1. Introduction
The BOAYAL G161 is a versatile 3-in-1 measuring tool combining an Angle Ruler, Laser Distance Meter, and Laser Tape Measure. Designed for precision and ease of use, it features a high-definition LCD display, Type-C rechargeable battery, and magnetic base for convenient operation. This manual provides detailed instructions for safe and effective use of your device.
Official product demonstration video showing the 3-in-1 functionality: Angle Finder, Level Finder, and Laser Distance Meter, including green laser visibility and compact design.
2. Product Features
- 3-in-1 Functionality: Combines Angle Ruler, Laser Distance Meter, and Laser Tape Measure.
- High-Definition LCD Display: Clear and accurate digital display, visible in dim indoor environments.
- Multiple Measurement Modes: Single measurement, continuous measurement, area measurement, volume measurement, Pythagorean theorem measurement, angle ruler mode, horizontal bubble mode, tape measure mode.
- Unit Switching: Supports meters (m), feet (ft), inches (in), centimeters (cm), millimeters (mm), and feet/inches.
- Data Storage: Stores up to 100 groups of data for easy review.
- Rechargeable Battery: Built-in 1000mAh lithium battery with Type-C charging interface.
- Durable Design: Sturdy PC plastic + aluminum alloy frame, dust-proof, waterproof, and anti-drop.
- Magnetic Attraction: Magnets on the back and bottom for convenient attachment to metal surfaces.
- Green Laser: Enhanced visibility and power efficiency.
- Automatic Shutdown: Device automatically shuts down after 3 minutes of inactivity to save power.

Overview of the G161's various measurement functions.
3. Appearance Description

Detailed view of the G161's components.
- Liquid Crystal Display (LCD): Shows measurement results, functions, and settings.
- Power on/Off Button: Long press to power on/off the device.
- Function Key (FUNC SET): Short press to enter function switch menu or system settings.
- Measurement Key (MEAS): Short press to turn on laser, trigger measurement, or confirm selection.
- Laser Receiving Window: Receives the reflected laser beam for distance calculation.
- Laser Emission Hole: Emits the laser beam for measurement.
- Type-C Charging Port: For charging the built-in lithium battery.
4. Setup and Operation
4.1. Power On/Off
- Power On: Long press the Power button. The power-on screen will display the battery level, current function, angle, and unit.
- Power Off: Long press the Power button again.
4.2. Function Selection
After powering on, short press the FUNC SET key to enter the function switch menu. Use the Power or MEAS keys to navigate and select a function, then press FUNC SET to confirm and enter the corresponding interface.
4.3. Measurement Modes
4.3.1. Single Measurement (Length)
- Short press MEAS to turn on the laser point.
- Aim the laser point at the target.
- Press MEAS again to trigger a single measurement. The result will be displayed instantly.

Example of a single distance measurement.
4.3.2. Continuous Measurement (Length Scan)
- Long press MEAS to enter continuous measurement mode.
- Move the instrument to measure. The display shows MIN (minimum value) and MAX (maximum value), with the current value at the bottom.
- Short press any button to stop. A 30-second countdown is active; measurement stops automatically when it ends.

Continuous measurement mode displaying maximum and minimum values.
4.3.3. Area Measurement
- Short press MEAS to turn on the laser.
- Aim at the first target (length) and press MEAS.
- Aim at the second target (width) and press MEAS. The area is automatically calculated and displayed.

Example of area measurement.
4.3.4. Volume Measurement
- Short press MEAS to turn on the laser.
- Measure length, width, and height sequentially by aiming and pressing MEAS for each dimension.
- The volume is automatically calculated and displayed.

Example of volume measurement.
4.3.5. Pythagorean Theorem Measurement
- Short press MEAS to turn on the laser.
- Measure the required sides of the triangle by aiming and pressing MEAS for each.
- The device will automatically calculate the unknown side using the Pythagorean theorem.

Example of Pythagorean theorem measurement.
4.3.6. Angle Ruler Mode
- Switch to angle ruler mode.
- Place the instrument on the surface to be measured. The tilt angle will be directly displayed.

Measuring an angle using the angle ruler mode.
4.3.7. Horizontal Bubble Mode
- Switch to electron bubble mode.
- Lay the instrument flat on a surface. The display will show a digital horizontal bubble for leveling.

Using the horizontal bubble mode for leveling.
4.3.8. Tape Measure Mode
- Switch to tape mode. The laser will automatically turn on.
- Point the laser at the measured surface and move the instrument. The measurement value will be displayed in real-time.

Real-time measurement in tape measure mode.
4.3.9. Backlight Mode
- Switch to backlight mode.
- Adjust the backlight for indoor or outdoor use. Dark field mode is recommended for dim interiors, while bright field mode is clearer for strong indoor light.
4.4. System Settings
Short press FUNC SET to enter the setting interface. Use Power or MEAS to switch between settings, then press FUNC SET to enter a specific setting. Short press Power to exit the setting interface and return to single measurement.
4.4.1. Unit Switching
- In system settings, select 'Unit switching'.
- Short press FUNC SET to cycle through units: m → ft → in → mm → cm → ft/inches.
- Short press Power to exit.

Steps for switching measurement units.
4.4.2. Reference Switching (Fore Basis/Back Basis)
- In system settings, select 'Reference switching'.
- Short press FUNC SET to toggle between front basis and back basis measurement.
- Short press Power to exit.
4.4.3. Storage Function
- In system settings, select 'Storage function'.
- Short press FUNC SET and MEAS to turn pages of stored data.
- Short press Power to delete the current page.
- Long press Power to exit storage mode.

The device can store up to 100 sets of measurement data.
4.4.4. Sound Switch
- In system settings, select 'Sound switch'.
- Short press FUNC SET to turn sound on/off.
- Short press Power to exit.
4.4.5. Screen Direction Switching
- In system settings, select 'Screen direction switching'.
- Short press FUNC SET to turn automatic screen direction on/off.
- When the screen is locked, a lock icon will be displayed.
- Short press Power to exit.
4.4.6. Time Delay Measurement
- In system settings, select 'Time delay measurement'.
- Short press FUNC SET to cycle through delay options: Delay 5s → Delay 3s → Turn-off delay.
- When a delay is set, the screen will show a countdown before measurement.
- Short press Power to exit.
4.4.7. Angle Calibration
- In system settings, select 'Angle calibration'.
- Short press FUNC SET to enter calibration mode.
- Place the instrument as shown in the manual (typically on a flat surface, then rotate to calibrate all 4 surfaces).
- After a "drop ~" sound and a checkmark on the screen, calibration is successful.
- Press FUNC SET to continue to the next surface calibration.
- The device will automatically exit after all 4 surfaces are calibrated. Short press Power to exit calibration.
5. Specifications
| Parameter | Value |
|---|---|
| Product Model | G161 |
| Angle Range | -90° ~ 90° |
| Angle Ruler Mode Angular Accuracy | ±0.4° |
| Angle Resolution in Inclinometer Mode | 0.01° |
| Range Measurement Range | 0.05 ~ 40 meters |
| Range Measurement Accuracy | ±3mm |
| Distance Unit | m, ft, in, cm, mm |
| Area Unit | m², ft², in², cm², mm² |
| Volume Unit | m³, ft³, in³, cm³ |
| Laser Type | 630~670nm |
| Laser Grade | CLASS II P<1mW |
| Operating Temperature | 0 ~ 40℃ |
| Storage Temperature | -10 ~ 60℃ |
| Data Storage | 100 groups |
| Screen | TFT 2.4 Color screen |
| Automatic Shutdown Time | 3min |
| Battery Capacity | 1000mAh |
| Charger Interface | Type-C |
| Weight | 101g |
| Size | 69.9*67.9*25.1mm |
| Certification | CE, FCC, WEEE, KC, RoHS |
| Frame Material | PC plastic + aluminum alloy |
| Battery Included | Yes |
| Battery Display | Yes |
| High-concerned chemical | None |
6. Troubleshooting
| Error Code | Cause of Error | Solution |
|---|---|---|
| Err10 | Low charge | Timely charging |
| Err08 | The measurement does not conform to the measurement logic, and the data is wrong | Measure according to measurement logic |
| Err26 | The data exceeds the display range | Switch to a larger unit |
| Err02 | Out of range | Please range the target within the range |
| Err16 | Instrument wobbles, signal error | Reduce body shaking, or change the measurement target |
| Err01 | Weak signal | Use a reflector with high reflectivity or select a high inverse target |
7. Maintenance
- Do not use organic solvents to clean this precision equipment.
- Keep the device away from water and corrosive substances.
- Do not damage the working surface of the machine.
- Clean any dirt with a soft cloth to maintain its accuracy.
- If the device is not used for 3 minutes, it will automatically shut down to save power.
8. User Tips
- For accurate angle measurements, ensure the device is placed on a stable and level surface or securely attached using its magnetic base.
- When measuring long distances, especially outdoors or in bright conditions, using a target plate or a highly reflective surface can improve laser visibility and measurement accuracy.
- Regularly check the battery level to avoid interruptions during critical measurements. The Type-C charging port allows for convenient recharging.
- Utilize the data storage function to keep track of multiple measurements, which is particularly useful for complex projects requiring several readings.
- Experiment with the backlight settings to optimize screen visibility in various lighting conditions, ensuring clear readings whether indoors or outdoors.
9. Warranty & Support
9.1. Warranty Period
All products are guaranteed for one year from the date of purchase. Please adhere to the following warranty regulations.
9.2. Warranty Coverage
During the warranty period, if the instrument is found to be faulty, it will be repaired, damaged parts replaced, or the instrument replaced with a new one, at the manufacturer's discretion.
9.3. Exclusions from Warranty
No warranty is provided for instruments that:
- Have been disassembled without authorization.
- Have suffered incorrect operation or manual damage.
- Have damage caused by not using original accessories.
- Have been given to an unauthorized person or unit for repair.
- Have had their serial number deleted.
9.4. Claiming Warranty
The warranty card must be provided when claiming warranty service. An invoice must also be provided if necessary.
9.5. Support
When repairing or replacing the instrument, please contact your local dealer for assistance.