amagi Universal Cable Organizer Clips

Contents

Car Interior Cable Organizer Clips User Manual

Model: Universal Cable Organizer Clips | Brand: amagi

1. Introduction

The amagi Universal Cable Organizer Clips are designed to help you manage and conceal data cables, such as those for driving recorders, GPS devices, and car chargers, within your vehicle's interior. Made from soft, durable PVC material, these clips provide a neat and organized solution for cables with a diameter of less than 5mm, integrating seamlessly with your car's aesthetic.

2. Safety Information

  • Do not overload the clips with cables exceeding the recommended diameter (less than 5mm).
  • Observe safe operating procedures during installation to prevent injury or damage.
  • Avoid dropping the product to prevent damage.
  • Keep out of reach of children.

3. Product Specifications

FeatureDescription
MaterialPVC (Plastics)
ColorBlack
Single Clip DimensionsApprox. 180mm (Length) x 16mm (Width) x 5mm (Height)
Cable Diameter CompatibilityLess than 5mm
FunctionOrganizes and conceals various wires and data lines in car interiors.
Quantity OptionsAvailable in 4-piece or 8-piece sets.

The clips are multi-functional, durable, and easy to operate.

Diagram showing the dimensions of a single cable organizer clip: 180mm length, 16mm width, and 5mm height.
Figure 1: Dimensions of a single cable organizer clip.

4. Installation Instructions

Follow these steps for proper installation of the cable organizer clips:

  1. Prepare the Surface: Wipe the intended pasting position thoroughly with a detergent to remove any oil, dust, or protective agents. Ensure the surface is clean and dry for optimal adhesion.
  2. Prepare the Clip: Tear off the release paper from the double-sided tape on the back of the cable organizer clip.
  3. Insert Cable: Pass the data cable you wish to organize through the groove on the back of the product.
  4. Position and Paste: Carefully paste the clip in the desired reasonable position within your car's interior. Press firmly along the entire length of the clip to ensure good contact.
  5. Curing Time: To ensure the stability of the adhesive, do not apply any external force or stress to the wire sleeve within 24 hours after pasting.
Three-step diagram showing installation: 1. Peeling off double-sided tape. 2. Inserting a data cable into the clip's groove. 3. Pasting the clip onto a surface.
Figure 2: Visual guide for installation steps.
Installed cable organizer along a car's center console, showing a neat cable routing.
Figure 3: Example of installed cable organizer along a car's center console.
Cable routed from a car charger, secured by the organizer, demonstrating effective cable management.
Figure 4: Cable management using the organizer for a car charger.
Image showing scissors cutting the cable organizer, indicating it can be trimmed to length.
Figure 5: The cable organizer can be trimmed to fit specific lengths.

5. Operating Instructions

Once installed, the cable organizer clips function passively to hold your cables in place. No active operation is required. Ensure cables are securely seated within the grooves to prevent them from slipping out.

6. Maintenance

The cable organizer clips require minimal maintenance. Periodically check the clips to ensure they are still securely adhered and that cables are properly seated. If dust accumulates, gently wipe the clips with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners.

7. Troubleshooting

  • Clip not adhering properly: Ensure the surface was thoroughly cleaned and dry before installation. Re-clean the surface and apply a new clip if necessary. Allow the full 24-hour curing time without disturbance.
  • Cable slipping out: Verify that the cable diameter is less than 5mm. Ensure the cable is fully pushed into the groove.
  • General Functionality Issues: If the product is not functioning as expected, please contact customer support for assistance.

8. User Tips

  • Plan your cable routing before applying the clips to ensure a clean and efficient setup.
  • For longer cable runs, use multiple clips spaced appropriately to maintain tension and neatness.
  • The soft PVC material allows for trimming the clips to custom lengths if needed for specific applications.

9. Warranty and Support

For any product-related inquiries, technical support, or warranty claims, please refer to the official seller's contact information or the platform's customer service channels. A user manual in PDF format is also available for download: User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.