1. Introduction
Thank you for choosing the LED Car Door Projector Welcome Light. This product is designed to enhance your vehicle's aesthetics and provide functional illumination when the car door is opened. It projects a clear, high-definition image onto the ground, offering a unique welcome experience. This manual provides detailed instructions for proper installation, operation, and maintenance.

2. Safety Information
- Always turn off the vehicle's power supply before attempting any installation or maintenance.
- Ensure all connections are secure to prevent electrical shorts or malfunctions.
- If you are unsure about any step, it is recommended to seek professional assistance.
- Do not modify the product in any way, as this may void the warranty and cause damage.
3. Package Contents
Your package should contain the following items:
- 2 x LED Car Door Projector Welcome Light Units

4. Specifications
| Feature | Specification |
|---|---|
| Voltage | 12 V |
| Power Consumption | 7W |
| Material | ABS+PVC |
| Life Span | More than 80,000 hours |
| Certification | CE, RDW E4 standard authentication |
| Dimensions (approx.) | Length: 65mm, Height: 26mm, Width: 22mm |
| Item Type | Welcome Light |


5. Installation
This product is designed for easy installation, replacing your existing door lights without requiring drilling or wiring modifications. Follow these steps carefully:
- Prepare for Installation: Turn off your vehicle's power supply. Locate the existing light unit at the inner bottom part of the car door.
- Remove Old Component: Carefully pry out the old light unit using a suitable tool. Disconnect the wiring harness from the old light.
- Connect New Light: Align the new welcome light unit with the installation position. Connect the positive and negative poles of the welcome light to the corresponding poles of the door light's power cable.
- Secure New Light: Insert the new welcome light unit into the opening until it clicks securely into place.
- Test Functionality: Open the car door to check if the light turns on normally, if the projected pattern is clear, and if the installation position is appropriate.


Installation Video Guide
Watch this video for a detailed demonstration of the installation process.
6. Operation
The LED Car Door Projector Welcome Light operates automatically. When the car door is opened, the light will illuminate, projecting the chosen image onto the ground. When the door is closed, the light will turn off.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the lens and housing of the light unit. Avoid abrasive cleaners or solvents.
- Inspection: Periodically check the light units for any signs of damage or loose connections.
- Image Clarity: If the projected image becomes blurry or dim, ensure the lens is clean and free from obstructions.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Loose connection, incorrect wiring, faulty unit. | Check all wiring connections. Ensure positive and negative poles are correctly connected. Test with another unit if available. |
| Projected pattern is unclear or dim. | Dirty lens, incorrect installation angle. | Clean the lens with a soft cloth. Adjust the light unit's position to ensure optimal projection. |
| Light flickers or turns off intermittently. | Loose wiring, unstable power supply. | Secure all connections. Ensure the vehicle's electrical system is stable. |
If any abnormalities occur that are not covered here, promptly troubleshoot issues with the circuit or installation position. If problems persist, contact customer support.
9. Warranty & Support
This product is covered by a guarantee that includes a refund if items are damaged upon arrival. For detailed information regarding warranty claims or technical support, please refer to the official product documentation or contact the seller directly.
For additional guides and documents, you may refer to the User Manual (PDF).