1. Introduction
The Kodak Charmera Keychain Digital Camera reimagines the retro charm of Kodak's 1987 single-use camera with a modern digital twist. This compact and portable camera is designed for everyday snapshots, capturing moments with ease and a nostalgic aesthetic. It features various frames and filters to add a unique touch to your photos and videos.

Image: A collection of Kodak Charmera Keychain Digital Cameras, showcasing their diverse retro designs.
2. What's in the Box
Please check that all the following items are included in your package:
- Kodak Charmera Keychain Digital Camera
- Keyring
- USB-C Cable
Note: A Micro SD card is NOT included and must be purchased separately for full functionality.

Image: The Kodak Charmera camera, keyring, and USB-C cable displayed alongside the product packaging.
3. Parts and Controls
Familiarize yourself with the camera's components:
| Component | Description |
|---|---|
| Shutter Button | Press to take photos or start/stop video recording. |
| On/Off Button | Long press to power the device on or off. Also used for menu navigation. |
| Indicator Light | Shows charging status (red), power on (blue), and other operational states. |
| USB-C Port | For charging the camera and transferring files to a computer or Android phone. |
| Reset Hole | Use a pin to reset the device if it freezes or malfunctions. |
| Memory Card Slot | Insert Micro SD (TF) card here (1GB-128GB). |
| Up/Down Buttons | Navigate through menus, select filters/frames, and browse files. |
| Play/OK Button | Confirm selections, enter modes, or play files. |
4. Setup
4.1. Charging the Battery
- Before first use, fully charge the device. Connect the camera to a charger, computer, or power bank using the provided USB-C cable.
- The indicator light will turn red during charging. It will turn off once charging is complete.
- If the battery is low, the device may not turn on. Charge it before use. The camera cannot be used while charging.
4.2. Inserting a Memory Card
- Locate the Memory Card Slot on the camera.
- Gently insert a Micro SD (TF) card (1GB-128GB) into the slot until it clicks into place. Ensure the card is oriented correctly.
- To remove, gently push the card further in until it springs out.
5. Operating Instructions
5.1. Power On/Off
- Power On: Long press the On/Off button for 3 seconds. The indicator light will turn blue.
- Power Off: Long press the On/Off button for 2 seconds. The indicator light will turn off.
5.2. Taking Photos
- After inserting the memory card, power on the camera.
- Select the photo icon (usually on the left-hand side of the screen) and press the Play/OK button to enter photo mode.
- Press the Up or Down buttons to cycle through different photo filters and frames.
- Press the Shutter button to take a photo. The flashlight will flash, and a shutter sound will confirm the photo has been taken.
- Keep the camera steady while taking photos.
- The upper right corner of the screen displays the remaining number of photos that can be taken.
Filters and Frames
The Kodak Charmera offers a variety of built-in frames and filters to enhance your photos with a nostalgic touch. These include vintage film borders, classic Kodak logos, pixel filters, and tone filters.

Image: A visual guide to the various frames and filters, such as Painter, Negative Film, Kodak, 1987, B&W, Cool Tone, Warm Tone, and Pixel filters.

Image: Demonstrations of Pixel Filters in Yellow, Red, Blue, and Gray, showing their effect on images.

Image: Examples of Black & White, Warm Tone, and Cool Tone filters applied to different scenes.
5.3. Recording Videos
- Press the On/Off button and select the video icon (usually in the middle of the screen). Press the Play/OK button to enter video mode.
- Press the Shutter button to start recording. Press the Shutter button again to stop recording.
- The video will automatically save to the memory card, and the device will return to video mode.
5.4. File Playback
- In photo or video mode, press the Play/OK button to enter file playback mode.
- Use the Up or Down buttons to navigate through your saved files.
- For video files, press the Shutter button to play or pause. While a video is paused, you cannot browse other files.
- Press the On/Off button to return to file playback mode.

Image: The camera's screen displaying a captured image during file playback.
5.5. Setting Date & Time
- Press the On/Off button and select the calendar icon (usually on the right-hand side). Press the Play/OK button to enter the setting.
- Go to