RACBOX Variable Valve Timing Control Solenoid

Contents

Instruction Manual: Variable Valve Vanos Timing Solenoid

Model: Variable Valve Timing Control Solenoid (OEM/Part No. 11368610388, 11367604292, 1922V9)

Brand: RACBOX

1. Introduction

This manual provides essential information for the safe and effective installation, operation, and maintenance of your new Variable Valve Vanos Timing Solenoid. This product is an auxiliary accessory designed for the normal replacement and upgrade of original car components. It meets relevant national automotive lighting industry standards and has undergone strict quality testing.

Please read all instructions carefully before use to ensure proper function and to prevent damage or injury.

2. Safety & Warnings

Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.

3. Specifications

Product Details
AttributeValue
Product NameVariable Valve Timing Control Solenoid
Model NumberVariable Valve Timing Control Solenoid
OEM NO. / Part Number11368610388, 11367604292, 1922V9
Terminal Quantity2-pin
OriginMainland China
High-concerned chemicalNone
Package Weight0.42 kg
Package Dimensions (L x W x H)14 cm x 6 cm x 6 cm

Dimensions

Diagram showing solenoid dimensions: 117mm length, 46mm width, 18mm top diameter.
Figure 1: Solenoid dimensions. Overall length is 117mm, width at base is 46mm, and top diameter is 18mm.

Fitment Information

This Variable Valve Vanos Timing Solenoid is compatible with the following vehicle models:

  • For Mini:
    • Clubman R55 (2007-2014) - All 1.4 & 1.6 Petrol models
    • Hatch R56 (2006-2013) - All 1.4 & 1.6 Petrol models
    • Convertible R57 (2008-2015) - All 1.6 Petrol models
    • Coupe R58 (2010-2015) - All 1.6 Petrol models
    • Roadster R59 (2011-2015) - All 1.6 Petrol models
    • Countryman R60 (2010-2016) - All 1.6 Petrol models
    • Paceman R61 (2012-2016) - All 1.6 Petrol models
  • For BMW:
    • 1 Series F20 & F21 (2011-2016) - All 1.6 Petrol N13 models
    • 3 Series F30, F31 & F80 (2012-2016) - All 1.6 Petrol N13 models
  • For Citroen:
    • Berlingo (2009 onwards) - 1.6 Petrol EP6 engine
    • C3 (2009 onwards) - 1.4 Petrol EP3 & 1.6 Petrol EP6 engines
    • C4 (2008 onwards) - 1.6 Petrol EP6 engine
    • C5 (2009 onwards) - 1.6 Petrol EP6 engine
    • DS3 (2010-2015) - 1.6 Petrol EP6 engine
    • DS4 (2011-2015) - 1.6 Petrol EP6 engine
    • DS5 (2011-2015) - 1.6 Petrol EP6 engine
    • C4 Spacetourer (2018 onwards) - 1.6 Petrol EP6 engine
  • For DS:
    • DS 3 (2015-2019) - 1.6 Petrol EP6 engine
    • DS 4 (2015 onwards) - 1.6 Petrol EP6 engine
    • DS 5 (2015-2018) - 1.6 Petrol EP6 engine
    • DS 7 (2018 onwards) - 1.6 Petrol EP6 engine
  • For Vauxhall/Opel:
    • Grandland (2018 onwards) - 1.6 Petrol Turbo A16, D16 & F16 engine
  • For Peugeot:
    • 2008 (2013 onwards) - 1.6 Petrol EP6 engine
    • 207 (2007-2013) - 1.4 Petrol EP3 & 1.6 Petrol EP6 engines
    • 208 (2012 onwards) - 1.4 Petrol EP3 & 1.6 Petrol EP6 engines
    • 3008 (2009 onwards) - 1.4 Petrol EP3 & 1.6 Petrol EP6 engines
    • 308 (2009 onwards) - 1.4 Petrol EP3 & 1.6 Petrol EP6 engines
    • 508 (2009 onwards) - 1.4 Petrol EP3 & 1.6 Petrol EP6 engines
    • Partner (2010 onwards) - 1.6 Petrol EP6 engine
    • RCZ (2010-2015) - 1.6 Petrol EP6 engine

Attention: The model list is for reference only. It is highly recommended to compare the appearance and plug of your original car part with the product images and specifications before purchase to ensure compatibility.

4. Setup & Installation

Follow these steps for proper installation of the Variable Valve Timing Control Solenoid:

  1. Preparation: Turn off the vehicle engine and disconnect the power supply to avoid short circuits.
  2. Locate Original Part: Identify the mounting position of the original Solenoid Valve.
  3. Remove Old Solenoid: Remove any fixing screws or plugs that secure the old Solenoid Valve.
  4. Disconnect: Unplug the power connector from the original Solenoid Valve and carefully remove it.
  5. Install New Solenoid: Install the new Solenoid Valve into the designated mounting position.
  6. Secure Solenoid: Secure the new Solenoid Valve with screws or clips to ensure stable installation.
  7. Connect Power: Connect the power plug correctly. If the Solenoid Valve does not work after connection, check if the terminals are loose, focusing on ensuring the locking buckle of the connector is in place.
Image showing two Variable Valve Vanos Timing Solenoids in front of a blue Mini Cooper, with a close-up inset of the 2-pin connector.
Figure 2: The Variable Valve Vanos Timing Solenoid and its 2-pin connector.
Close-up image of the Variable Valve Vanos Timing Solenoid installed in an engine bay, showing its position relative to other engine components.
Figure 3: Example of solenoid installation in a vehicle.
Detailed view of the 2-pin electrical connector on the solenoid, highlighting the connection points.
Figure 4: Detail of the 2-pin power connector.
Close-up of the solenoid's filter mesh and green O-ring, designed to prevent debris and ensure a proper seal.
Figure 5: Solenoid filter and O-ring detail.

5. Operating Instructions

After successful installation, perform the following steps:

  1. Function Test: Test the Solenoid Valve functions to ensure normal operation of the vehicle's variable valve timing system.
  2. Final Check: Recheck all screws and connections to make sure they are firm and reliable before operating the vehicle.

The Variable Valve Timing Control Solenoid operates automatically as part of your vehicle's engine management system to optimize valve timing for improved performance and fuel efficiency.

6. Maintenance

To ensure the longevity and optimal performance of your Variable Valve Timing Control Solenoid:

  • Regular Inspection: Periodically inspect the solenoid and its connections for any signs of wear, damage, or looseness.
  • Cleanliness: Keep the area around the solenoid clean and free from excessive dirt or debris.
  • Professional Check: If you notice any unusual engine behavior or warning lights related to valve timing, consult a qualified mechanic for diagnosis and service.

7. Troubleshooting

Solenoid Valve Does Not Work After Installation

  • Check Connections: Ensure the power plug is connected correctly and securely. Pay close attention to the locking buckle of the connector to confirm it is fully engaged and the terminals are not loose.
  • Inspect for Damage: Verify that the solenoid itself or its wiring harness has not been damaged during installation.
  • Professional Diagnosis: If the issue persists after checking connections, it is recommended to have the vehicle diagnosed by a professional mechanic.

8. User Tips

No specific user tips were available from customer reviews or Q&A for this product. However, general advice for automotive parts includes:

  • Always ensure the engine is cool before attempting any work on engine components.
  • Use appropriate tools for removal and installation to prevent damage to the part or surrounding components.
  • Double-check all connections and fasteners before starting the engine after any repair or replacement.

9. Warranty & Support

For any questions or support regarding this product, please contact the seller, RACBOX LED Light Store, directly through their official store page.

A comprehensive user manual in PDF format is available for download. This document contains additional details and diagrams that may be helpful for installation and troubleshooting. You can access it via the following link: Download User Manual (PDF).

Manufacturer Information:
Guangzhou Bai Ji Tun Trading Co., Ltd, C116, No.1489, Fanghua Road Baiyun Guangzhou, tdlaccount@126.com

EU Authorized Representative:
APEX CE SPECIALISTS LIMITED, UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD, CORK, T23 AT2P, IRELAND, info@apex-ce.com

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.