1. Product Overview
The OSRAM XLZ CLASSIC 3.0 LED Headlight Bulbs are designed to provide superior illumination for your vehicle, offering enhanced brightness, a modern cool white light, and efficient heat dissipation. These bulbs are suitable for use as fog lights or main headlights (high/low beam) depending on your vehicle's compatibility.

Figure 1: OSRAM XLZ Classic 3.0 LED Headlight Bulbs and Packaging
2. Setup and Installation
These LED bulbs are designed for easy plug-and-play installation, fitting most car models. Always ensure your vehicle's engine is off and the lights are cool before beginning installation.
2.1 Safety Precautions
- Ensure the vehicle's ignition is off and the battery is disconnected before starting work.
- Allow existing bulbs to cool down completely before handling.
- Wear protective gloves to avoid touching the glass of the new LED bulbs, as oils from your skin can reduce their lifespan.
- If unsure, consult a professional mechanic.
2.2 Installation Steps
Refer to the diagram below for a visual guide. The general steps involve removing the old bulb and inserting the new LED bulb.

Figure 2: Installation Diagram
- Access the Bulb: Open your vehicle's hood and locate the headlight assembly. Depending on your car model, you may need to remove covers or other components to access the rear of the headlight.
- Disconnect Power: Unplug the electrical connector from the back of the existing halogen bulb (A1).
- Remove Old Bulb: Release the retaining clip or twist the old bulb counter-clockwise to remove it from the housing (A2, A3). Carefully pull out the old bulb (A4).
- Prepare LED Bulb: Some LED bulbs may have a detachable collar or adapter. Ensure it's correctly oriented if applicable (A5).
- Insert LED Bulb: Carefully insert the new OSRAM LED bulb into the headlight housing. Ensure it is seated correctly and securely (A6, A7).
- Secure Bulb: Re-engage the retaining clip or twist the LED bulb clockwise until it locks into place (A8).
- Connect Power: Plug the electrical connector onto the back of the new LED bulb (A9). Ensure a secure connection.
- Test Lights: Reconnect your vehicle's battery (if disconnected) and test the headlights/fog lights to ensure they function correctly (A10).
- Final Check: Ensure all covers and components removed earlier are reinstalled properly.
3. Operating Instructions
Once installed, the OSRAM XLZ CLASSIC 3.0 LED bulbs operate like your vehicle's standard lighting system. They are designed to provide immediate full brightness upon activation.
- Activation: Turn on your vehicle's headlights or fog lights using the standard controls in your vehicle.
- Beam Pattern: These bulbs are engineered for a uniform and accurate light pattern, reducing glare for oncoming drivers while providing increased light on the road.
- High/Low Beam: If installed as headlights, the bulbs will switch between high and low beam according to your vehicle's controls.

Figure 3: Light Pattern Comparison
4. Maintenance
LED bulbs generally require minimal maintenance due to their long lifespan and robust design.
- Cleaning: Periodically inspect your vehicle's headlight lenses. If they are dirty, clean them with a soft cloth and appropriate automotive lens cleaner to ensure maximum light output.
- Inspection: Occasionally check that the bulbs are securely seated in their housings and that electrical connections are firm.
- Heat Dissipation: The bulbs feature an O-FIN active heat dissipation system with silent optimized high-speed fans. Ensure the area around the bulb's heatsink is not obstructed to allow for proper airflow.

Figure 4: O-FIN Active Heat Dissipation System
5. Troubleshooting
If you encounter issues with your OSRAM LED headlight bulbs, try the following troubleshooting steps:
- Bulb Not Lighting Up:
- Check Connection: Ensure the electrical connector is firmly attached to the bulb.
- Check Polarity: While most LED bulbs are non-polar, some may require correct polarity. If the bulb doesn't light up, try flipping the connector 180 degrees and re-inserting it.
- Check Fuse: Verify your vehicle's headlight/fog light fuse is not blown.
- Re-seat Bulb: Ensure the bulb is fully seated and locked into the headlight housing.
- Flickering or Intermittent Operation:
- Loose Connection: Check all electrical connections for tightness.
- Vehicle Electrical System: Ensure your vehicle's electrical system is stable. Voltage fluctuations can sometimes affect LED performance.
- CANbus Compatibility: These bulbs are designed to be CANbus free, but in rare cases, some sensitive vehicle systems might require additional decoders.
- One Bulb Out: If only one bulb is not working, swap it with the working bulb to determine if the issue is with the bulb itself or the vehicle's wiring/power to that side.
If problems persist after these steps, it is recommended to consult a qualified automotive technician.
6. Specifications
Detailed technical specifications for the OSRAM XLZ CLASSIC 3.0 LED Headlight Bulbs:

Figure 5: Technical Data
| Feature | Specification |
|---|---|
| Model | H8, H11, H16 |
| Version | XLZ Classic 3.0 LED |
| Voltage | 12V (DC 9-16V) |
| Wattage | 40W / bulb (80W / pair) |
| Lumens | 4000LM / bulb (8000LM / pair) |
| Color Temperature | 6000K (Cool White) |
| Base Model | PGJ19-1, PGJ19-2, PGJ19-3 |
| Lifespan | > 50,000 hours |
| Waterproof Rating | IP68 |
| Heat Dissipation | Built-in Turbo Fan (O-FIN Active Heat Dissipation) |
| LED Chip Type | OSRAM Original CSP |
| Features | Quick start, Easy install, CANbus free |
| Package Includes | 2x OSRAM genuine headlight bulbs |
7. Warranty and Support
Your OSRAM XLZ CLASSIC 3.0 LED Headlight Bulbs come with a 2-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
For further detailed information or specific diagrams, you may refer to the official user manual PDF available at: OSRAM XLZ Classic 3.0 User Manual (PDF).
For technical support or warranty inquiries, please contact your retailer or OSRAM customer service.
8. User Tips
- Vehicle Compatibility: Always double-check your vehicle's bulb type (H8, H11, H16) before purchasing to ensure perfect fitment.
- Beam Adjustment: After installation, it's good practice to check your headlight alignment. Improper alignment can cause glare for other drivers or reduce your visibility.
- Clean Lenses: Keep your vehicle's headlight lenses clean for optimal light output and clarity.