1. Product Overview
The Fccemc Cuttable Trunk LED Light Strip is designed to provide flexible and bright illumination for your car's trunk and interior. It features a soft, bendable design, easy installation via a cigarette lighter plug, and can be trimmed to fit various spaces. Available in 2M and 4M lengths with White or Warm White light options, it enhances visibility and ambiance.
Video: Demonstrating the flexibility and different light colors (Warm White and White) of the LED strip.
2. Package Contents
- Fccemc Cuttable Trunk LED Light Strip (2M or 4M, White or Warm White)
- Cigarette Lighter Connector with Switch
- Installation Tools (Pry tool, clips - may vary by package)
Image: The LED light strip coiled, showing the cigarette lighter plug and included installation accessories.
3. Setup and Installation
Follow these steps to install your LED light strip:
-
Connect to Power Supply: Connect the light strip to the cigarette lighter connector. Then, plug the cigarette lighter connector into your car's 12V power outlet. Test the light strip to ensure it emits light normally before proceeding with full installation.
Image: Detailed installation steps, including connecting to the cigarette lighter and inserting the light strip.
- Prepare for Installation: Identify the desired location for the light strip, typically along the rubber strip of the trunk door. Distinguish between the front and back sides of the light strip for proper orientation.
-
Install the Light Strip: Open the rubber strip at the trunk door and carefully insert the LED light strip into it. Guide the light strip along the adhesive strip next to the door. Ensure it is fully inserted and securely in place.
Image: Visual comparison of a car trunk before and after the LED strip installation, highlighting the enhanced lighting.
Note: A small section at the end of the light strip may not illuminate. This is normal due to the design where the lamp tube length needs to be greater than the light bead length, and glue is applied at the end for protective measures.
4. Operating Instructions
The LED light strip is operated via the switch located on the cigarette lighter connector.
- To turn on the light strip, press the switch on the cigarette lighter connector.
- To turn off the light strip, press the switch again.
Ensure the cigarette lighter connector is securely plugged into the car's 12V power outlet for operation.
5. Maintenance
- Cleaning: Use a soft, dry cloth to gently wipe the light strip. Avoid using harsh chemicals or abrasive materials that could damage the strip.
-
Trimming: The light strip can be trimmed to a custom length if needed. Always turn off and unplug the power before cutting. After cutting, remove the insulation rubber sleeve at the end of the cut section and reinstall it to ensure protection.
Image: Instructions for trimming the LED strip, emphasizing to turn off power and re-insulate the end.
- Storage: If removing the light strip for storage, coil it loosely and store it in a cool, dry place away from direct sunlight and extreme temperatures.
6. Troubleshooting
-
Light strip does not turn on:
- Ensure the cigarette lighter connector is firmly plugged into the car's 12V power outlet.
- Check if the car's 12V power outlet is functioning correctly.
- Verify that the switch on the cigarette lighter connector is in the 'ON' position.
- Inspect the connection between the light strip and the cigarette lighter connector for any loose connections.
-
Part of the light strip is not illuminating:
- As noted in the installation section, a small section at the end may not light up due to design. This is normal.
- If a significant portion is not lighting up, check for any visible damage or kinks in the strip.
-
Light strip flickers:
- Ensure a stable power connection from the cigarette lighter.
- Check for any loose wiring at the connector points.
-
Light strip short circuits after cutting:
- Always ensure the power is turned off and unplugged before cutting the light strip. Cutting while powered can cause a short circuit and damage the product.
- Ensure the insulation rubber sleeve is properly reinstalled on the cut end to prevent exposure.
7. Specifications
| Attribute | Detail |
|---|---|
| Brand Name | Fccemc |
| Item Type | Atmosphere lamp |
| Voltage | 12 V |
| Special Features | Can be cut |
| Color Options | Warm white / White |
| Length Options | 2M (78.74 inches), 4M (157.48 inches) |
| Light Strip Width | 1 cm |
| Light Strip Thickness | 0.4 cm |
| Suitable For | Car Trunk Lighting, models with cigarette lighter plugs in the trunk |
| Installation Method | Embedded installation |
Image: Visual representation of the available lengths (2M, 4M) and color options (Cold White, Warm White).
8. User Tips
- Custom Fit: Take advantage of the cuttable feature to perfectly fit the light strip to your specific trunk dimensions. Remember to re-insulate the cut end.
- Versatile Use: Beyond basic trunk lighting, consider using the strip for creating ambient lighting for events like picnics or as a unique element for surprise gifts, as shown in product images.
- Pre-Installation Test: Always test the light strip with your car's power supply before committing to full installation to ensure it functions correctly.
Image: Examples of the LED strip in various usage scenarios, including daily lighting, stall lighting, surprise gifts, and picnic camping.
9. Warranty and Support
This product is designed for durability and performance. For detailed information regarding warranty coverage, returns, or technical support, please refer to the official product page or contact the seller directly.
A user manual in PDF format is available for download. You can access it via the product page or by clicking here.