Tinsol FYJ-1508

Contents

TINSOL Multifunctional Electric Grooming Kit User Manual

Model: FYJ-1508

1. Introduction

Thank you for choosing the TINSOL Multifunctional Electric Grooming Kit. This 3-in-1 device is designed for versatile grooming, functioning as an electric hair clipper, a body shaver, and a nose hair trimmer. It features a powerful motor, long-lasting battery, and skin-friendly blades for a comfortable and efficient grooming experience.

TINSOL grooming kit with main unit, charging base, various attachments, guide combs, cleaning brush, and USB-C charging cable.
Figure 1: TINSOL Grooming Kit with all included accessories.
The product packaging, showing the '3 IN 1 PROFESSIONAL SHAVER SET' box alongside the main unit, charging base, various attachments, and charging cable.
Figure 2: Product packaging and contents.

2. Safety Information

  • This product is not suitable for children under 14 years old.
  • The blades are sharp. Exercise caution when using and cleaning to avoid direct contact with fingers.
  • If you experience any skin discomfort, redness, swelling, or allergic reactions after shaving, immediately stop using the device and rinse the affected area with clean water.
  • Do not immerse the main unit in water. The blades are washable, but the main body should be kept dry.
  • Keep the device away from water sources when charging.

3. Product Components

The TINSOL Grooming Kit includes the following:

  • Main Unit (with digital display)
  • Hair Clipper Head (Trim Stainless Steel Blade)
  • Body Shaver Head (3D Curved Multi-Function Blade)
  • Nose Hair Trimmer Head
  • Two Guide Combs (for hair clipper)
  • Cleaning Brush
  • USB-C Charging Cable
  • Charging Base
Image highlighting three upgraded features: full body hair removal (clean and neat), powerful motor (internal view with blue light effect), and three-head design (showing the three interchangeable heads).
Figure 3: Upgraded features and three-head design overview.
Close-up view of the three specialized heads: Trim Stainless Steel Blade (for smooth shaving), Ear and Nose Hair Trimmer Head (for easy nose hair trimming), and 3D Curved Multi-Function Blade (for full-body hair removal).
Figure 4: Detailed view of the interchangeable grooming heads.

4. Setup and Charging

4.1 Initial Charging

Before first use, fully charge the device. Connect the USB-C charging cable to the charging base and plug it into a suitable power source. Place the main unit onto the charging base. The digital display will indicate the charging status. A full charge takes approximately 2 hours and provides about 85 minutes of usage time.

The main unit with the hair clipper head attached, standing on its charging base.
Figure 5: Main unit on charging base.

4.2 Attaching/Detaching Heads

To change grooming heads, gently pull the currently attached head upwards to remove it from the main unit. Align the desired head with the main unit and push down until it clicks securely into place.

4.3 Attaching Guide Combs

For the hair clipper head, select the appropriate guide comb. Slide the comb onto the clipper head until it locks into position. Ensure it is firmly attached before use.

5. Operating Instructions

Always ensure your face and skin are dry and clean before use for optimal results.

5.1 Using the Hair Clipper/Trimmer Head

  • Attach the hair clipper head and a suitable guide comb if desired.
  • Turn on the device.
  • If your hair or beard is relatively long, it is recommended to trim it to within 6mm for a more comfortable experience.
  • Move the clipper slowly and evenly against the direction of hair growth.
The R-Type rounded blade head of the trimmer, designed to be gentle and skin-friendly with an R-shaped blade edge for safe skin contact, shown trimming hair.
Figure 6: Hair clipper head in action, showing R-Type rounded blade.

5.2 Using the Body Shaver Head

  • Attach the body shaver head.
  • Turn on the device.
  • Hold the shaver at a 45-degree angle against the skin.
  • Move the shaver slowly and evenly in the direction of hair growth.
  • For areas that are hard to shave, such as the neck and chin, gently stretch the skin and use short, slow movements.
Close-up of the dual-blade shaver head, highlighting the arched blade mesh for close skin contact and a smooth curved blade for safe hair removal without damage.
Figure 7: Dual-blade shaver head detail.

5.3 Using the Nose Hair Trimmer Head

  • Attach the nose hair trimmer head.
  • Turn on the device.
  • Gently insert the trimmer tip into your nostril or ear canal.
  • Move it in a circular motion to trim unwanted hair. Do not insert too deeply.
A man using the nose hair trimmer attachment, demonstrating its use for daily grooming.
Figure 8: Using the nose hair trimmer.

6. Maintenance and Cleaning

6.1 Cleaning the Blades

The grooming heads feature removable and washable blades. After each use:

  1. Turn off the device.
  2. Remove the attached grooming head.
  3. Use the provided cleaning brush to remove any loose hairs from the blades.
  4. Rinse the blades under running water. Ensure the main unit does not get wet.
  5. Allow the blades to air dry completely before reattaching or storing.

6.2 Storage

Store the device and its accessories in a cool, dry place, away from direct sunlight and out of reach of children.

7. Troubleshooting

Problem Possible Cause Solution
Device does not turn on Low battery or no charge Charge the device fully (approx. 2 hours).
Poor trimming/shaving performance Blades are dull or clogged with hair Clean the blades thoroughly. Ensure hair is pre-trimmed if very long.
Skin irritation after use Sensitive skin, improper technique, or dirty blades Ensure skin is clean and dry. Use gentle, slow movements. Clean blades regularly. If irritation persists, discontinue use.
Attachments not fitting securely Incorrect alignment or debris Ensure the head is correctly aligned with the main unit and pushed down until it clicks. Check for any obstructions.

8. Specifications

Feature Detail
Brand Name Tinsol
Model FYJ-1508
Blade Material Stainless steel
Power Type Rechargeable
Power Source Rechargeable
Charging Time 2 hours
Usage Time 85 minutes
Voltage Type-C/USB
Function Dry haircut, Fast Charging
Length Adjustment Method Change of nozzles (guide combs)
Minimum Haircut Length More than 2 mm
Target Audience Adults
Motor Type Vibrating
Certification RoHs, CE
Cleaning Method Removable blade, washable
Material ABS, steel blade
Detailed diagram showing the dimensions of the main unit (16cm/6.36in), shaver head (4.8cm/1.89in), nose trimmer head (4.8cm/1.89in), charging base (5cm/1.97in), and guide combs (5.5cm/2.17in x 4.5cm/1.77in and 3.2cm/1.26in x 3.5cm/1.38in).
Figure 9: Product dimensions and component sizes.

9. User Tips

  • For best results, always ensure your skin is clean and dry before grooming.
  • If trimming a long beard or hair, use the clipper head with a guide comb to reduce length before using the shaver head for a closer finish. This prevents pulling and ensures a smoother shave.
  • Regularly clean the blades after each use to maintain hygiene and optimal cutting performance. A build-up of hair can reduce efficiency.
  • Store the device and its attachments properly to protect the blades and extend product lifespan.

10. Warranty and Support

For detailed instructions, safety guidelines, and warranty information, please refer to the official user manual PDF:

View User Manual (PDF)

This product is CE and RoHs certified, ensuring compliance with European safety, health, and environmental protection standards.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.