Introduction
The DJI Mic Mini 2 is a compact and versatile wireless microphone system designed for high-quality audio recording in various scenarios, including live streaming, content creation, outdoor sports, and vlogging. It features a lightweight design, magnetic attachment, advanced noise reduction, and multi-device compatibility.

Package Contents
Ensure all the following items are included in your package:

- DJI Mic Mini 2 Transmitter(s) and Receiver(s) (depending on chosen variant)
- Charging Case (for universal version or mobile phone version)
- Magnetic Front Cover (x2)
- Mic3 Magnet (x1)
- Windproof Wool Sleeve (x1)
- USB-C Charging Cable (x1)
- User Manual (PDF available online)
Note: Multi-color magnetic front covers are only included in the universal version of the 2-in-1 set as standard. Other sets need to be purchased separately.
Setup Guide
1. Charging the Device
Before first use, fully charge the transmitters, receiver, and charging case.
- Place transmitters and receiver into the charging case.
- Connect the charging case to a power source using the USB-C charging cable.
- The charging case can fully charge both devices approximately 3.6 times.

2. Wearing the Transmitter
The transmitter is designed for comfortable and secure attachment.
- Weighing only 11g, it is comfortable to wear.
- Use the magnetic clip for easy attachment to clothing. The clip is detachable and rotatable, allowing you to adjust the angle for optimal sound pickup.
- Ensure the microphone is aligned precisely with the sound source.

3. Connecting the Receiver
The DJI Mic Mini 2 offers multi-device compatibility and mixed connection options.
- Universal Version Receiver: Easily pairs with cameras, computers, and tablets. It supports connecting two transmitters simultaneously.
- Mobile Phone Version Receiver: Plug-and-play compatibility with Android phones and iPhone 15 series and above (requires USB-C port). Supports two transmitters simultaneously.
- DJI OsmoAudio Direct Eco-Connection: For some DJI devices, you can connect the transmitter directly without a receiver to obtain 48KHz 24-bit studio-grade audio.

For mixed connections with different generations of DJI Mic products (Mic Mini, Mic Mini 2, Mic 3), refer to the specific light indicators:
- Green light mode: Supports mixed connection of DJI Mic Mini and DJI Mic Mini 2 transmitters.
- Blue light mode: Supports mixing and matching any 2 transmitters among DJI Mic Mini, DJI Mic Mini 2, and DJI Mic 3.

Operating Instructions
1. Audio Quality and Noise Reduction
The DJI Mic Mini 2 delivers 48KHz/24-bit high-quality audio. It features advanced noise reduction capabilities:
- 2-level Noise Reduction: Switch between strong and weak noise reduction freely.
- Weak Noise Cancellation: Suitable for quiet environments, significantly reduces fan, air conditioner, and reverb noise while minimizing voice loss.
- Strong Noise Reduction: Suitable for relatively noisy environments, significantly reduces ambient noise, captures clear vocals, and maintains sound transparency.
- Auto-Limiting: Automatically reduces volume when it's too high to prevent clipping, ideal for scenarios where re-recording is difficult.
- Low-Cut Function: When enabled in the DJI Mimo app, it reduces sounds below 100Hz for cleaner audio.


2. Gain Adjustment and Tone Presets
- 5-level Gain Adjustment: Adjust the gain via the receiver dial for quick and easy operation, enhancing audio clarity.
- 3 Tone Presets: With the DJI Mimo app, you can quickly switch between three tones (Regular, Full, Bright) to personalize your voice and match the recording atmosphere.


3. Secure Audio Track
When the safety track is enabled in the DJI Mimo app, DJI Mic Mini 2 can record in dual tracks: the main track at normal volume, and a second track at -6dB. This prevents issues like plosives and clipping in recorded materials, providing extra protection for your audio.

4. DJI Mimo App Integration
Connect your DJI Mic Mini 2 to the DJI Mimo app via Bluetooth for smarter performance and advanced controls.
- Set more parameter content.
- Upgrade product firmware.
- Adjust noise cancellation levels.
- Enable/disable low-cut function.
- Control auto power off after timeout.
- Sync with camera power on/off.
- Enable/disable auto anti-explosion sound.
- Switch between Mono/Stereo recording.

Maintenance
1. Charging and Battery Care
- Always use the provided USB-C cable for charging.
- For optimal battery life, avoid fully discharging the devices frequently.
- Store the devices in the charging case when not in use to keep them charged and protected.
- The system features smart energy saving:
- Auto Power Saving: When no receiver signal is detected by the transmitter, it enters sleep mode. Upon re-detection, it auto-wakes and reconnects.
- Auto Power Off: If the receiver and transmitter remain disconnected for over 15 minutes, they will automatically power off.
- Sync with Camera Power: When connected to a camera via a 3.5mm TRS cable, the microphone can synchronize power on/off with the camera.
- Charge While Using: The receiver can be powered by your phone when connected, and can also charge a mobile phone simultaneously when connected to an external power source.

2. Cleaning and Accessories
- The windproof wool sleeve helps reduce wind noise. Clean it gently as needed.
- Magnetic front covers can be swapped for personalization or replacement.

Troubleshooting
- No Sound/Low Volume:
- Check receiver and transmitter power.
- Ensure proper connection to your recording device.
- Adjust the 5-level gain on the receiver.
- Verify microphone placement and ensure it's not obstructed.
- Distorted Audio/Clipping:
- Lower the gain setting on the receiver.
- Enable the "Auto-Limiting" feature in the DJI Mimo app.
- Ensure the "Secure Audio Track" is enabled for a -6dB backup recording.
- Excessive Background Noise:
- Activate noise reduction features (weak or strong) via the DJI Mimo app.
- Use the windproof wool sleeve in windy conditions.
- Enable the "Low-Cut Function" in the DJI Mimo app to reduce low-frequency rumble.
- Connection Issues:
- Ensure devices are within the effective transmission range (up to 400m, 300m for mobile version).
- Check battery levels of both transmitter and receiver.
- Restart both the transmitter and receiver.
- For app connection, ensure Bluetooth is enabled on your mobile device and the DJI Mimo app is updated.
- Firmware Update Failure:
- Ensure stable internet connection during updates via the DJI Mimo app.
- Make sure devices are sufficiently charged before starting an update.
Specifications
| Feature | DJI Mic Mini 2 (Universal Version) |
|---|---|
| Weight (Transmitter) | Approx. 11g |
| Audio Quality | 48KHz/24-bit |
| Communication | Wireless |
| Set Type | Multi-Microphone Kits (2 Transmitters + 1 Receiver, Mixed Connection Transmission) |
| Transducer | Antenna Amp |
| Use | Pro Studio |
| Style | Lavalier Microphone |
| Origin | Mainland China |
| Built-in Battery | Yes |
| Color Matching | 8-color Magnetic Front Cover |
| Wearing Way | Rotatable Clip Magnetic |
| Charging Case Accessories | Transmitter, Receiver, Half-sleeve Audio Line, Magnet, Back Clamp Magnet |
| Sound Styles | 3 Tone Presets |
| Battery Life (Transmitter) | ~11.5 Hours |
| Battery Life (Receiver) | ~10.5 Hours |
| Battery Life (Charging Case) | 48 Hours (total system life with case charges) |
*DJIMicMini2 data are from DJI Laboratories and are measurements obtained under specific test conditions. For the use settings and precautions of some functions, please refer to the official website product page.
**Other product data are sourced from public websites as of April 21, 2026.

User Tips
- For outdoor recording, always use the windproof wool sleeve to minimize wind noise, even if noise reduction is enabled.
- Experiment with the 3 tone presets in the DJI Mimo app to find the best sound profile for your voice and recording environment.
- When recording important audio, always enable the "Secure Audio Track" feature to have a -6dB backup, which can save your recording from unexpected clipping.
- Take advantage of the "Charge While Using" feature when recording long sessions, especially with mobile phones, to ensure uninterrupted power.
- Keep your DJI Mic Mini 2 firmware updated via the DJI Mimo app to benefit from the latest features and performance improvements.
- The magnetic clip is very convenient, but for very active movements, consider using an additional securement method if available, to prevent accidental detachment.
Warranty and Support
For detailed warranty information, technical support, and comprehensive instructions, please refer to the official user manual provided in the packaging box or download the PDF version from the official DJI website. A digital version of the user manual is available here.
For further assistance, please contact DJI customer support through their official channels.