1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your new LED Car Door Interior Courtesy Ghost Shadow Welcome Lights. These lights are designed to project a clear logo onto the ground when the car door is opened, enhancing both aesthetics and visibility. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Safety Information
- Always turn off the vehicle's power supply before attempting any installation or maintenance to prevent electrical shock or damage.
- Ensure all connections are secure and properly insulated to avoid short circuits.
- If you are unsure about any step of the installation process, consult a qualified automotive technician.
- Do not modify the product in any way, as this may void the warranty and create safety hazards.
- Keep the product away from water and extreme temperatures during storage and handling.
3. Package Contents
Your package should contain the following items:
- 2 x LED Welcome Lights
4. Specifications
Image: Product Specification Diagram showing features like HD Projector, Plug&Play, and Longer Lifespan.
| Feature | Detail |
|---|---|
| Voltage | 12V |
| Power Consumption | 5W |
| Material | ABS + Aluminum Alloy |
| LED Type | LED Chip |
| Color | White |
| Life Span | More than 80,000 hours |
| Work Environment Temperature | -40°C ~ 105°C |
| Item Diameter | 8 cm |
| Item Weight | 80g |
Image: Product dimensions showing approximate measurements of 80mm (length), 37mm (width), and 27mm (height).
Image: Internal components diagram highlighting the intelligent circuit board, adjustable logo projection direction, original car decoding chip, and plug-and-play design.
5. Compatibility
These LED welcome lights are compatible with the following Subaru models:
- For Subaru Forester: 2013-2024
- For Subaru Outback: 2012-2024
- For Subaru Legacy: 2010-2021
- For Subaru XV: 2011-2017
- For Subaru Impreza: 2010-2021
- For Subaru Tribeca: 2011
Image: Overview of the LED welcome lights installed in a car door, with a list of compatible Subaru models and years.
6. Installation
The installation process is designed to be plug-and-play, requiring no drilling or wiring modifications. Follow these steps carefully:
Video: Visual guide demonstrating the installation process of the LED welcome lights.
- **Turn off Vehicle Power**: Ensure your vehicle's power supply is completely off before starting.
- **Locate Installation Position**: Identify the existing light unit at the inner bottom part of your car door.
- **Remove Old Light**: Use a suitable tool (e.g., a pry tool) to carefully pry open and remove the original door light shell.
- **Disconnect Wiring**: Separate the original door light from its electrical connector.
- **Connect New Light**: Connect the wiring of the new LED welcome light to the vehicle's door light power cord. Ensure the positive and negative poles are correctly matched.
- **Insert New Light**: Insert the new LED welcome light into the housing.
- **Secure Light**: Gently press the new light into the door panel until it clicks securely into place.
- **Test Functionality**: Open the car door to verify that the light turns on normally and the projected logo pattern is clear and properly positioned.
Image: Step-by-step diagram illustrating the installation process: 1. Pry open original light, 2. Separate connector, 3. Insert new light interface, 4. Press light into door.
For additional visual guidance, please refer to the installation video provided above.
7. Operating Instructions
The LED Car Door Interior Courtesy Ghost Shadow Welcome Lights operate automatically. Once installed, the lights will activate and project the logo onto the ground whenever the corresponding car door is opened. They will turn off when the door is closed.
8. Maintenance
- **Cleaning**: Use a soft, dry cloth to gently wipe the surface of the lights to remove dust or dirt. Avoid using abrasive cleaners or solvents.
- **Inspection**: Periodically check the lights for any signs of damage or loose connections.
- **Environmental Conditions**: While designed for a wide temperature range, prolonged exposure to extreme conditions may affect performance.
9. Troubleshooting
If you encounter any issues with your LED welcome lights, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Incorrect wiring, loose connection, no power, or faulty unit. | Check wiring for correct polarity (positive/negative). Ensure connections are secure. Verify vehicle power is on. If problem persists, the unit may be faulty. |
| Projected logo is dim or unclear. | Lens is dirty, or light is not fully seated. | Clean the lens with a soft cloth. Ensure the light is fully and correctly inserted into the door panel. |
| Light flickers. | Unstable power connection. | Check all electrical connections for tightness and proper contact. |
If any abnormalities occur that cannot be resolved with the above steps, promptly troubleshoot issues with the circuit or installation position. If necessary, consult a professional.
10. User Tips
- Before final installation, temporarily connect the light to ensure it functions correctly and the logo projects as desired.
- When prying open the original light, use a plastic pry tool to avoid scratching your car's interior.
- Ensure the light is firmly seated to prevent it from falling out during driving.
11. Additional Resources
A detailed user manual in PDF format is available for download. This document may contain further information and diagrams not covered in this brief guide.
You can access the PDF manual here: User Manual (PDF)
12. Warranty and Support
For warranty information or technical support, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.