1. Product Overview
The Zombiescat S1 is a powerful bass Bluetooth headphone featuring ENC call noise canceling, cool LED lights, and an over-ear design for comfortable listening. It supports both wireless Bluetooth 5.1 and wired AUX connections.

Figure 1: Zombiescat S1 Headphones (Red variant)
Video 1: Zombiescat S1 Product Showcase
2. Setup Guide
2.1 Package Contents
Please check the box for the following items:
- 1 x S1 Headphone
- 1 x Charging Cable
- 1 x Audio Cable (AUX Cable)
- 1 x User Guide (Manual)
- 1 x Gift Box
2.2 Charging the Headphones
Before first use, it is recommended to fully charge your headphones. Use the provided charging cable to connect the headphones to a USB power source (e.g., computer USB port, USB wall adapter).
- Charging Status: Red light on.
- Fully Charged: Red light off.
- Charging Time: Approximately 2 hours.
2.3 Bluetooth Connection Instructions
- Keep the Bluetooth headphones and your phone (or other device) within 1 meter for optimal connection.
- Ensure the headphones are off. Slide the power switch to ON. The red and blue lights will flash alternately, indicating pairing mode.
- On your phone or other Bluetooth device, turn on Bluetooth and scan for devices.
- Select the device name: STMK-MGM-001.
- If prompted, enter PIN 0000 (this is not required for most phones).
- Once connected, the indicator light will change to a slow blue flash. Pairing is successful, and you can now make calls and play music.

Figure 2: Ergonomic design for comfortable fit
3. Operating Instructions
3.1 Indicator Status Guide
Refer to the following table for LED indicator meanings:

Figure 3: Indicator Status and Product Parameters
| Status | LED Indicator |
|---|---|
| Power-on Pairing | Red and blue lights flash alternately rapidly |
| Paired Successfully | Blue light flashes slowly |
| Disconnected | Red and blue lights flash alternately rapidly |
| Connected Standby | Blue light flashes slowly |
| Music Playback | Blue light flashes slowly |
| Call Status | Blue light flashes slowly |
| Power Off | Indicator off |
| AUX Mode | Indicator off |
| Low Battery | Red light flashes |
| Charging | Red light on |
| Fully Charged | Red light off |
3.2 Cool LED Lighting Effect
The headphones feature unique LED light patterns on both sides. These lights activate to enhance the aesthetic appeal of your headphones.

Figure 4: Cool LED Light feature in action
3.3 ENC Call Noise Cancellation
The built-in ENC (Environmental Noise Cancellation) microphone reduces background noise during calls, ensuring clear and interference-free communication even in noisy environments.

Figure 5: ENC Clear Call feature
3.4 AUX Wired Mode
You can switch to wired mode using the provided 3.5mm AUX cable. This is useful when the headphone battery is depleted or for devices without Bluetooth connectivity. Simply plug one end into the headphone's AUX port and the other into your audio source.
4. Maintenance and Care
- Cleaning: Do not clean the headphones with abrasive cleaners. Use a soft, dry cloth to wipe the surfaces.
- Storage: If not used for a long time, store the headphones in a dry place.
- Battery Care: To extend battery life, charge the headphones at least once a month, even if not in use. Avoid exposing the headphones to extreme temperatures, direct sunlight, fire, or excessive heat.
- Disassembly: Do not attempt to disassemble or modify the product. It contains no user-serviceable parts.
- Water Exposure: Do not use the headphones in the rain or expose them to excessive moisture.
5. Troubleshooting
- Headphones not turning on: Ensure the headphones are charged. Connect them to a power source and check the charging indicator.
- Cannot pair with device: Make sure the headphones are in pairing mode (red and blue lights flashing alternately). Ensure Bluetooth is enabled on your device and it's within 1 meter of the headphones. Try restarting both the headphones and your device.
- No sound: Check the volume levels on both the headphones and your connected device. Ensure the headphones are properly paired. If using AUX mode, ensure the cable is securely connected.
- Poor call quality: Ensure you are in an area with good signal strength. The ENC microphone works best when directly facing your mouth.
- Battery life shorter than expected: Ensure the headphones are fully charged before use. Extreme temperatures can affect battery performance.
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | Zombies Cat |
| Product Name | S1 Over-Ear Bluetooth Headphones |
| Product Model | QCWS-S1 |
| CPU Chip | AC6956 |
| Bluetooth Version | V5.1 |
| Bluetooth Range | 10 meters (Maximum wireless range: 10m-20m) |
| Battery Capacity | 400mAh / 3.7V |
| Charging Time | Approx. 2 hours |
| Usage Time | Approx. 8.5 hours (Battery life up to 40 hours as per seller description) |
| Speaker Size | 40mm (Driver Diameter: 40mm) |
| Impedance | 32Ω (Impedance Range: up to 32 Ω) |
| Frequency Response | 20 - 20000Hz |
| Sensitivity | 122dB |
| Max Output | 30mW |
| Material | PC+ABS, Plastic, Leather |
| Weight | 210g |
| Charging Method | Cable (Type-C connector) |
| Features | Waterproof, With microphone, Apple Siri Support, Detachable Cable, Google Assistant Support |
| Codecs | AAC, SBC |

Figure 6: Stable Bluetooth 5.1 connectivity

Figure 7: Long battery life for extended use
7. User Tips
- First Use: For optimal performance and to verify battery life, fully charge your headphones before the very first use.
- Battery Life Discrepancy: Note that while the product description mentions up to 40 hours of battery life, the included manual states approximately 8.5 hours. Actual battery life may vary based on volume level, LED light usage, and other factors.
- Comfort: The ergonomic design with protein leather ear cushions is intended for long-term comfort. Adjust the headband and earcups for the best fit.
- Wired Mode for Gaming: For ultra-low latency in gaming, use the provided AUX cable to connect your headphones directly to your device.
8. Warranty and Support
8.1 Warranty Policy
- Within 7 days after receipt: Free return or exchange for non-human-induced defects (untampered, full accessories, intact packaging, no scratches; otherwise, return is not allowed).
- Within 15 days after receipt: Free exchange for non-human-induced defects (verified by Qingcheng Service Center).
- Within 6 months after receipt: Free repair for non-human-induced defects (verified by Qingcheng Service Center).
- For non-human-induced defects with damaged packaging or missing accessories: Only repair is provided; no return or exchange.
For further assistance or warranty claims, please contact your seller or the authorized service center.
A PDF version of this user manual may be available from the seller for download.