1. Introduction
This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Jaxcam 8MP CCTV Camera Security System Kit. Please read this manual thoroughly before using the product to ensure proper and safe operation.
1.1 Product Overview
The Jaxcam CCTV Camera Security System is a comprehensive digital surveillance solution designed for security and defense applications. It features an embedded LINUX operating system for stability, H.265 video compression for high-quality imaging and efficient storage, and TCP/IP network technology for robust remote access. This system can be deployed independently or integrated into a larger security network.
1.2 Main Features
- 8MP Ultra HD Video: Provides clear and detailed visuals for enhanced security.
- Advanced H.265 Video Compression: Reduces file size by 40%-50% compared to H.264, saving storage space and bandwidth.
- 6-in-1 Hybrid Digital Video Recorder (DVR): Supports various camera types for flexible integration.
- AI Human Detection & Face Human Playback: Intelligent features for accurate event detection and review.
- Day & Night Vision: Equipped with IR-Cut filters for clear surveillance footage in all lighting conditions.
- IP66 Weatherproof Cameras: Heavy-duty metal housing designed for outdoor and indoor use in various weather conditions.
- Plug and Play: Easy setup for quick deployment.
- Remote Viewing: Access live streaming and recordings from anywhere via Android, iPhone, iPad, PC, or VMS.
- Motion Detection & Email Alerts: Receive instant notifications upon detecting movement.
- Multi-Language Support: User-friendly interface in multiple languages.
2. Safety Instructions
WARNING: Neglecting any of these warnings may cause death or serious injury.
CAUTION: Neglecting any of these cautions may cause injury or equipment damage.
2.1 Warnings
- Electrical safety regulations of the nation and the region must be strictly followed during installation or use.
- Please use the matched power adapter from a standard company.
- Do not connect multiple DVRs with one single power adapter (overload may lead to over-heat or fire hazard).
- Shut down the power while connecting or dismounting components. Do not operate with power on.
- Shut down the power and unplug the power cable immediately if there is smoke, odor, or noise rising from the DVR. Then contact the dealer or service center.
- Please contact the local dealer or service center if the DVR works abnormally. Do not attempt to disassemble or modify the device yourself. Unauthorized repair or maintenance voids responsibility for problems caused.
2.2 Cautions
- Do not drop anything onto the dome; avoid physical strike. Keep it away from high electromagnetism radiation surroundings. Do not install it on a vibrating surface or places subject to strike (ignorance can cause equipment damage).
- Keep it away from rain and moisture.
- Avoid exposing to direct sunlight, poor ventilation, or heat sources such as heaters or radiators (ignorance can cause fire hazard).
- To avoid physical damage, extreme environments such as lampblack, water vapor, too hot, or dusty conditions are not allowed.
- Please use a soft and dry cloth to clean the shell. Use neutral cleaner instead of alkaline when dirt is difficult to remove.
3. Package Contents
Please check the package contents against the list below. If any items are missing or damaged, please contact your dealer.
- 1 x 8CH H.265 AHD 4K DVR NVR HVR 6-in-1 Digital Video Recorder
- 4 or 8 x HD 8.0MP Indoor/Outdoor IR Night Vision Weatherproof Cameras (quantity depends on kit variant)
- 1 x Power Adapter for DVR
- 1 x USB Mouse for DVR
- 1 x Remote Control for DVR
- Hard Disk (optional, not included in all kits)
- Video cables (not included)

Figure 3.1: Illustration of typical package contents.
4. Setup Instructions
4.1 Hard Disk Drive (HDD) Installation
For initial use, you may need to install a hard disk drive. This DVR unit can accommodate two hard disks (no limited capacity).
- Disassemble the screw: Locate and remove the screws securing the DVR cover.
- Disassemble the cover: Carefully slide or lift off the DVR cover.
- Fix the screw of hard disk: Secure the hard disk(s) into the designated bays using screws.
- Connect the data wire: Attach the SATA data cable from the DVR motherboard to the hard disk.
- Connect the power wire: Attach the SATA power cable from the DVR power supply to the hard disk.
- Cover the machine: Replace the DVR cover.
- Fix the cover: Secure the cover with the screws removed in step 1.
Refer to the visual guide in the user manual PDF for detailed steps.
4.2 Shelf Installation
This product's chassis specification is standard 1U, allowing it to be installed in a standard server rack or shelf.
- Ensure the room temperature is below $35^{\circ}C$ ($95^{\circ}F$).
- Maintain at least 15cm (6 inches) of space around the equipment for proper air circulation.
- Install from the bottom up in the shelf.
- When installing multiple components in the frame, take preventive measures to avoid power socket overload.
4.3 Front Panel Overview
The front panel provides indicators and controls for basic operation. Specific layouts may vary slightly by series (T, A, C, D, E).
Typical Front Panel Elements:
- Power Indicator Light: Indicates the power status.
- Record Indicator Light: Shows when recording is active.
- Alarm Indicator Light: Illuminates when an alarm is triggered.
- Menu Button: Accesses the main menu.
- ESC Button: Exits current menu or operation.
- Direction & Enter Buttons: For navigation and selection within menus.
- IR Remote Receiver: For remote control commands.
- HDD Indicator Light: Indicates hard disk activity.
- USB Port: For connecting USB devices (e.g., mouse, backup drive).
Refer to pages 9-10 of the user manual PDF for detailed diagrams of different series front panels.
4.4 Rear Panel Overview
The rear panel contains all the necessary ports for connecting cameras, monitors, power, and network.
Typical Rear Panel Elements:
- Video Input (BNC): Connects security cameras.
- Video Output (VGA, HDMI): Connects to monitors or displays.
- Audio Input/Output (RCA): For audio recording and playback.
- USB Ports: For mouse, USB drives, etc.
- Network (LAN) Port: Connects to your network router for remote access.
- RS485 Port: For PTZ camera control.
- 12V DC Power Input: Connects the power adapter.
- Alarm Input/Output Terminals: For external alarm devices.
Refer to pages 11-12 of the user manual PDF for detailed diagrams of different series rear panels.
4.5 Audio and Video Input and Output Connections
4.5.1 Video Input Connections
- Video input ports are BNC connectors.
- Input signal demand: PAL/NTSC BNC ($1.0V_{P-P}, 75\Omega$).
- Use high-quality coaxial cables for video transmission.
- Ensure stable and credible connections to avoid interference.
4.5.2 Video Output Connections and Options
- Video output is available via BNC ($1.0V_{P-P}, 75\Omega$) and VGA/HDMI.
- When using a computer display, avoid long periods in the turn-on state and keep it away from electromagnetic interference.
4.5.3 Audio Signal Input/Output
- Audio ports are typically RCA connections.
- Ensure audio signal lines are firm and away from electromagnetic interference.
- For audio output, if howling occurs, try using a better directional microphone, adjusting volume, using sound-absorbing materials, or repositioning speakers/microphones.
4.6 Alarm Input and Output Connections
Before connecting alarm devices, note the following:
4.6.1 Alarm Input
- Alarm input is grounding alarm input, requiring a grounding voltage signal.
- If connecting to multiple DVRs or other equipment, use relays for isolation.
- The grounding of the alarm sensor and the DVR should be shared.
4.6.2 Alarm Output
- Alarm output cannot be connected with high-power loads (no more than 1A).
- Prevent large currents from damaging relays; use contact isolators for high-power loads.
4.6.3 PTZ Decoder Connections
- The grounding of the PTZ decoder and DVR must be shared to prevent PTZ control failure. Shielded twisted pair is recommended.
- Avoid high voltage and take precautions against lightning.
- Connect a 120Ω resistance in parallel at the outlying end to reduce inflection and ensure signal quality.

Figure 4.2: Connection Diagram for HD CCTV DVR System.
5. Operating Instructions
5.1 Basic Operation
5.1.1 Turn On
Plug in the power supply and turn on the power switch. The power indicator light will illuminate, and you will hear a beep after startup. The DVR will typically start in multi-window output mode. If the startup time is within the video setting time, timed recording will begin automatically.
Note:
- Ensure input voltage matches DVR power supply switch ($220V \pm 10\% / 50Hz$).
- Using a UPS is recommended for power protection.
5.1.2 Turn Off
There are two methods: "soft switch" (via main menu > turn off) and "hard switch" (pressing the power supply switch).
- Auto Resume: If the DVR shuts down abnormally, it can automatically backup video and resume previous status.
- Replacing HDD/Battery: Always turn off the power supply switch before replacing the hard disk or battery. Save settings before replacing the battery.
5.1.3 System Login
Upon booting, you will be prompted to log in. Default users are "admin" (super user) and "default" (preview/playback only). Both have no default password. It is highly recommended to change the "admin" password immediately after the first login for security.
Password Protection:
- 3 continuous wrong attempts trigger an alarm.
- 5 continuous wrong attempts lock the account (unlocks after reboot or 30 minutes).
5.1.4 Preview
Right-click the mouse to switch between windows. The system date, time, channel name, surveillance video, and alarm status are displayed in each window.
5.1.5 Desktop Shortcut Menu
In preview mode, right-click the mouse to access a shortcut menu including Main Menu, Record Mode, Playback, PTZ Control, Alarm Output, Color Setting, Output Adjust, Logout, and View Mode Shift.
5.2 Main Menu Navigation
The main menu provides access to all DVR configurations and functions. Key sections include:
- Record: Configure recording settings, playback, backup.
- Alarm: Set up motion detection, video loss, alarm input/output.
- System: General settings, network, GUI display, PTZ.
- Advanced: HDD management, user accounts, maintenance.
- Info: View system information, logs.
Refer to pages 33-35 of the user manual PDF for a detailed table of main menu functions.
5.3 Record Functions
5.3.1 Record Configuration
Configure recording parameters for each surveillance channel. Default is 24-hour continuous recording.
- Channel: Select channels for configuration.
- Redundancy: Enable double backup to two hard disks (requires two HDDs).
- Length: Set video file length (default 60 minutes).
- Pre-Record: Record 1-30 seconds before an event.
- Record Mode: Schedule (regular, detection, alarm), Manual, or Stop.
5.3.2 Playback
Access recorded video files via the desktop shortcut menu or Main Menu > Record > Playback. The HDD must be set to read-write or read-only.
5.3.3 Backup
Backup video files to external storage (e.g., USB disk). The storage device must be connected before backup. Backup format can be H.264 or AVI.
5.3.4 Snapshot Storage
Configure snapshot parameters for channels. Snapshots can be scheduled, manual, or triggered by events.
5.4 Alarm Functions
The DVR supports various alarm functions to enhance security monitoring.
5.4.1 Motion Detect
Triggers an alarm when motion is detected within the camera's view. Configure sensitivity, region, period, alarm output, record channel, PTZ activation, and notification methods (message, email, buzzer, FTP upload).
5.4.2 Video Blind
Triggers an alarm if the camera's view is obstructed or tampered with (e.g., covered). Configuration is similar to motion detect.
5.4.3 Video Loss
Triggers an alarm if the DVR loses the video signal from a camera. Configuration is similar to motion detect.
5.4.4 Alarm Input/Output
Configure external alarm inputs (e.g., door sensors) and outputs (e.g., sirens) to integrate with the system.
5.4.5 Abnormal
The DVR can alert you to system abnormalities such as HDD errors, network disconnections, or IP conflicts.
5.4.6 Intelligent Analysis
Advanced video analysis features (e.g., perimeter alert, item care, video diagnosis) can trigger alarms based on specific rules and object behaviors.
5.5 System Setup
Configure various system parameters to customize your DVR's operation.
5.5.1 General Settings
Set system time, date format, language, HDD full operation, DVR number, video standard, auto logout, and machine name.
5.5.2 Encode Setup
Configure video/audio compression parameters (H.265), resolution (8MP, 4K), frame rate, bit rate type, and quality for main and extra streams.
5.5.3 Network Setup
Configure IP address, subnet mask, gateway, DNS, media port, HTTP port, and transfer policy for network access.
5.5.4 NetService
Configure advanced network services like PPPoE, NTP, Email, DDNS, FTP, AlarmServer, Mobile Monitor, UPNP, and Cloud services.
5.5.5 GUI Display
Customize the on-screen display elements such as channel title, time display, record status, alarm status, and resolution.
5.5.6 PTZ Device / RS485 / RS232
Configure settings for PTZ cameras (protocol, address, baud rate) and serial communication ports (RS485, RS232).
5.5.7 Tour / Spot / Channel Manage
Set up camera tours, spot monitor configurations, and manage digital/analog channels.
5.6 Advanced Settings
Access advanced system management tools.
5.6.1 HDD Manage
Manage hard disks: set read/write status, format, recover, and partition.
5.6.2 Account Management
Manage user accounts and groups, set permissions, and change passwords.
5.6.3 Online User
View currently connected network users.
5.6.4 Auto Maintain
Configure automatic reboot and file deletion schedules.
5.6.5 Restore / Upgrade / Device Info / Import/Export
Restore settings to default, upgrade firmware, view device information, and import/export configurations or logs.
5.7 Cloud Technology Basic Operation
The DVR supports cloud technology for easy remote monitoring via wide area networks using the device's serial number.
5.7.1 Cloud Technology Monitor
Connect the device to WAN, then check Main Menu > Info > Version to confirm successful connection to the cloud server.
5.7.2 Log in Cloud Server
Visit http://xmeye.net to log in by user (requires registration) or by device (using serial number and verify code).
5.7.3 Device Management
Add devices to monitor by entering their serial numbers. Access and control added devices online.
6. Maintenance
- Regularly clean printed circuit boards, connectors, fans, and the machine box.
- Ensure proper grounding to prevent video/audio signal interference and protect the DVR from static or inductive electricity.
- Do not pull out video signal lines or RS-232/RS-485 ports while the power is on.
- Do not use a TV in the local video output port (VOUT) of the DVR, as it can damage the video output circuit.
- Do not turn off the switch directly. Use the turn-off function in the menu or press the turn-off button on the panel (3 seconds or longer) to protect the hard disk.
- Keep the DVR away from heat sources.
- Ensure the DVR is well-ventilated for better heat dissipation.
- Regularly check and maintain the system.
7. Troubleshooting (FAQ)
If you encounter problems not listed here, please contact your local service provider or the HQ service.
7.1 DVR Cannot Boot Up Normally
- Incorrect power supply.
- Poor power supply line connection.
- Damaged power supply switch.
- Incorrect program update.
- Damaged hard disk or hard disk lines.
- Damaged front panel or main board.
7.2 DVR Reboots Automatically or Stops Working
- Unstable or low input voltage.
- Damaged hard disk or hard disk lines.
- Low power from the switch power supply.
- Unstable frontal video signal.
- Poor heat dissipation (bad radiator, too much dust).
- Damaged hardware.
7.3 System Cannot Detect Hard Disk
- Hard disk power supply line not connected.
- Damaged hard disk cables.
- Damaged hard disk.
- Damaged SATA port on the main board.
7.4 No Video Output
- Program mismatch (update program).
- Image brightness is 0 (restore default setup).
- No or weak video input signal.
- Channel or screen protection is set.
- Damaged DVR hardware.
7.5 Real-time Image Problems (Color/Brightness Distortion)
- Incorrect NTSC/PAL mode setting for BNC output.
- DVR not matched to monitor impedance.
- Excessive video transmission distance or signal loss.
- Incorrect color/brightness settings on DVR.
7.6 Cannot Find Video Files in Local Playback
- Damaged hard disk data line or hard disk.
- Program update issues.
- Video files overwritten.
- Recording is not active.
7.7 Local Video Not Clear
- Poor image quality.
- Reading program error (reboot DVR).
- Damaged hard disk data line or hard disk.
- Damaged DVR hardware.
7.8 No Audio Signal
- No active microphone or speaker.
- Damaged audio lines.
- Damaged DVR hardware.
7.9 DVR Cannot Control PTZ
- Frontal PTZ issues.
- Incorrect PTZ decoder settings, connection, or installation.
- Incorrect connections.
- Incorrect DVR PTZ settings.
- Mismatched PTZ decoder/DVR protocols or addresses.
- Excessive distance.
7.10 Motion Detect Not Working
- Incorrect time range setting.
- Incorrect motion detect area setting.
- Sensitivity too low.
7.11 Cannot Login via Web or CMS
- Outdated Windows OS (recommend Windows 2000sp4 or higher).
- ActiveX blocked.
- Display card driver issues (update to DX8.1 or higher).
- Network connection failure or incorrect settings.
- Invalid password/username.
- CMS not matched to DVR program version.
7.12 Network Connection Not Stable
- Network instability.
- IP address conflict.
- MAC address conflict.
- Damaged DVR network card.
For a complete list of troubleshooting steps, refer to pages 89-94 of the user manual PDF.
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | Jaxcam |
| Model Number | KT-6808-660B |
| Resolution | 8MP (3072x2048) |
| Video Input | 8 Channel |
| TV System | NTSC, PAL |
| PCS of Camera | 4PCS or 8PCS (depending on kit) |
| Video Compression | H.265 |
| Camera Weatherproof | IP66 |
| Night Vision | Infrared with IR-Cut Filter |
| Remote Access | Xmeye APP (iOS, Android), PC Client, Web Browsers |
| Motion Detection | Supported, with Email Alerts |
| Certification | CE, FCC |
| Origin | Mainland China |
| Package Dimensions (approx.) | Length: 39cm, Width: 25cm, Height: 32cm |
| Package Weight (approx.) | 3.6 kg |
9. User Tips
Based on common user experiences, here are some tips to enhance your system's performance:
- Initial Setup: Always change the default "admin" password immediately after the first login for enhanced security.
- Hard Drive: If you plan for extensive recording, consider installing a larger capacity hard drive. Ensure it's properly formatted and set to read-write mode.
- Network Configuration: For reliable remote viewing, ensure your DVR is connected to a stable internet connection and that network settings (IP, DNS, port forwarding if needed) are correctly configured.
- Motion Detection: Adjust motion detection sensitivity carefully to minimize false alarms while ensuring critical events are captured. Test different sensitivity levels in your environment.
- Cable Management: Use high-quality cables and ensure all connections are secure to prevent signal loss or interference.
- Firmware Updates: Periodically check for firmware updates from the manufacturer to ensure optimal performance and access to new features.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact your vendor directly. Keep your purchase receipt as proof of purchase.
A PDF version of this manual is available for download: User Manual (PDF)