VENDY Opel Corsa E Hatchback 2015-2018

Contents

VENDY Wiper Blades User Manual

Front & Rear Wiper Blades Set for Opel Corsa E Hatchback (2015-2018)

1. Important Safety Information

  • Sharp Edges: Wear protective gloves when installing or replacing wiper blades to avoid injury.
  • Dry Operation: Do not operate wiper blades on dry glass surfaces at high speed, as this can cause damage to the wiper blades and windshield.
  • Handling: Do not pull the wiper arm directly with your hands to prevent breakage.

2. Product Overview

This VENDY Wiper Blades Set is designed for the front and rear windshields of the Opel Corsa E Hatchback, model years 2015-2018. It provides clear visibility and durable performance in various weather conditions.

Key Features:

  • High Cleaning Efficiency: Effectively removes rainwater and dirt for optimal visibility.
  • Anti-Aging Material: Made of premium rubber for enhanced durability and resistance to environmental factors.
  • Stable Operation: Secure installation minimizes vibration and ensures smooth wiping.
  • Double Carbon Steel Bar: Applies even pressure along the entire blade length, ensuring high-precision curvature and durable adhesion to the glass.
  • Aerodynamic Design: Significantly reduces drag, noise, and wind lift during high-speed driving.
  • Intelligent Boneless Wiper: Designed to prevent ice and snow build-up on metal/plastic components.
  • Silent Operation: Engineered for quiet performance, minimizing abnormal noise.
  • Compatibility: Suitable for 99% of left-hand drive vehicles.
Wiper blade components diagram
Diagram showing the components of the wiper blade: Special Vehicle Interface, Streamlined Wind Resistance Guide, Memory Elastic Steel Sheet, and Natural Silicone Strip.

3. Installation Guide

Ensure the vehicle is turned off and the wiper arms are in the 'service' position before beginning installation.

Front Wiper Installation:

  1. Lift the wiper arm away from the windshield.
  2. Remove the old wiper blade by detaching it from the mounting clip.
  3. Align the new VENDY wiper blade's mounting clip with the wiper arm hook.
  4. Gently press the new blade into place until it clicks securely.
  5. Carefully lower the wiper arm back onto the windshield.
Video demonstrating the installation process for the front wiper blades.

Rear Wiper Installation:

  1. Lift the rear wiper arm.
  2. Remove the existing rear wiper blade.
  3. Attach the new VENDY rear wiper blade, ensuring it is firmly secured.
  4. Gently lower the wiper arm back to its resting position.
Rear wiper blade installation steps
Visual guide for installing the rear wiper blade, showing the steps to remove the old blade and attach the new one.

Adaptation Interface:

The wiper blades are designed to match standard original car wiper interfaces. Refer to the diagram below to identify the correct interface type for your vehicle.

Wiper blade adaptation interfaces
Image displaying various wiper blade adaptation interfaces (A1, B1, B2, B5, B7, B11, C, E, F, H) to ensure a correct fit.

4. Usage and Maintenance

It is recommended to replace your wiper blades every 6-12 months, or immediately if you notice signs of wear such as skipping, abnormal noise, or streaking.

Cleaning Method:

Wipe the rubber strip with a soft cloth dampened with neutral detergent. Do not use gasoline or alcohol, as these can damage the rubber.

Ice Removal:

If ice forms on the wiper blades after use, gently remove the ice layer before operating the wipers to prevent damage.

Precautions:

  • Do not wipe the rubber strip with corrosive cleaning agents.
  • Wiper blades are not suitable for non-glass surfaces.
  • When replacing, always select the original equipment manufacturer (OEM) specification and model to ensure proper fit and performance.

5. Storage Conditions

Store the wiper blades in a cool, dry place, away from direct sunlight and high-temperature environments (above 70°C / 158°F). When not in use for extended periods, cover them with a protective sleeve.

6. Troubleshooting

Wiper Skipping:

This issue may be caused by the aging of the rubber strip or an oily film on the glass. Consider cleaning the windshield thoroughly or replacing the blades if the rubber is worn.

Excessive Noise:

Check for foreign objects lodged in the wiper mechanism or inspect the rubber strip for any deformation. Remove any obstructions or replace the blades if the rubber is damaged.

7. Specifications

AttributeValue
Product NameUpgraded Intelligent Boneless Wiper
BrandVENDY
PlacementFRONT & REAR
MaterialHigh-Quality Natural Rubber
ColorBlack
Item Weight0.35 kg
Item Height1.8 cm
Item Width1.6 cm
Temperature Tolerance+158°F to -40°F (-40°C to +70°C)
Lifespan1 Million Times of Wiping
OriginMainland China
Product parameters table and wiper sizes
Detailed product parameters including temperature tolerance, lifespan, and a table of available wiper sizes in inches and millimeters.

8. User Tips

No specific user tips are available at this time. For optimal performance, ensure your windshield is clean from debris and oily films before operating wipers.

9. Additional Resources

A detailed user manual in PDF format is available for download. This document provides further information on product usage, safety, and maintenance.

PDF Manual: View User Manual (PDF)

© 2024 VENDY. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.