MatSee Plus PJ-ZGD01

Contents

MatSee Plus PJ-ZGD01 Smart Life ZigBee Garage Door and Sliding Gate Opener

Model: PJ-ZGD01 | Brand: MatSee Plus

MatSee Plus ZigBee Garage Door Opener main product image

The MatSee Plus PJ-ZGD01 ZigBee Garage Door and Sliding Gate Opener allows for smart control of your garage door or sliding gate via the Tuya Smart or Smart Life app, and integrates with voice assistants like Amazon Alexa and Google Home. This device requires a Tuya ZigBee Gateway for operation.

1. Setup

1.1 Package Contents

Ensure all the following items are included in your package:

  • Smart Garage Door Controller Module
  • 5m Sensor Cable
  • 0.5m Wire
  • Screws
  • Double-sided adhesive tapes / Brackets (for sensor fixation)
  • User Manual (PDF)
Package contents of the MatSee Plus ZigBee Garage Door Opener

Image: Contents of the product package, including the module, cables, and accessories.

1.2 Compatibility Check

Before installation, verify that your existing garage door opener is compatible with this module. Use pliers to short-circuit the wall button terminals on your opener. If the garage door opens or closes, it is compatible with the smart controller.

Diagram showing how to test garage door opener compatibility by short-circuiting terminals

Image: Diagram illustrating the compatibility test by short-circuiting the wall button terminals.

Close-up of garage door opener wiring terminals

Image: Close-up view of typical garage door opener wiring terminals.

1.3 App Download

Download the Smart Life or Tuya Smart app from your device's app store (App Store for iOS, Google Play Store for Android).

QR code for Smart Life app QR code for Tuya Smart app

Image: QR codes for downloading Smart Life and Tuya Smart apps.

1.4 Gateway Requirement (ZigBee Version)

This device is a ZigBee product and requires a Tuya ZigBee Gateway (hub) to function. It cannot directly receive 2.4G WiFi signals.

Diagram showing ZigBee gateway connection for the smart garage door opener

Image: Diagram illustrating the connection of the ZigBee garage door opener module to a Tuya Gateway/Hub and then to the smartphone app.

1.5 Wiring Diagram

Important: Power off your existing garage door opener before wiring. The wire order for the signal cable does not matter.

  1. Connect the AC power (AC100-240V 50/60Hz) to the 'L' and 'N' terminals on the module.
  2. Connect the sensor cable to the 'S1' and 'S2' terminals.
  3. Connect the signal control cable to the 'S3' and 'S4' terminals. These terminals connect to the two terminals on your existing garage door opener that are used for the wall button.
Detailed wiring diagram for the smart garage door controller

Image: Detailed wiring diagram showing connections for AC power, sensor, and wall button to the module.

Alternative wiring diagram for the smart garage door controller

Image: Alternative wiring diagram for the smart garage door controller.

1.6 Sensor Installation

Keep your garage door closed during sensor installation. Find a suitable position on the garage door to mount the sensor. You can use the included double-sided adhesive tapes, screws, or brackets for fixation.

Ensure the distance between the two sensor parts is less than 30mm when the garage door is closed, and they are well separated when the garage door is open.

Diagram showing sensor installation method A on a garage door

Image: Diagram illustrating sensor installation method A, showing placement on the wall and garage door.

Diagram showing sensor installation method B with brackets and example photos

Image: Diagram illustrating sensor installation method B using brackets, along with example photos of installed sensors.

1.7 Pairing with the App (ZigBee Version)

  1. Power on the Smart Garage Door Controller.
  2. Open the Smart Life or Tuya Smart app and navigate to your ZigBee Gateway.
  3. Press the pairing button on the module for 5 seconds until the module's indicator light flashes.
  4. In the app, click the '+' or 'Add subdevice' option to discover and add the device.
  5. Once successfully added, you can control the device via the app.
App screen showing device pairing process for ZigBee gateway

Image: App screen demonstrating the device pairing process with a ZigBee gateway.

App screen showing successful device addition and control interface

Image: App screen displaying successful device addition and the main control interface for the garage door opener.

Watch this video for a visual guide on unboxing, pairing, and app functionality:

Video: Unboxing, pairing, and demonstration of app functionality for the ZigBee garage door opener.

1.8 Deployment

We recommend deploying the smart device on top of your existing garage door opener. Use the provided double-sided adhesive tapes for fixation if necessary.

Diagram showing recommended deployment of the smart device on top of a garage door opener

Image: Diagram illustrating the recommended placement of the smart module on top of the garage door opener, connected to its power cord.

After deployment, power on both your existing garage door opener and the smart garage door opener. Wait approximately 1 minute for the smart garage door opener to reconnect to the cloud service automatically.

2. Operating Instructions

2.1 App Control

Control your garage door or sliding gate remotely using the Smart Life or Tuya Smart app. You can open or close the door from anywhere, and monitor its real-time status.

Image showing remote control of a garage door from a car using a smartphone app

Image: Remote control of a garage door from a car using the smartphone app.

App screenshot showing real-time monitoring of garage door status

Image: App screenshot displaying the real-time status (open/closed) of the garage door.

2.2 Voice Control (Amazon Alexa & Google Home)

Integrate your device with Amazon Alexa or Google Home for convenient voice control. Ensure your device is named consistently in the Smart Life/Tuya app (e.g., "Garage Door").

To control via Alexa:

  • "Alexa, turn on 'Garage Door'."
  • "Alexa, turn off 'Garage Door'."

To control via Google Home:

  • "Hey Google, turn on the 'Garage Door'."
  • "Hey Google, turn off the 'Garage Door'."
Image showing voice control interaction with Alexa and Google Home devices for a garage door

Image: Example of voice control using Amazon Alexa and Google Home devices to operate the garage door.

2.3 Timing Schedule and Timer Function

Set schedules for your garage door to open or close automatically at specific times. You can also use the countdown function for temporary access.

App screenshot showing timing schedule settings for the garage door

Image: App screenshot demonstrating the timing schedule setup for automatic garage door operation.

App screenshot showing countdown function settings for the garage door

Image: App screenshot illustrating the countdown function, useful for temporary access like package delivery.

2.4 Device Sharing

Share control of your smart garage door opener with family members. After they register a Tuya account, you can authorize device control through the "Share Device" feature in the app.

App screenshot showing the device sharing feature with family members

Image: App screenshot demonstrating how to share device control with family members.

3. Maintenance

The MatSee Plus PJ-ZGD01 is designed for low maintenance. Keep the device and sensor clean and free from dust or debris. Periodically check all wiring connections to ensure they are secure. No user-serviceable parts are inside the module.

4. Troubleshooting

  • Device not pairing: Ensure you have a Tuya ZigBee Gateway and it is properly configured. Make sure your smartphone and the garage door controller are within range of the ZigBee Gateway during pairing. Press the pairing button on the module for 5 seconds until the indicator light flashes. If the LED is not blinking, try resetting the device (refer to app instructions for specific reset methods).
  • App connectivity issues: Verify your ZigBee Gateway is connected to a 2.4GHz Wi-Fi network. Ensure your smartphone has a stable internet connection.
  • Garage door not responding: Double-check all wiring connections, especially the signal control cable to the wall button terminals. Confirm the sensor is correctly installed and its parts are within 30mm when the door is closed. Re-verify compatibility of your garage door opener (see section 1.2).
  • Voice control not working: Ensure the device name in your Smart Life/Tuya app matches the name you are using with Alexa or Google Home. Confirm that your Smart Life/Tuya account is linked to your Alexa/Google Home app.

5. Specifications

Feature Specification
Brand Name MatSee Plus
Model Number PJ-ZGD01
Wireless Communication ZigBee (requires gateway)
Compatibility Tuya Smart / Smart Life App, Amazon Alexa, Google Home
Power Source AC 110-240V 50/60Hz
Output No (Dry Contact Control)
State of Assembly Ready-to-Go
Battery Included No
Inbox Adaptor No
Garage Open/Closed Detector Wire 5M
Supported OS Android, iOS
Material ABS, PC
Pulse Time 1 second
Certification CE, RoHS

5.1 Dimensions

Diagram showing the mini size dimensions of the smart module

Image: Diagram indicating the compact dimensions of the smart module (46mm x 46mm x 18mm).

6. User Tips

  • The device pairs immediately with Zigbee2Mqtt and integrates well with Home Assistant.
  • A power supply (AC 110-240V) is NOT included in the package and must be provided separately.
  • This ZigBee device is not compatible with Ethernet (RJ45) cables as it relies on ZigBee for communication with a gateway, which then uses Wi-Fi.
  • The opener is compatible with lateral sliding gates, provided the gate opener has a wall button terminal that can be short-circuited to trigger opening/closing.

7. Warranty and Support

For detailed warranty information and further support, please refer to the official product documentation. The device is certified with CE and RoHS standards, ensuring compliance with European safety and environmental regulations.

A comprehensive user manual in PDF format is available for download: View User Manual (PDF)

All products undergo strict quality control testing before delivery.

Images showing product quality control and testing facilities

Image: Photos of product quality control and testing facilities, emphasizing rigorous checks.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.