FSD FSD

Contents

E27 Ceiling Fan Lamp with Aromatherapy and 3-Color LED Light

Model: FSD

This manual provides essential information for the safe and efficient use of your new E27 Ceiling Fan Lamp. Please read it thoroughly before installation and operation.

1. Setup and Installation

The E27 Ceiling Fan Lamp is designed for easy, self-contained installation into a standard E27 socket. It supports both suspension and flush mounting, offering versatility for various room setups.

Universal E27 adjustable socket

Figure 1: Universal E27 adjustable socket, allowing adjustment in all directions.

Ceiling & Suspended Dual-use Easy Installation

Figure 2: Illustration of both suspension and flush mounting options for easy installation.

Installation Steps:

  1. Step 1: Prepare the Mounting Plate (for flush mounting or if a separate mounting plate is used)

    Loosen the two screws on the side of the base and remove the mounting plate. Drill holes on the wall based on the holes on the mounting plate, and insert rubber nails into the holes. Then fix the mounting plate to the wall using self-tapping screws, ensuring it is secure.

  2. Step 2: Connect Wiring and Mount the Lamp

    Connect the electric wire of the lamp body with the exposed electric wire of the wall, ensuring proper insulation. Align the hole on the side of the lamp body with the screw hole on the side of the hanging plate (if applicable) and stick it to the wall. Lock the screw with a screwdriver.

  3. Step 3: Screw into E27 Socket (for suspension mounting)

    For suspension mounting, simply screw the E27 base of the fan lamp into a standard E27 light socket until it is firmly in place. Ensure the power is off before installation.

Video 1: Product demonstration including installation and operation overview.

2. Operation

The fan lamp can be controlled via the included remote control or a wall switch (for basic on/off functionality).

Schematic Diagram of Smart Remote Control Buttons

Figure 3: Detailed schematic of the smart remote control buttons.

Remote Control Functions:

  • ON/OFF: Power on/off the entire unit.
  • LIGHT ON/OFF: Turn the light on or off independently.
  • FAN ON/OFF: Turn the fan on or off independently.
  • LIGHT + / LIGHT -: Adjust light brightness (stepless dimming).
  • FAN + / FAN -: Adjust fan speed (3 gears: Sleep Wind, Natural Wind, Strong Wind).
  • WW (Warm White): Set light to warm white color temperature.
  • NW (Neutral White): Set light to neutral white color temperature.
  • W (Cool White): Set light to cool white color temperature.
  • CCT + / CCT -: Adjust color temperature (Color Temperature + / Color Temperature -).
  • Night Mode: Activates a low-brightness setting suitable for nighttime.
  • Timer (1h, 2h, 4h): Set the fan and/or light to turn off automatically after 1, 2, or 4 hours.
Stepless 3-color dimming options

Figure 4: Stepless 3-color dimming options: White Light, Neutral Light, and adjustable brightness for warm ambiance.

3-speed wind adjustment

Figure 5: Three fan speed settings: Sleep Wind (gentle breeze), Natural Wind (comfort temperature), and Strong Wind (icy cooling).

Aromatherapy Function:

The fan lamp includes a built-in aromatherapy tablet slot. Insert your preferred fragrance tablet into the designated area. The fan's operation will circulate fresh air, diffusing the natural fragrance throughout the room to create a soothing scent and relieve stress.

Built-in aromatherapy tablet

Figure 6: The fan lamp features a built-in aromatherapy tablet for fragrance diffusion.

3. Maintenance

  • Cleaning: Ensure the power is off before cleaning. Use a soft, dry cloth to wipe the exterior of the fan lamp. Do not use abrasive cleaners or solvents.
  • Dust Removal: Periodically clean dust from the fan blades and vents to maintain optimal airflow and prevent overheating. A soft brush or compressed air can be used.
  • Aromatherapy Tablet Replacement: Replace the aromatherapy tablet as needed. Ensure the device is off before handling the tablet.
  • Bulb Replacement: The lamp uses a built-in LED chip and is not designed for user-replaceable bulbs. If the light source fails, please contact customer support.

4. Troubleshooting

Problem Possible Cause Solution
Fan/Light does not turn on. No power supply; loose wiring; remote control battery depleted. Check power connection. Ensure wiring is secure. Replace remote control batteries.
Fan is not working. Fan motor issue; fan setting is off. Ensure fan is turned on via remote. If problem persists, contact support.
Light is not working. Light setting is off; LED chip failure. Ensure light is turned on via remote. If problem persists, contact support.
Remote control not responding. Battery depleted; obstruction between remote and unit. Replace remote control batteries. Ensure clear line of sight to the fan lamp.
Unusual noise from fan. Loose components; dust accumulation on blades. Ensure secure installation. Clean fan blades. If noise persists, contact support.

5. Specifications

Product parameters and dimensions

Figure 7: Product parameters and dimensions.

Feature Detail
Model NumberFSD
Item TypeCeiling Fans
Installation MethodSelf-contained
Body MaterialPlastic, PVC
Light SourceLED (Built-in LED Chip)
Base TypeE27
Nominal Voltage120V-240V (AC)
Power30W
Luminous Flux249-2000
Is DimmableYes (Stepless dimming)
Number of Lights1 pcs
Control MethodWall Control, Remote Control
Fan Speeds3 (Sleep, Natural, Strong)
Noise LevelAs low as 27dB
FeaturesAromatherapy, Multi-speed Wind, 3 Color Changing LED, Rapid heat dissipation, powerful whole-house ventilation
FinishBrushed Nickel
Blade Size10
Dimensions (Diameter x Height)25.5cm x 11.5cm
Weight0.5 kg
Applicable Space12-18m²
CertificationCE, CCC, EMC, ROHS
OriginMainland China
Noise level comparison chart

Figure 8: Noise level comparison, highlighting the fan lamp's ultra-quiet operation at 27dB.

6. Warranty and Support

This product comes with a 24-month quality guarantee from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.

For technical support, warranty claims, or further inquiries, please refer to the official product documentation or contact your retailer.

Additional item guides and documents, including a user manual in PDF format, may be available. Please check the product page or contact customer service for access to these resources.

7. User Tips

  • The adjustable lighting and fan speeds allow for a highly customizable environment, perfect for various activities from reading to sleeping.
  • Utilize the aromatherapy feature with your favorite fragrance tablets to enhance the ambiance and create a pleasant scent in your room.
  • The fan operates quietly, making it suitable for bedrooms or other areas where low noise is desired.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.