RACBOX LED Fog Light Lamp

Contents

RACBOX White LED Fog Light Lamp User Manual

Model: Fog Lights Assembly

RACBOX White LED Fog Light Lamp pair, close-up and installed on a vehicle

Image: RACBOX White LED Fog Light Lamp pair, showing the front and rear views, and the lights illuminated on a vehicle.

1. Product Information

  • Product Name: Fog Lights Assembly
  • Model: Fog Lights Assembly
  • Batch/Serial Number: 010-03
  • Manufacturer: Guangzhou Bai Ji Tun Trading Co., Ltd, C116, No.1489, Fanghua Road Baiyun Guangzhou
  • EU Authorized Representative: APEX CE SPECIALISTS LIMITED, UNIT 3D NORTH POINT HOUSE, NORTH POINT BUSINESS PARK, NEW MALLOW ROAD, CORK, T23 AT2P, IRELAND

Compliance Information

This product is an auxiliary accessory for automotive lighting, intended for normal replacement and upgrade of original car lights. It is not for illegal modification or use. The products meet relevant national automotive lighting industry standards and have undergone strict quality testing, ensuring they are qualified for use.

2. Safety & Warnings

Important Safety Information:

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.

3. Setup Instructions

Follow these steps for proper installation of your new fog light assembly:

  1. Prepare Vehicle: Turn off the vehicle engine and disconnect the power supply to avoid short circuits.
  2. Locate Original Fog Light: Identify the mounting position of the original fog light.
  3. Remove Old Assembly: Remove the fixing screws or clips that hold the stock light assembly in place.
  4. Disconnect: Unplug the power connector and carefully remove the original fog light.
  5. Install New Assembly: Install the new fog light assembly into the designated mounting position.
  6. Secure Light: Secure the light assembly with screws or clips to ensure stable installation.
  7. Connect Power: Connect the power plug correctly. If the light does not work after connection, reverse the plug polarity.
  8. Test Functionality: Test all light functions to ensure normal operation.
  9. Final Check: Recheck all screws and connections to make sure they are firm and reliable.
Rear view of RACBOX LED Fog Light showing heatsink and connector

Image: Rear view of the RACBOX LED Fog Light, highlighting the heatsink and electrical connector for installation reference.

4. Operating Instructions

Once installed, the RACBOX White LED Fog Light Lamp operates as a direct replacement for your vehicle's original fog lights. They will activate and deactivate according to your vehicle's fog light controls.

5. Maintenance

  • Cleaning: Periodically clean the lens of the fog lights with a soft, damp cloth to remove dirt and debris that may obstruct light output. Avoid abrasive cleaners.
  • Connection Check: Occasionally inspect the electrical connections to ensure they remain secure and free from corrosion.
  • Physical Inspection: Check for any physical damage to the housing or lens. Replace the unit if significant damage is observed.

6. Troubleshooting

  • Light Not Working:
    • Ensure the power plug is securely connected.
    • If connected, try reversing the polarity of the power plug.
    • Check your vehicle's fuse box for any blown fuses related to the fog lights.
  • Light Appears Loose:
    • Re-tighten all mounting screws or clips securing the fog light assembly.

7. Specifications

FeatureDetail
Brand NameRACBOX
Item TypeFog Lamp Assembly
Voltage12 V
MaterialPlastic+aluminium
Light ColorWhite
OEM NO. / Aftermarket Replace Number81210-48050, 81220-48050, 8121048050, 8122048050
Dimensions (Approx.)Width: 104-106mm, Mounting Tab Height: 39mm
Diagram showing dimensions of the RACBOX LED Fog Light

Image: Diagram illustrating the dimensions of the fog light assembly (104mm top width, 106mm bottom width, 39mm mounting tab height).

Fitment Compatibility

This fog light assembly is compatible with a wide range of vehicles, including but not limited to:

  • For Lexus CT200h 2011-up
  • For Lexus ES300h ES350 2013-2014
  • For Lexus GS350 GS460 GS450h 2011-2015
  • For Lexus HS250h 2010-2012
  • For Lexus IS250 IS350 (excluding IS-F or F-Sport package) 2014-2015
  • For Lexus IS-F (or Lexus IS250 IS350 with F-Sport package) 2008-2013
  • For Lexus LX570 2008-2014
  • For Lexus RX350 RX450h 2010-2014
  • For Scion tC 2014-2016
  • For Scion xA 2006
  • For Scion xB 2011-2015
  • For Toyota Avalon 2008-2010
  • For Toyota Camry 2007-2013
  • For Toyota Corolla 2009-2015
  • For Toyota Highlander Hybrid 2008-2010
  • For Toyota Highlander 2014-2016
  • For Toyota Matrix 2008-2013
  • For Toyota Prius 2010-2012
  • For Toyota RAV4 2006-2012
  • For Toyota Solara 2007-2008
  • For Toyota Tacoma 2012-2016
  • For Toyota Tundra 2014-2016
  • For Toyota Venza 2009-2012
  • For Toyota Yaris 2006-2014
  • For Toyota Sienna 2011-2014

8. User Tips

  • Compatibility Check: Always verify compatibility with your vehicle's specific make, model, and year before purchasing and attempting installation. Refer to the OEM part numbers provided.
  • Professional Installation: If you are unsure about the installation process, it is recommended to seek assistance from a qualified automotive technician.
  • Polarity Test: If the light does not illuminate after initial connection, remember to reverse the plug polarity as a first troubleshooting step.

9. Warranty & Support

For warranty information, technical support, or any inquiries regarding your RACBOX White LED Fog Light Lamp, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.