1. Introduction
Thank you for choosing our Car Door Projector Welcome Lights. This manual provides detailed instructions for the installation, operation, and maintenance of your new car accessories. Please read this manual thoroughly before installation and keep it for future reference.
2. Product Overview
These welcome lights are designed to project a distinguished MAZDA car logo onto the ground when the car door is opened, enhancing the aesthetic appeal and providing illumination. They feature super bright LED technology, are waterproof, dustproof, and designed for easy, non-destructive installation.

Figure 1: Individual Car Door Projector Welcome Light Component.

Figure 2: Various angles of the Car Door Projector Welcome Light, showing its design and internal components.

Figure 3: Product dimensions. The light measures approximately 4 cm in height, 3 cm in width, and 6 cm in length.
3. Specifications
| Feature | Specification |
|---|---|
| Item Type | Welcome Light |
| Model Name | For MAZDA Logo Light |
| Special Features | Show the distinguished car logo |
| LED Type | Cree Chip |
| Power Consumption | 5W (each LED bulb) |
| Voltage | 12V |
| Material | PVC + Aluminum alloy |
| Item Diameter | 3.1 inch |
| Item Weight | 0.08 kg |
| Work Environment Temperature | -40℃ to 105℃ |
| Life Span | More than 100,000 hours |
| Package Dimensions (L x W x H) | 11 cm x 4 cm x 4 cm |
| Package Weight | 0.05 kg |
| Origin | Mainland China |
4. Compatibility
These welcome lights are compatible with the following MAZDA models:
- For MAZDA 6 (Second Generation) 2008-2012
- For MAZDA CX-9 (First Generation) 2006-2016
- For MAZDA 8 2011-2015
- For MAZDA A8 2011-2013
- For MAZDA RUIYI 2009-2015
- For MAZDA RX-8 2003-2010
- For MAZDA MPV 2011-2015
- For MAZDA ATENZA 2008-2012

Figure 4: Visual comparison of the welcome light with an original door light and a list of compatible MAZDA models.
5. Installation Guide
Important Safety Precaution: Before beginning installation, turn off the vehicle's power supply to prevent electrical hazards.
- Locate Installation Position: Identify the installation position at the inner bottom part of the car door.
- Remove Original Component: If an old door light component is present, use a tool to gently pry it off and remove it.
- Disconnect Wiring: Carefully pull out the plug wire connected to the original light.
- Connect New Light: Align the new welcome light with the installation position. Connect the positive and negative poles of the welcome light to the corresponding positive and negative poles of the door light's power cord.
- Secure New Light: Insert the new welcome light into the docking hole and ensure it is securely fastened.
- Test Functionality: Open the car door to check if the light turns on normally, if the projected pattern is clear, and if the installation position is appropriate.

Figure 5: Visual guide for installation steps. This image illustrates the process of removing the original light, disconnecting wires, and installing the new projector light.
Video 1: A demonstration of the installation process for the car door welcome lights, showing how to remove the old light and install the new one.
6. Operation
Once installed, the welcome lights will automatically illuminate and project the MAZDA logo onto the ground when the car door is opened. The light will turn off when the door is closed. No manual operation is required for daily use.
7. Maintenance
The welcome lights are designed to be waterproof and dustproof, requiring minimal maintenance. To ensure optimal performance and clarity of the projected logo:
- Periodically wipe the lens and housing with a soft, damp cloth to remove any dirt or debris.
- Avoid using harsh chemicals or abrasive materials that could scratch the lens or damage the housing.
- Ensure the wiring connections remain secure and free from corrosion.
8. Troubleshooting
If you encounter any issues with your welcome lights, refer to the following common problems and solutions:
- Light does not turn on:
- Check the vehicle's power supply.
- Verify that the positive and negative wires are correctly connected.
- Ensure the light is securely seated in the installation position.
- Inspect the circuit for any loose connections or damage.
- Projected pattern is unclear or distorted:
- Clean the lens of the projector light.
- Ensure the light is properly aligned and fully inserted into the door panel.
- Check for any obstructions in the projection path.
- Light flickers or turns off intermittently:
- Inspect all wiring connections for looseness or corrosion.
- Ensure the light is receiving a stable 12V power supply.
If problems persist after attempting these solutions, please contact customer support for further assistance.
9. User Tips
- Always double-check your car's specific model and year against the compatibility list before purchasing to ensure a perfect fit.
- When removing the original light, use a non-marring pry tool to avoid damaging your car's interior trim.
- Ensure the projected logo is oriented correctly before fully securing the new light.
10. Warranty and Support
For any product-related inquiries, technical support, or warranty claims, please contact the seller directly. Keep your purchase receipt as proof of purchase. General support information may also be available through the platform where the product was purchased.
11. Important Safety Information
- Always disconnect the vehicle's power before performing any electrical work.
- Do not attempt to modify the product in any way, as this may void the warranty and could lead to malfunction or damage.
- Ensure the product is installed in a dry environment and protected from extreme temperatures outside its operating range.
- Keep the product out of reach of children.