SIMICAM JF-IPC-HS6110-IR1-VF

Contents

SIMICAM HD IP Camera User Manual

Model: JF-IPC-HS6110-IR1-VF

1. Introduction

This manual provides detailed instructions for the installation, configuration, and operation of your SIMICAM HD IP Camera. Please read this manual thoroughly before using the product to ensure proper setup and functionality.

1.1 Safety Information and Disclaimer

⚠️ Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.

This manual may contain some incorrect information, even though it was published with careful proofreading. New updates will be added to the next release without notice. Your valuable advice is really appreciated.

2. Product Overview

The SIMICAM HD IP Camera is a versatile surveillance solution designed for both indoor and outdoor use, offering high-resolution video, color night vision, and robust connectivity options.

SIMICAM 4K 8MP PoE IP Camera
SIMICAM 4K 8MP PoE IP Camera

2.1 Camera Components

Diagram of camera components including plastic body, microphone, HD lens, night vision LEDs, network port, and power port.
Detailed view of the camera components: Plastic body, Microphone, HD lens, Night Vision LEDs, Network port, and Power port.

2.2 Package Contents

Package contents showing PoE security camera, waterproof cover, and screws.
The package includes: 1x PoE security camera (4K/5MP/4MP options), 1x Waterproof cover, and 1x set of Screws.

3. Specifications

AttributeValue
Brand NameSIMICAM
ModelJF-IPC-HS6110-IR1-VF
Megapixels8MP
High Definition8.0 Megapixels
Lens (mm)3.6mm, 6mm, 2.8mm
Lens QuantitySingle Lens
Zoom TypeNone
Color Night VisionYes
IP RatingIP67
Special FeaturesWaterproof / Weatherproof
Power SupplyWith Poe, Normal
Power Supply(V)PoE 48V/ DC 12V
ConnectivityIP/Network Wired
Video Compression FormatH.264, H.265
AI FunctionsMotion Detection
App NameWanan Pro
Supported Mobile SystemsAndroid, iOS
Supported Operating SystemsWindows 10
InstallationWall Mounted, Pendant Mount
Shell MaterialPlastic
ColorWHITE
ProtocolOnvif
SceneIndoor and outdoor
CertificationCE, FCC

3.1 Physical Dimensions

Camera dimensions: 17.1cm length, 6.7cm height, 16.8cm depth, 7cm mounting base diameter.
Camera dimensions: 17.1cm (length), 6.7cm (height), 16.8cm (depth), 7cm (mounting base diameter).

3.2 Package Dimensions and Weight

  • Length: 21 cm
  • Width: 10 cm
  • Height: 9 cm
  • Weight: 0.257 kg

4. Setup

4.1 Connection Methods

The camera supports various connection methods, including direct connection to a PoE NVR, a PoE Switch, or a standard router with a 12V DC power adapter.

PoE Over Ethernet connection diagram showing camera connected to NVR via single Ethernet cable for both power and data.
PoE (Power Over Ethernet) connection: A single Ethernet cable provides both power and data, eliminating the need for extra power cables or adapters.
Diagram illustrating three connection methods: 1. Work with Stand PoE Switch (48-54V), 2. Work with Onvif PoE NVR (48-54V), 3. Work with Router (requires 12V DC power).
Three connection methods: 1. With a standard PoE Switch (48-54V), 2. With an Onvif PoE NVR (48-54V), 3. With a router (requires a 12V DC power adapter).

Important:

  1. IP Camera needs to work with a 12V Power adapter and Ethernet with a router if not using PoE.
  2. PoE camera can be powered by a PoE NVR or PoE Switch with NVR over Ethernet.
  3. PoE camera can also work as a standard IP camera, connecting with a 12V power adapter and Ethernet with a router.

4.2 IP Address Configuration (using IPCBatch Tool)

The camera is set to DHCP by default with Username: admin, Password: 123456. If you encounter issues or need a fixed IP, you can use the IPCBatch Tool.

Note: The IP network segment of the camera needs to be consistent with the network segment of the NVR, computer, and LAN. For example, if the camera IP is 192.168.1.10, the network segment of the camera is "1", then the NVR, the computer, and the LAN also need to be "1". It can also be uniformly set to other network segments as needed.

To modify the camera's IP address:

  1. Download and install the IPCBatch Tool from: https://www.vatilon.com/xflrjxz
  2. Launch the IPCBatch Tool.
  3. Search for the camera and select it.
  4. Set the desired fixed IP address, ensuring it does not conflict with other devices on your LAN.
  5. Ensure "Full Netcom" and "IP Adaptive" functions are enabled. These are enabled by default, but may be disabled if connecting to a third-party NVR.

4.3 Browser Access and Camera Settings

It is recommended to use the IE browser that comes with Windows. You may need to install a browser plug-in for the first visit.

  1. Enter the camera's IP address in the browser's address bar (e.g., http://192.168.0.100).
  2. Log in using the default username (admin) and password (123456).

4.4 Mobile App Installation and Setup (Wanan Pro)

For easy P2P monitoring, download and install the "Wanan Pro" app on your Android or iOS device.

QR code for Wanan Pro app download
Scan this QR code to download the Wanan Pro app.

Follow these steps to add your camera to the app:

App connectivity guide showing steps to download app, add device by scanning QR code, and view live video.
App Connectivity Guide: Step 1: Download App. Step 2: Add Device by scanning QR Code. Step 3: Live View.
  1. Register an APP account.
  2. Log in to the app and click on the "+" icon in the upper right corner.
  3. Click on the top right corner and select 'Cable'.
  4. Click "Next Step".
  5. Click "I Know" and then "Next Step".
  6. Click "Add" to successfully add your camera.

5. Operating Instructions

5.1 Motion Detection and Email Alarms

Human detection settings are similar to general motion detection settings. To set up email alarms:

  1. In the camera's web interface or app, navigate to the alarm settings.
  2. Enable "Send Email" in the motion detection or human detection settings. (Note: Some camera models may not support email alarms.)
  3. Open the SMTP service of your email provider. Obtain the third-party login authorization code for your email (if applicable). Reduce the security level of your email account if necessary, as alarm push information might otherwise be regarded as spam.
  4. Configure the email server settings (SMTP server, port, SSL/TLS encryption, sender email, recipient email, and email password/authorization code).
  5. Send a test email to verify the settings.

5.2 Night Vision Modes

The camera features intelligent dual light source modes, offering flexibility for night surveillance:

Comparison of Standard IR Night Vision (B&W) and Smart Full-Color Night Vision.
Smart Dual-Light Night Vision: Compare standard IR (black and white) with smart full-color night vision, which activates color when a person is detected.
  • Infrared at night: Provides black and white video in low light.
  • Full color at night: Maintains color video even in dark conditions.
  • Smart full color at night: The camera uses infrared light for black and white video when no one is present. When a person is detected, the white light activates, and the video switches to full color.

You can select your preferred night work mode in the camera settings. Ensure the camera firmware supports the selected mode.

5.3 Video Quality Enhancements (HDR & 3DNR)

Your camera incorporates advanced technologies to enhance video quality in various lighting conditions.

HDR (High Dynamic Range) technology for enhanced security monitoring.
HDR (High Dynamic Range) technology captures important details regardless of lighting conditions by adjusting brightness between the brightest and darkest points of the video.
3DNR (Digital Noise Reduction) for enhanced clarity in low-light situations.
3DNR (Digital Noise Reduction) filters out noise from low-light settings and motion, providing a cleaner, sharper image and reducing video file sizes.

5.4 Video Compression Format

The camera supports advanced H.265 compression, which offers significant advantages over older formats like H.264.

Comparison of H.264 and H.265 video compression, showing H.265 uses less storage and offers faster transmission and clearer picture quality.
H.265 compression is more efficient than H.264, saving 40%-50% of storage space, enabling smoother transmission, and providing clearer picture quality.

5.5 Setting Time Zone

To ensure accurate timestamps on your recordings, set the correct time zone:

  1. In the camera's web interface or app, navigate to 'Time Setting'.
  2. Select your local time zone (e.g., UTC-08:00).
  3. Adjust the date and time if necessary and save the settings.

6. Maintenance

  • Cleaning: Regularly clean the camera lens with a soft, dry cloth to ensure clear image quality. Avoid abrasive cleaners.
  • Firmware Updates: Check the manufacturer's website periodically for firmware updates to ensure optimal performance and security.
  • Environmental Protection: While the camera is IP67 waterproof, avoid prolonged exposure to extreme conditions beyond its operating temperature range.

7. Troubleshooting

  • Camera Not Found by NVR/Tool: Ensure "Full Netcom" and "IP Adaptive" functions are enabled in the camera settings. Verify that the camera's IP network segment is consistent with your NVR/computer/LAN.
  • Email Alerts Not Working: Double-check that "Send Email" is enabled in motion detection settings. Confirm your email provider's SMTP service is active, and you have the correct authorization code/app password. Temporarily reduce email security settings if necessary.
  • Spotlight Cannot Be Permanently Switched Off: Based on user feedback, the spotlight feature may not have an option to be permanently disabled in some configurations. It might be tied to smart night vision modes.
  • No Image/Poor Image Quality: Check power and network connections. Clean the lens. Verify resolution settings. Ensure sufficient lighting for optimal night vision.

8. User Tips

  • For NVR users, SIMICAM cameras are often praised for their straightforward integration and ONVIF compatibility.
  • Consider setting up the camera on an isolated IoT network without internet access if you prefer to manage it locally via its web interface and NVR, as this can enhance security.
  • Utilize the web interface for comprehensive configuration, as it offers more control than basic app settings.
  • Be aware that the spotlight for color night vision might not be permanently switchable off, which could be a factor for discreet installations.

9. Warranty and Support

9.1 Technical Support

For technical assistance, please contact: 453836824@qq.com

9.2 Additional Resources

A detailed user manual in PDF format is available for download. This PDF contains further instructions and diagrams that may not be fully replicated in this document.

You can view the PDF manual here: User Manual (PDF)

© 2024 SIMICAM. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.