1. Introduction
Thank you for choosing the Electric Neck Massager Cervical Pillow. This device is designed to provide deep relaxation and support for your neck and shoulders through a combination of heating, vibration massage, and ergonomic design. Please read this manual carefully before use to ensure safe and effective operation.

Image 1: Overview of the Electric Neck Massager Cervical Pillow, highlighting heating, vibration, and adjustable traction.
2. Safety Precautions
- Do not use the device if you have any medical conditions such as heart disease, pacemakers, or are pregnant, without consulting a doctor.
- Keep the device away from water and moisture. Do not use it in wet environments.
- Do not disassemble or attempt to repair the device yourself. Contact customer support for assistance.
- Keep out of reach of children.
- Unplug the device when not in use or before cleaning.
- Do not use the device for prolonged periods in one area to avoid overheating or discomfort.
3. Setup
- Unpack: Carefully remove the neck massager from its packaging.
- Inspect: Check the device for any visible damage. If damaged, do not use and contact customer support.
- Positioning: Place the cervical pillow on a flat, comfortable surface such as a bed or sofa. Position your head and neck comfortably on the pillow, ensuring the massage nodes align with your neck and shoulder areas. The ergonomic design is intended to fit the natural curves of your head, shoulders, and neck.
- Power Connection: Locate the plug-in port on the device. Connect the provided power adapter to the device and then plug it into a suitable power outlet. Ensure the connection is secure.

Image 2: Neck support design illustrating the ergonomic fit for cervical spine alignment.
4. Operating Instructions
The neck massager features independent controls for heating and vibration functions, each with multiple intensity levels.

Image 3: Control panel for heating and vibration functions.
- Power On/Off:
- Heating Function: Long press the button with the flame icon (
) to turn the heating function on or off. - Vibration Function: Long press the button with the wave icon (
) to turn the vibration function on or off.
- Heating Function: Long press the button with the flame icon (
- Adjusting Intensity Levels:
- Heating Levels: While the heating function is on, short press the flame icon button to cycle through the three levels:
- Red: High-Level Heat
- Green: Mid-Level Heat
- Blue: Low-Level Heat
- Vibration Levels: While the vibration function is on, short press the wave icon button to cycle through the three levels:
- Red: High-Level Vibration
- Green: Mid-Level Vibration
- Blue: Low-Level Vibration
- Heating Levels: While the heating function is on, short press the flame icon button to cycle through the three levels:
- Traction/Lifting: The pillow may feature an electric lifting mechanism for adjustable traction. If available, controls for this function will be integrated into the main control panel or a separate switch. Refer to specific model details for operation.
- Usage Duration: It is recommended to use the massager for sessions of 15-30 minutes. Avoid continuous use for extended periods.

Image 4: Alternative control layout (Model A) for hot compress and shock functions.
5. Maintenance
- Cleaning: The main body of the massager cannot be washed directly. To clean, unplug the device and wipe the surface with a soft, slightly damp cloth. Do not use abrasive cleaners or solvents.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Care: Avoid sharp objects that could puncture or damage the pillow material.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Not properly plugged in; power outlet issue. | Ensure power adapter is securely connected to the device and a working power outlet. |
| Heating function not working. | Heating function not activated or set to lowest level. | Long press the flame icon button to activate. Short press to cycle through heat levels. |
| Vibration function not working. | Vibration function not activated or set to lowest level. | Long press the wave icon button to activate. Short press to cycle through vibration levels. |
| Device feels too hot/cold. | Heat level set too high/low. | Adjust the heating level to a comfortable setting. Discontinue use if discomfort persists. |
7. Specifications

Image 5: Detailed product specifications and dimensions.
| Product Name: | Cervical Pillow Massager |
| Functions: | Traction, Hot Compress, Vibration Massage, Electric Lifting |
| Switch Gears: | Low, Medium, High (for both heat and vibration) |
| Material: | Composite Material, Slow Rebound Memory Foam |
| Application Area: | Neck, Shoulders |
| Usage Scenario: | Home, Outdoor |
| Certification: | CE |
| Dimensions (Approx.): | Length: 41 cm, Width (headrest): 23 cm, Height (headrest): 15 cm, Total Height: 27.8 cm |
| Power Supply: | Plug-in (Adapter included) |
8. User Tips
- Start with the lowest heat and vibration settings and gradually increase to find your most comfortable level.
- Use the massager while relaxing in a reclined position for optimal neck support and comfort.
- Ensure your neck is fully supported by the pillow's contours for effective massage and traction.
9. Warranty & Support
For warranty information, technical support, or service inquiries, please refer to your purchase documentation or contact the seller directly. Keep your proof of purchase for any warranty claims.