1. Introduction
This manual provides essential information for the safe and efficient use of your Human Infrared Sensor Outdoor Wall Lamp. This motion-activated sensor automatically controls lighting, enhancing energy efficiency and providing convenient illumination for various outdoor settings.

2. Safety Information
- Electrical Safety: Always ensure the power supply is disconnected before attempting any installation, maintenance, or repair to prevent electric shock.
- No Disassembly: Do not attempt to disassemble the device yourself. This may expose internal components, cause injury, and void any potential warranty.
- Intended Use: This product is designed exclusively for outdoor use. Avoid installing it in enclosed or damp indoor areas, as moisture accumulation can lead to short circuits or malfunction.
3. Package Contents
Please check the package for the following items:
- 1 x Human Infrared Sensor Wall Light
4. Specifications
| Feature | Specification |
|---|---|
| Dimensions | 15.5 x 5.8 x 4.5 CM (6.1 x 2.28 x 1.77 Inches) |
| Weight | 96 g |
| Material | Premium ABS |
| Color | Black |
| Origin | China |
| Operating Temperature | -10°C to 40°C |
| Input Voltage | DC24V |
| Sensing Distance | Max 12m (at 25°C) |
| Induction Angle | 180° (adjustable) |
| Delay Time | 5 seconds - 6 minutes (adjustable) |
| Installation Height | 1.8m ~ 2.5m |
| Ambient Light Sensitivity | 2 ~ 2000LUX (adjustable) |

5. Setup and Installation
5.1 Installation Environment
- Location Selection: Choose a location that is free from obstructions such as trees, walls, or large objects that could block the sensor's view and ensure unobstructed motion detection.
- Avoid Interference: Do not install the sensor in areas exposed to direct sunlight or near heat sources (e.g., vents, outdoor units of air conditioners). These can interfere with sensor performance and cause false triggers.
- Optimal Height: Install the sensor at a height between 1.8m and 2.5m for optimal detection range and accuracy.

6. Operating Instructions
6.1 Motion-Activated Lighting Control
The sensor automatically turns on connected lights when motion is detected within its 180° detection angle and up to 12 meters range. Lights will switch off after a preset delay, enhancing energy efficiency and providing convenient illumination.
6.2 Sensor Adjustment
Prior to use, adjust the following settings on the sensor to optimize detection accuracy and prevent false triggers:
- Induction Angle: Adjust the physical orientation of the sensor head to cover the desired detection area.
- Ambient Light Sensitivity (LUX): Set the LUX dial to determine at what ambient light level the sensor will activate. For example, set to a lower LUX value for activation only in darker conditions, or a higher value for activation in brighter conditions. (Adjustable from 2 to 2000LUX).
- Delay Time: Set the TIME dial to specify how long the light stays on after motion is no longer detected. (Adjustable from 5 seconds to 6 minutes).

7. Maintenance
7.1 Regular Cleaning
Gently wipe the sensor surface with a soft, dry cloth to remove any dust or debris. This helps maintain optimal detection sensitivity. Avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the device's surface and internal components.
7.2 Storage and Inspection
If the sensor will not be used for an extended period, store it in a dry, cool place away from direct sunlight and extreme temperatures. Periodically check the mounting screws and wiring connections to ensure they remain secure and functional.
8. Troubleshooting (FAQs)
Q1: Why does the sensor fail to detect motion sometimes?
A: Possible reasons include:
- Obstructions: Objects blocking the sensor's view. Ensure the sensor is installed in an unobstructed area.
- Incorrect Ambient Light Settings: If the ambient light sensitivity (LUX) is set too high, the sensor might remain off during bright conditions. Adjust the LUX setting as needed.
- Motion Outside Detection Angle: Motion occurring outside the sensor's 180° detection angle or beyond its 12m range. Adjust the sensor's physical angle and sensitivity.
Q2: How to optimize the sensor's performance in different weather conditions?
A:
- Rainy or Foggy Weather: Ensure the sensor surface is clean to maintain detection accuracy.
- Water Exposure: Avoid installing the sensor in areas prone to direct water splashing.
- Extreme Conditions: While the ABS material provides basic weather resistance, extreme conditions (e.g., heavy snow, prolonged freezing temperatures) may require additional protection (e.g., a protective cover) to prolong service life.
9. User Tips
To maximize the effectiveness and lifespan of your motion sensor light:
- Experiment with the LUX and TIME settings during different times of day and night to find the optimal configuration for your specific needs and environment.
- Regularly check for spiderwebs or debris on the sensor lens, as these can significantly impair detection.
10. Warranty and Support
For warranty information or technical support, please refer to the seller's policies or contact their customer service directly. Keep your purchase receipt as proof of purchase.