features and stability.
- When setting up, ensure all necessary app permissions (like location and microphone) are granted for full functionality.
8. Warranty & Support
For further assistance or technical support, please contact the technician via email: 358562036@qq.com.
Additional item guides and documents may be available. Please refer to the official product page or the provided PDF for more details.