1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your new Mini Luminous Car Clock. Designed for convenience and readability, this compact clock can be easily mounted on your car's dashboard or air vent, providing accurate time with a luminous display for night visibility.
2. Safety Information
Please read and understand all safety information before using the product.
- Do not overload the mounting mechanism; ensure the clock is securely fastened.
- Observe safe operating procedures, especially when installing or adjusting the clock while the vehicle is in motion.
- Avoid dropping the clock to prevent damage.
- Keep out of reach of children.
3. Product Features
- Easy to install with adhesive backing or air vent clip.
- Compact size for space-saving placement.
- Luminous function for clear time visibility at night.
- Durable and aesthetic design.
- Accurate quartz movement.
4. Specifications
| Attribute | Detail |
|---|---|
| Material | Steel Casing, Sapphire Glass |
| Type | Car Clock |
| Diameter | 4 cm (1.57 in) / 40 mm |
| Thickness | 8 mm (0.31 in) |
| Weight | 0.035 kg |
| Origin | Mainland China |
5. Setup and Installation
The car clock offers two primary installation methods: adhesive mounting or air vent clip attachment.
5.1 Adhesive Mounting
- Choose a clean, flat surface on your dashboard or desired location.
- Ensure the surface is free from dust, grease, and moisture.
- Peel off the protective film from the double-sided adhesive tape located on the back of the clock.
- Firmly press the clock onto the chosen surface for a few seconds to ensure a secure bond.
5.2 Air Vent Clip Installation
- Locate a suitable air vent in your vehicle.
- Attach the provided air vent clip to the back of the clock.
- Gently slide the clip into the air vent slat until it is securely in place.
6. Operation
6.1 Setting the Time
- Gently pull out the small button located on the side of the clock casing.
- Rotate the button to adjust the hour and minute hands to the correct time.
- Once the time is set, push the button back in to start the clock mechanism.
6.2 Luminous Function
The clock features a luminous display, allowing you to easily view the time even in low-light conditions or during night driving. The hands and hour markers are designed to glow after exposure to light.
7. Maintenance
- Clean the clock's surface with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
- Ensure the clock is not exposed to extreme temperatures or direct sunlight for prolonged periods, as this may affect its performance or appearance.
- If the clock stops functioning, the battery may need replacement. Consult a professional for battery replacement to avoid damaging the sapphire glass or internal mechanism.
8. Troubleshooting
8.1 Clock Not Functioning
- Ensure the time-setting button is fully pushed in.
- The battery may be depleted. Consider professional battery replacement.
- If the issue persists, please contact after-sales service for further assistance.
9. User Tips
- For optimal luminous effect, expose the clock face to bright light before night driving.
- When using the adhesive mount, allow sufficient time for the adhesive to cure (e.g., 24 hours) before driving, especially in varying temperatures.
- Periodically check the security of the air vent clip to ensure it remains firmly attached.
10. Warranty and Support
For detailed warranty information and support, please refer to the official user manual PDF available from the seller or contact AutoFinesse Store directly. The seller provides after-sales service for product-related inquiries and issues.
You can access the full user manual in PDF format here: User Manual (PDF)