1. Safety Precautions
1. This product is for indoor and corridor use only. Keep the battery away from fire, overheating, and direct sunlight. Do not place it on or inside heating devices. Do not disassemble, modify, throw, or squeeze it. Do not insert foreign objects, immerse it in liquids, or expose it to external force or pressure, as this may cause leakage, overheating, fire, or even explosion. Do not attempt to replace the battery yourself, as this may damage the battery, leading to overheating, fire, and injury.
2. Use a 5V/1A standard USB charging adapter when charging. Do not use a high-voltage fast charging adapter to prevent battery damage. Keep away from children during charging.
2. Product List / Package Contents
Upon unpacking, please check that all accessories are included (for a single unit):
- No-wiring wall lamp pole x 1
- Lampshade x 1
- Rechargeable bulb x 1
- USB charging cable x 1
- Instruction manual x 1
- Remote control x 1

Figure 2.1: Wall Light Components
3. Setup Instructions
3.1. Assembly
The wall light requires minimal assembly. Follow these steps:
- Carefully unpackage all components.
- Attach the lampshade to the bulb holder by screwing it on gently until secure.
- Insert the rechargeable bulb into the E27 base of the lamp.
- Ensure the bulb is securely seated.

Figure 3.1: Assembly Overview
3.2. Installation
This wall light is designed for easy, no-wiring installation. It features magnetic installation for convenience.
- Choose a suitable indoor location on a wall, such as a living room, bedroom, hallway, or entryway.
- Ensure the wall surface is clean and dry.
- The light base can be mounted to the wall using appropriate screws (not included) or strong adhesive if preferred. For magnetic installation, ensure a compatible magnetic surface or attach a metal plate (not included) to the wall first.
- Once the base is securely mounted, the light fixture can be magnetically attached to it.

Figure 3.2: Magnetic Installation Feature
3.3. Charging and Power Level Indication
- Charging Operation: Remove the bulb from the fixture. Insert one end of the USB charging cable into the bulb's Type-C charging port, and connect the other end to a standard 5V/1A USB charger or computer USB port.
- Battery Level Indicator: The indicator light on the bulb will be red while charging; it turns green when fully charged, at which point the power can be disconnected.
- Initial Charge: Due to long-distance transportation, the bulb you receive may only have partial or no charge. It is recommended to charge it for 2-3 hours using the USB charging cable to ensure the bulb reaches its full brightness and provides long-lasting power.
Video 3.1: Demonstrates bulb charging and remote control operation.
4. Operating Instructions
The wall light is operated using the included remote control. Ensure the remote control has 1.5V AAA batteries installed (not included) and remove any transparent insulating sheet from the battery compartment before first use.
4.1. Remote Control Functions (RGB Version)

Figure 4.1: Remote Control Layout (RGB Version)
- OFF: Turn off lights
- ON: Turn on lights
- Brightness Up (+): Increase brightness
- Brightness Down (-): Decrease brightness
- FLASH: Light flashing color change mode
- White Light/Warm Light/Neutral Light: Cycle through white, warm, and neutral light temperatures.
- SMOOTH: Light gradient mode (smooth color transitions)
- RGB Colors: Direct selection of 12 RGB colors.
- Timer (30MIN, 1H, 2H): Set a timer for the light to turn off automatically after 30 minutes, 1 hour, or 2 hours.

Figure 4.2: Color Temperatures and Stepless Dimming

Figure 4.3: RGB Color Modes

Figure 4.4: Remote Control Timer and Memory Functions
4.2. Remote Control Functions (Three Colors Available)
This section describes the remote control for models that only offer three color temperatures (warm, neutral, cool) without RGB functionality. If your model includes RGB, refer to section 4.1.
- ON/OFF: Turn the light on or off.
- White Light: Activates cool white light.
- Warm Light: Activates warm light.
- Neutral Light: Activates neutral light.
- Brightness Up (+): Increase brightness.
- Brightness Down (-): Decrease brightness.
- Timer (15, 30, 60): Set a timer for the light to turn off automatically after 15, 30, or 60 minutes.
5. Maintenance
5.1. Cleaning
To clean the wall light, ensure it is turned off and the bulb is removed. Wipe the surface of the fixture and lampshade with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
5.2. Battery Care
To prolong the life of the rechargeable battery:
- Avoid fully discharging the battery frequently.
- Charge the bulb regularly, even if not in constant use, to maintain battery health.
- Store the bulb in a cool, dry place if it will not be used for an extended period.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | Battery is discharged. Bulb not properly seated. Remote control batteries are dead. | Charge the bulb for 2-3 hours. Re-insert the bulb firmly into the base. Replace remote control batteries (1.5V AAA). |
| Remote control not working | Remote control batteries are dead or incorrectly inserted. Insulating sheet not removed. | Replace batteries, ensuring correct polarity. Remove the transparent insulating sheet from the battery compartment. |
| Light is dim or flickers | Low battery. | Charge the bulb fully. |
7. Specifications

Figure 7.1: Product Dimensions and Materials
| Feature | Detail |
|---|---|
| Model Number | Xmx-60W |
| Luminous Flux | 249-2000 Lumens |
| Installation Method | Assembly, Wall Mounted |
| Lighting Area | 10-15 square meters |
| Material | Metal (Iron Body), Plastic (Shade Type) |
| Base Type | E27 |
| Power Source | Rechargeable battery (2000mAh) |
| Is Bulbs Included | Yes (LED bulbs) |
| Is Dimmable | Yes (0-100% stepless dimming) |
| Switch Type | Remote Control, Touch On/Off Switch (on bulb) |
| Voltage | ≤36V |
| Run Time | 20-80 hours (depending on brightness) |
| Color Temperatures | 3000K Warm, 6000K Cool, RGB Colors |
| Certification | CE, EMC, ROHS |
8. User Tips
- The included bulb uses an E27 base, making it adaptable with other E27 bulbs if you wish to change it, provided they are also rechargeable and compatible with the fixture's power requirements.
- While the lampshade is acrylic, the main body of the fixture is metal, providing a sturdy build.
- For optimal performance, ensure the bulb is fully charged before its first use and after extended periods of non-use.
9. Warranty and Support
For warranty information and customer support, please refer to the seller's terms of service or contact the point of purchase. Keep your proof of purchase for any warranty claims.