1. Product Overview
This manual provides instructions for the installation, operation, and maintenance of your ShangDeLi 12V/24V Car Charger Socket. This product is designed to provide convenient and fast charging for your mobile devices within your vehicle.
2. Safety Instructions (WARNING!)
For automotive use only. Please read and follow these instructions carefully to avoid fire, electric shock, or damage to the product and connected devices.
- Do not use in wet, humid environments or under rain, to prevent short circuit and electric shock.
- Do not disassemble, repair, or modify the product by yourself; unauthorized operation may cause safety hazards.
- Do not touch the product or its ports with wet hands when in use.
- Keep away from children and pets; small parts may cause choking hazards, and improper use may lead to burns or electric shock.
- Do not connect devices that exceed the rated power (18W) of the adapter, otherwise it may cause overheating, short circuit, or damage to the product and devices.
- Do not use the product while driving if it distracts your attention; ensure driving safety first.
- Do not expose the product to direct sunlight for a long time or place it in high-temperature environments (above 60°C), to prevent material deformation or internal component damage.
- This product is for automotive use only, not for household or other non-automotive scenarios.
3. Specifications
| Feature | Detail |
|---|---|
| Product Name | Car Charger Socket |
| Input Voltage | DC 12V-24V |
| Output Parameters | DC 5V/3A, 9V/2A, 12V/1.5A |
| Rated Power | 18W (Max) |
| Charging Type | Fast Charging |
| Material | Flame-retardant ABS + Pure Copper Core |
| Working Temperature | -10°C ~ 60°C |
| Fitment | Universal for 12V-24V cars, trucks, SUVs, vans, RVs (Specifically designed for Polo 2011-2013) |
| Color | Black |
| Backlight Color | Red |
| Size | 2.1cm (Height) x 3.2cm (Width) |
| Cable Length | 95cm |
| Package Content | 1*Car Charger, 1 x Connector with cable |
4. Installation Guide
4.1. Core Preparation (Vehicle-Specific Adaptation)
Tools Required:
- 2 plastic pry bars (for removing the button panel)
- Phillips screwdriver
- Cable ties
- Clean towel (to prevent scratches on interior trim)
Safety Precautions: Turn off the vehicle engine and set the key to the LOCK position before beginning installation.
4.2. Step-by-Step Installation Procedure
-
Remove the Original Blank Button Panel (Key Positioning):
- Wrap the plastic pry bar with a clean towel and insert it into the gap of the blank panel.
- Gently pry outward until the panel's clips pop out. Grasp the panel edges firmly and pull it out smoothly (avoid excessive force to prevent damage to surrounding trim).
- If there are pre-installed clip posts on the blank panel, break them off gently with your fingernails or a small screwdriver (to fit the socket's clip-free base).
-
Power Plug Connection (Non-Destructive Parallel Connection, Core Step):
- Locate the cigarette lighter (usually in the storage compartment in front of the gear shift lever). Use a pry bar to gently remove the cigarette lighter trim and pull out the cigarette lighter assembly.
- Unplug the white power plug from the back of the cigarette lighter assembly.
- Connect the white female plug with branch on the modification wiring harness to the cigarette lighter assembly.
- Plug the original white plug into the white male plug of the modification wiring harness. This forms a parallel circuit: Original Vehicle Harness → Modified Socket → Original Cigarette Lighter (ensures both the original cigarette lighter and new socket work simultaneously without function loss).
Figure 4: Rear view of the dual charger sockets, showing the connectors and wiring for power connection. -
Wiring & Socket Fixation (Hidden Wiring):
- Wiring Route: Route the modification harness from the cigarette lighter along the bottom of the gear shift boot → gaps inside the center console → rear of the button panel. Align it with the original vehicle harness and avoid blocking the gear shift travel.
- Socket Installation: Align the dual charging sockets (USB/Type-C) with the removed blank button slot. Push the sockets outward from inside the center console until you hear a "click" (indicates the clips are fully engaged, matching the feel of original buttons).
- Harness Organization: Secure the modification harness to the original center console harness with cable ties (1 tie every 15-20 cm). Keep it away from air conditioning ducts and sharp metal edges to prevent abnormal driving noise or harness abrasion.
5. Operating Instructions
-
Function Test: Turn the key to the ACC position. Plug a phone into the USB and Type-C ports respectively to confirm normal charging. The red LED backlight should illuminate when powered.
-
Original Cigarette Lighter Test: Verify that the original cigarette lighter still functions to confirm the parallel circuit works correctly.
-
Detailed Inspection: Touch the plug connections to ensure no overheating or unusual odors. Confirm the sockets are flush with the panel (no looseness) and do not interfere with gear shifting.
-
Final Reassembly: Press the edges of the button panel firmly to reset all clips. Wipe the interior trim with a clean towel to complete the installation.
6. Maintenance
- Keep the charger ports clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Avoid spilling liquids on the charger socket.
- Regularly check the wiring for any signs of wear or damage.
7. Troubleshooting
-
No Power/Charging:
- Ensure the vehicle's ignition is in the ACC or ON position.
- Check all wiring connections to ensure they are secure.
- Verify that the original cigarette lighter is functioning, as the charger socket operates in parallel.
- Test with a different USB cable and device to rule out cable or device issues.
-
Overheating:
- The total power of the dual charging sockets should not exceed 60W. Avoid connecting high-power on-board devices simultaneously that might exceed this limit.
- If overheating occurs, disconnect devices immediately and check for faulty wiring or excessive load.
-
Loose Sockets / Rattling:
- If the sockets are slightly loose after installation, attach a thin layer of foam tape to the socket sides to enhance fixation and eliminate rattling.
- Ensure the clips are fully engaged during installation.
8. User Tips
- Always double-check the compatibility of the charger socket with your specific car model (Polo 2011-2013) before attempting installation.
- When routing cables, ensure they do not interfere with any moving parts of the vehicle, such as the gear shift or pedals.
- For optimal charging performance, use high-quality USB cables that support fast charging.
9. Warranty and Support
For specific warranty information, please refer to the terms and conditions provided by your retailer or contact ShangDeLi customer support directly.
For further detailed instructions or diagrams, you may refer to the official user manual PDF available at: ShangDeLi Car Charger Socket User Manual (PDF)