1. Introduction
Thank you for choosing the Baofeng BF-T18 PMR446 Walkie Talkie. This portable transceiver is designed for license-free use in most European countries, making it an ideal communication solution for both professionals and leisure users.
The BF-T18 is a multi-task PMR446 transceiver that combines advanced radio communication technology with a sturdy mechanical frame. It is suitable for various environments, including construction sites, buildings, events, and outdoor activities.
PMR446 Frequencies: This device operates on the PMR446 frequency band (446.00625-446.09375MHz), which is license-exempt within the European Union. Applicable countries include Spain, France, Italy, Poland, Russia, Netherlands, Ukraine, Belarus, England, Germany, and other European countries.

Image: PMR446 Transceiver with a map highlighting European countries where the device can be used license-free.
2. Package Contents
Please check the package carefully to ensure all items are present:
- Radio Unit(s)
- Li-ion Battery(ies)
- Belt Clip(s)
- Sling(s)
- Y-type USB-C Cable(s)
- User Manual(s)
- Box(es)
The quantity of items (e.g., 2PCS or 4PCS) depends on the specific package option purchased.

Image: Visual representation of package contents for both 2-piece and 4-piece options, including radios, batteries, belt clips, slings, USB-C cables, manuals, and boxes.
3. Product Overview and Controls
Familiarize yourself with the main controls and parts of your BF-T18 walkie talkie:

Image: Detailed diagram showing the front, side, and back views of the BF-T18 walkie talkie with numbered annotations for each function button and port.
- Antenna: For transmitting and receiving signals.
- Flashlight: Provides illumination.
- Power/Volume Switch: Turn clockwise to power on and increase volume; turn counter-clockwise to decrease volume and power off.
- LED Indicator: Red for Transmit (TX), Green for Receive (RX).
- PTT Key (Push-to-Talk): Press to transmit, release to receive.
- Down Key: Short press to select channels downwards. Long press to lock/unlock function keys.
- Built-in Microphone: For voice input.
- LED Digital Display: Shows channel number and status.
- External Speaker/Microphone Jack: For connecting external audio accessories.
- Up Key: Short press to select channels upwards. Long press to enter monitoring state.
- LAMP Key: Short press to turn the flashlight on/off.
- Speaker: For audio output.
- Battery Release Latch: To remove the battery.
- Belt Clip: For attaching the radio to clothing or a belt.
- Type-C Charging Port: DC5V USB input for charging.
- Charging Indicator: Red light indicates charging, green light indicates fully charged.
4. Setup
4.1. Battery Installation
Align the battery pack with the battery compartment on the back of the radio. Gently push the battery into place until it clicks securely. To remove, press the battery release latch (13) and slide the battery out.
4.2. Charging the Battery
The BF-T18 is equipped with a 3.7V Li-ion rechargeable battery pack and supports convenient USB Type-C charging. The charging indicator (16) will show red during charging and turn green when fully charged.
- Connect the USB-C cable to the charging port (15) on the radio.
- Connect the other end of the USB-C cable to a compatible USB power source (e.g., wall adapter, power bank, car charger, computer USB port).
- A full charge typically takes 4-5 hours.
- For optimal battery life, it is recommended to charge the battery pack when the radio is off and the battery is fully discharged.

Image: Close-up of the BF-T18 showing the USB Type-C port and the charging indicator light, which is green when fully charged and red when charging.

Image: Illustrations demonstrating different ways to charge the BF-T18 using its USB Type-C port, including wall adapters, power banks, car chargers, and laptops.
Caution: Using a different battery charger other than the one specified can cause damage to your device or may even cause explosions and personal injuries.
5. Operating Instructions
5.1. Turning Your Radio On and Off
- To turn ON: Turn the Power/Volume switch (3) clockwise.
- To turn OFF: Turn the Power/Volume switch (3) counter-clockwise.
5.2. Setting the Volume
- To increase volume: Turn the Power/Volume switch (3) clockwise.
- To decrease volume: Turn the Power/Volume switch (3) counter-clockwise.
Warning: Do not hold the radio close to your ear if the volume is set to an uncomfortable level, as it could cause hearing damage.
5.3. Talking and Listening
All radios in your group must be set to the same channel and Sub-Code to communicate.
- Hold your radio approximately 2-3 cm from your mouth.
- Press and hold the PTT key (5) while speaking. The Transmit (TX) icon will appear on the LED display.
- Release the PTT key (5) to receive incoming calls. The Receive (RX) icon will appear on the LED display.
- For maximum clarity, avoid covering the microphone (7) while talking.
5.4. Channel Selection
In standby mode, use the Up key (10) or Down key (6) to select the desired channel. Press and hold these keys to quickly switch channels. The selected channel number will be shown on the LED digital display (8). If voice prompt is enabled, the channel number will be broadcast.
5.5. Monitor Function
Press and hold the Up key (10) for 2 seconds to enter Monitor mode. This allows you to listen for weak signals on the current channel and adjust the volume even when not receiving a signal.
5.6. Scan Function
This function must be activated via programming software. To use scan, all 16 channels must be programmed. When the radio is on, press and hold both the Up key (10) and Down key (6) simultaneously to start scanning. The scan will stop on any busy channel. Pressing PTT (5) while scanning will transmit on the last busy channel. Press any function key to exit scanning.
5.7. Flashlight Function
With the radio turned on, short press the LAMP key (11) to turn the flashlight (2) on or off.

Image: A hand holding the BF-T18 walkie talkie with its integrated flashlight turned on, illuminating the surroundings.
5.8. English/Chinese Language Switch
Press and hold the PTT key (5) + Down key (6) simultaneously to switch the voice prompt language between English and Chinese.
5.9. FM Radio
The FM radio function operates within the 88-108MHz frequency range. Press and hold the LAMP key (11) to turn on the FM radio. Use the Up key (10) to automatically search for radio stations. Press the PTT key (5) or turn off the radio to exit FM radio mode.
5.10. Squelch
The Squelch function suppresses background noise on free channels. It has 10 levels (0-9), configurable via programming software. Level 0 turns Squelch off, while higher levels provide more noise reduction. The default Squelch level is 4. Setting it too high may prevent reception of weaker signals, while too low may allow constant noise.
5.11. CTCSS/DCS Tones
CTCSS (Continuous Tone-Coded Squelch System) and DCS (Digitally Coded Squelch) tones act as