SmarDeer L5001-TT-BT

Contents

SmarDeer IP65 Waterproof Sliding Door Smart Lock

Model: L5001-TT-BT

Instruction Manual

Introduction

The SmarDeer IP65 Waterproof Sliding Door Smart Lock (Model: L5001-TT-BT) is an advanced security solution designed for various door types, including narrow-frame glass doors, aluminum alloy doors, and wooden doors. This smart lock offers multiple convenient unlocking methods and robust features for enhanced security and accessibility.

Key features include an IP65 waterproof rating (some specifications indicate IP66), 5-in-1 unlocking methods, passage mode, anti-peep password design, and comprehensive control via the TTLock APP. For remote management and voice control integration with Alexa or Google Assistant, a separate G2 gateway is required.

SmarDeer IP65 Waterproof Smart Lock with components
SmarDeer IP65 Waterproof Smart Lock and its components.
Smart lock with water droplets, emphasizing IP65 waterproof rating
The lock features an IP65 waterproof rating, protecting against rain and dust.

Safety Information

  • Ensure proper installation to prevent malfunction and security risks.
  • Do not expose the lock to extreme temperatures or corrosive substances.
  • Keep mechanical keys in a safe place, separate from the lock.
  • Regularly check battery levels and replace batteries promptly when a low battery warning is issued.
  • Avoid using abrasive cleaners on the lock's surface.

Package Contents

Sliding door lock dimensions and package contents table
Diagram showing the lock dimensions and included items.

The package typically includes the following items:

Item Quantity
Outer panelx1
Inner panelx1
Lock bodyx1
Accessoriesx1
Mechanical keyx2
Batteryx1 (Note: 4x AAA batteries required)
Partsx1
IC cardx2
User manualx1
QCx1

Specifications

Feature Detail
Brand NameSmarDeer
Model NumberL5001-TT-BT
Power SupplyDRY BATTERY (4x AAA batteries)
Protection LevelIP66 (Waterproof)
Suitable for MortiseOther
Installation MethodDrilling installation
Fit Door Thickness35-55mm
Suitable Door TypeSteel Door, Wooden Door, Glass Door (especially narrow-frame)
Finish TypeOil Rubbed
ConnectivityBluetooth (Tuya WiFi compatible with G2 Gateway)
Ways To UnlockFINGERPRINT, Bluetooth, Card, Password, Mechanical Keys, App
MaterialAluminium alloy
Handle DirectionDirection Reversible
OriginMainland China
Package Length39 cm
Package Width20 cm
Package Height15 cm
Package Weight1.845 kg

Setup & Installation

This section provides instructions for installing your SmarDeer Smart Lock. Ensure you have all components listed in the Package Contents before beginning.

1. Door Preparation (Opening Holes)

The lock is suitable for wooden doors, plastic doors, and metal doors with a thickness over 30mm. Use the provided template to accurately mark and drill holes in your door. Ensure the holes align correctly with the lock and the door case for proper locking mechanism function.

Door hole drilling template
Door hole drilling template (refer to physical template for exact measurements).

2. Installing Lock Mortise

Insert the lock cylinder with its connecting line into the cylinder bore on the door, ensuring the 4P line is not damaged. Secure the cylinder with 4 flat countersunk head tapping screws. Then, install the mechanical lock with the key pore facing outwards into the cylinder bore and fix it with FM 5*65 Machine Screws. Test the mechanical key to ensure it can open and close the lock smoothly.

Mortise dimensions diagram
Mortise dimensions and installation details.
Sliding Door Mortise dimensions and lock panel details
Detailed view of the sliding door mortise and lock panel components.

3. Installing Front and Back Lock Panels

Before installing the lock panels, ensure the handle springs are in place and insert the handle square shafts into the lock cylinder. Pay attention to the handle direction: the downwards arrow is for right-opening doors, and upwards for left-opening doors. Connect the 3P line between the back body and the square shaft of the deadbolt. Fix the lock body with 4 pieces of FM 5*55 Machine Screws. Finally, load the batteries and secure the back covers.

Detailed dimensions of the lock panels and components
Exploded view of lock components for panel installation.

4. Initialization

Press the reset button on the PCB 5 times constantly. The lock will revert to default settings: Master password: 123456.

5. Setting Administrator Password

If no administrator password or mobile administrator is set, touch the panel and hear "Please add Bluetooth administrator". Add the door lock via the app. If an administrator password is not set, and no mobile phone administrator is added, enter *12#123456# then enter the administrator password # and confirm by entering the same password # again.

6. Adding Mobile Administrator

After setting an administrator password or adding a mobile administrator, you can enter *83#administrator password# on the lock to enter the mode for adding more mobile administrators. Other app accounts can then add this lock and become new administrators. Note: Only one first-level mobile administrator is allowed. Adding a new one will automatically delete the previous account's access.

Operation

Unlocking Methods

Diagram showing multiple unlocking methods (TTLock App, Fingerprint, Password, IC Card, Key)
The lock supports multiple unlocking methods for convenience.
  • Fingerprint Unlocking: Press your registered finger on the fingerprint device.
  • Password Unlocking: Enter the unlocking password on the keypad and press the # key.
  • IC Card Unlocking: Place the added IC card in the card swiping area.
  • Mechanical Key: Insert and turn the physical key.
  • TTLock App Unlocking: Click the lock icon in the TTLock app.
  • Remote Unlocking (Optional): Press the unlock button on a paired remote control.
  • Smart Voice Control (with G2 Gateway): Use voice commands with Alexa or Google Assistant.

TTLock App Control

Complete TTLock App Control interface
Overview of the TTLock App interface for comprehensive lock management.

The TTLock App allows for extensive management of your smart lock:

  • User Management: Add, modify, or delete users and their access methods (fingerprints, passwords, IC cards).
  • Unlock Record: View a history of all unlock events.
  • Share E-key: Send electronic keys to other users, granting them secondary administrator access.
  • Attendance Record: Track entry and exit times.
  • Remote Control: Manage the lock remotely via the app (requires G2 gateway).
Remotely App Control with G2 Gateway
Remote app control and smart voice integration require the G2 gateway (sold separately).

Password Management

  • Add Password: In the app, go to [Password] > [Get Password], select password type (permanent, limited time, single time, cycle), and enter the password. For custom passwords, operate on the lock edge.
  • Modify Password: In the app, go to [Password], select the password to modify, then [Password] > enter new password. On the lock keyboard, enter *10#original administrator password#new administrator password#same new administrator password#.
  • Delete Password: In the app, go to [Password], select the password to delete, then [Delete]. On the lock, enter *72#administrator password# to delete a specific password, or *71#administrator password# to delete all unlock passwords (excluding administrator passwords).
  • Virtual Password: Input any random numbers before or after the correct password to prevent others from seeing your actual code. The total length of the dotted password can be up to 16 digits.
Virtual Password feature explanation
The virtual password feature enhances security by allowing random digits before and after the actual code.

IC Card Management

  • Add IC Card: In the app, go to [IC Card] > [Add IC Card], enter name and validity period, then [Confirm] and swipe the card. On the lock, enter *80#administrator password# and swipe the card.
  • Modify IC Card Validity: In the app, go to [IC Card], select the card, then [Validity Period] > enter new validity period > save.
  • Delete IC Card: In the app, go to [IC Card], select the card, then [Delete]. On the lock, enter *69#administrator password# to delete all IC cards.

Fingerprint Management

  • Add Fingerprint: In the app, go to [Fingerprint] > [Add Fingerprint], enter name and expiration date, then [Next] > [Start Adding]. Press your finger multiple times on the collector as prompted. On the lock, enter *80#administrator password# and follow voice prompts.
  • Modify Fingerprint Expiration: In the app, go to [Fingerprint], select the fingerprint, then [Expiration Date] > enter new expiration date > save.
  • Delete Fingerprint: In the app, go to [Fingerprint], select the fingerprint, then [Delete]. On the lock, enter *70#administrator password# to delete all fingerprints.

Remote Control Management (Optional)

  • Add Remote Control: In the app, go to [Remote Control] > [Add Remote Control], select type (permanent, limited time, cycle), enter name and validity period, then [Confirm]. Long press the remote control lock button for 5 seconds.
  • Rename Remote Control: In the app, go to [Remote Control], select the remote control, then [Name] > enter new name.
  • Modify Remote Control Validity: In the app, go to [Remote Control], select the remote control, then [Validity Period] > enter new validity period > save.
  • Delete Remote Control: In the app, go to [Remote Control], select the remote control, then [Delete].

Lock Modes & Settings

  • Constant Open Mode (Passage Mode): Activate this mode during working hours for hassle-free entry and exit. Simply disable it after work hours. To activate, press 5# on the lock.
  • Constant Open Mode feature
    Constant Open Mode allows free passage without needing to unlock each time.
  • Automatic Locking: The lock can be set to automatically lock after a specified time (1-900 seconds) after unlocking. To enable, enter *21#administrator password#time#. To disable, enter *20#administrator password#.
  • Temporary Normally Open Mode: After unlocking (before locking), enter 123#. The lock will remain open until it is unlocked again, at which point it will return to the locked state after a timeout.
  • View Unlock Records: In the app, select the door lock, then [Operation Record] to view all unlock events.
  • Voice Switching: Change the voice prompt language. Chinese: *39#administrator password#1#. English: *39#administrator password#2#.
  • Lock Sound: Turn off/on lock sound. Enter *30#administrator password#0# to turn off, *30#administrator password#1# to turn on.
  • Lock Time Calibration: If the lock time is inaccurate, use the app's [Calibration Time] function or unlock via the app once to calibrate.
  • Demo Mode: By default, demonstration mode is off. To enable without an administrator, enter 24679# on the lock. Any card or password 123456 can then unlock the door. Demo mode automatically turns off once an administrator is set.

Generating Temporary Codes for Guests

Generating temporary codes for guests via TTLock App
The TTLock App allows you to generate custom, timed, one-time, or recurring access codes for guests.

You can share temporary digital keys to visitors through the TTLock App. These keys can be customized as:

  • Custom Codes: 4-6 digit codes.
  • Timed Codes: Valid only during a set date and time.
  • One-Time Codes: Work just once.
  • Recurring Codes: Weekly codes that repeat.

All codes can be generated remotely without a Wi-Fi gateway, except for custom codes.

Maintenance

  • Low Battery Warning: When the battery voltage drops below 4.8V, the panel will display "Low battery, please replace the battery" and the screen backlight will flash. Replace the 4x AAA batteries promptly.
  • Firmware Upgrade: The lock's firmware can be upgraded via the TTLock app. Go to [Settings] > [Lock Upgrade]. This operation must be performed at the lock's location.
  • Cleaning: Wipe the lock's surface with a soft, damp cloth. Avoid harsh chemicals or abrasive materials that could damage the finish or electronic components.

Video demonstrating the waterproof capabilities of the smart lock.

Troubleshooting

  • System Lock: If an unlocking password, card, or fingerprint is entered incorrectly 5 times consecutively, the system will lock the password keyboard for 2 minutes. During this period, the lock can only be unlocked via the app.
  • Aging Test: To enable the motor aging test (for diagnostic purposes), enter 35896# on the lock. Enter 35896# again or power cycle the lock to exit the test.
  • Resetting the Lock: To restore factory settings, long press the reset button on the lock until you hear "please enter the initialization password", then enter 000#. This will clear all passwords, cards, and mobile phone administrators.
  • Lock Not Responding: Check battery levels. If the lock is completely unresponsive, try replacing the batteries.

User Tips

  • For optimal security, regularly change your administrator password and avoid simple, easily guessable codes.
  • Utilize the virtual password feature to protect your actual code from prying eyes.
  • Keep your TTLock App updated to ensure access to the latest features and security enhancements.
  • If using the G2 gateway for remote access, ensure a stable Wi-Fi connection for reliable operation.
  • Consider setting up temporary access codes for visitors or service personnel instead of sharing permanent access.

Warranty & Support

For detailed warranty information and technical support, please refer to the official SmarDeer website or contact customer service.

A comprehensive user manual in PDF format is available for download: Download User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.