1. Product Overview
This document provides detailed instructions for the installation and safe operation of your Car Charger Socket. This product is designed to provide fast charging capabilities for your mobile devices in compatible vehicles.
Basic Specifications
| Feature | Detail |
|---|---|
| Product Name | Car Charger Socket |
| Batch/Serial Number | Car Charger Socket |
| Input Voltage | DC 12V-24V |
| Output Parameters | DC 5V/3A, 9V/2A, 12V/1.5A |
| Rated Power | 18W (Max) |
| Charging Type | Fast Charging |
| Material | Flame-retardant ABS + Pure Copper Core |
| Working Temperature | -10°C ~ 60°C |
| Fitment | Universal for 12V-24V cars, trucks, SUVs, vans, RVs |
2. Safety Instructions (WARNING!)
WARNING! For automotive use only. Please read and follow these instructions carefully to avoid fire, electric shock, or damage to the product and connected devices.
- Do not use in wet, humid environments or under rain, to prevent short circuit and electric shock.
- Do not disassemble, repair or modify the product by yourself; unauthorized operation may cause safety hazards.
- Do not touch the product or its ports with wet hands when in use.
- Keep away from children and pets; small parts may cause choking hazard, and improper use may lead to burns or electric shock.
- Do not connect devices that exceed the rated power (18W) of the adapter, otherwise it may cause overheating, short circuit or damage to the product and devices.
- Do not use the product while driving if it distracts your attention; ensure driving safety first.
- Do not expose the product to direct sunlight for a long time or place it in high-temperature environments (above 60°C), to prevent material deformation or internal component damage.
- This product is for automotive use only, not for household or other non-automotive scenarios.
3. Installation Guide
I. Core Preparation (Vehicle-Specific Adaptation)
Before beginning installation, ensure you have the necessary tools and take appropriate safety precautions.
- Tools: 2 plastic pry bars (for removing the button panel), Phillips screwdriver, cable ties, clean towel (to prevent scratches on interior trim).
- Safety Precautions: Turn off the vehicle engine and set the key to the LOCK position.
II. Step-by-Step Installation Procedure
-
Step 1: Remove the Original Blank Button Panel (Key Positioning)
- Wrap the plastic pry bar with a clean towel and insert it into the gap of the blank panel.
- Gently pry outward until the panel's clips pop out. Grasp the panel edges firmly and pull it out smoothly (avoid excessive force to prevent damage to surrounding trim).
- If there are pre-installed clip posts on the blank panel, break them off gently with your fingernails or a small screwdriver (to fit the socket's clip-free base).
-
Step 2: Power Plug Connection (Non-Destructive Parallel Connection, Core Step)
- Locate the cigarette lighter (usually in the storage compartment in front of the gear shift lever). Use a pry bar to gently remove the cigarette lighter trim and pull out the cigarette lighter assembly.
- Unplug the white power plug from the back of the cigarette lighter assembly.
- Connect the white female plug with branch on the modification wiring harness to the cigarette lighter assembly.
- Plug the original white plug into the white male plug of the modification wiring harness. This forms a parallel circuit: Original Vehicle Harness → Modified Socket → Original Cigarette Lighter (ensures both the original cigarette lighter and new socket work simultaneously without function loss).
Figure 4: Close-up of the charger socket and wiring for connection.
Figure 5: Wiring harness detail. -
Step 3: Wiring & Socket Fixation (Hidden Wiring)
- Wiring Route: Route the modification harness from the cigarette lighter along the bottom of the gear shift boot → gaps inside the center console → rear of the button panel. Align it with the original vehicle harness and avoid blocking the gear shift travel.
- Socket Installation: Align the dual charging sockets (USB/Type-C) with the removed blank button slot. Push the sockets outward from inside the center console until you hear a "click" (indicates the clips are fully engaged, matching the feel of original buttons).
- Harness Organization: Secure the modification harness to the original center console harness with cable ties (1 tie every 15-20 cm). Keep it away from air conditioning ducts and sharp metal edges to prevent abnormal driving noise or harness abrasion.
Figure 6: Side view of the charger socket and wiring, useful for routing.
4. Operating Instructions
Power Test & Interior Reassembly
- Function Test: Turn the key to the ACC position. Plug a phone into the USB and Type-C ports respectively to confirm normal charging; test the original cigarette lighter to verify the parallel circuit works.
- Detailed Inspection: Touch the plug connections to ensure no overheating or unusual odors. Confirm the sockets are flush with the panel (no looseness) and do not interfere with gear shifting.
- Final Reassembly: Press the edges of the button panel firmly to reset all clips. Wipe the interior trim with a clean towel to complete the installation.
5. Vehicle-Specific Notes
- Power Adaptation: The total power of the dual charging sockets should not exceed 60W (avoid connecting high-power on-board devices simultaneously).
- Anti-Rattle Measure: If the sockets are slightly loose after installation, attach a thin layer of foam tape to the socket sides to enhance fixation and eliminate rattling.
6. Maintenance
- Keep the charger socket clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Avoid exposing the unit to liquids or excessive moisture.
- Regularly check the connections for any signs of wear or damage.
7. Troubleshooting
- Device not charging: Ensure the vehicle's ignition is in the ACC position or the engine is running. Check that the charging cable is securely connected to both the device and the charger socket. Verify that the device itself is functioning correctly.
- Overheating: If the charger or connected device feels excessively hot, immediately disconnect it. Ensure that the total power draw does not exceed 18W and avoid connecting high-power devices simultaneously. Check for proper ventilation around the charger.
- Loose fit/Rattling: Refer to the "Anti-Rattle Measure" in Section 5 to secure the socket more firmly.
- No power to the socket: Check the vehicle's fuse box for any blown fuses related to the cigarette lighter or accessory power. Ensure all wiring connections are secure as per the installation guide.
8. Warranty and Support
For any issues or questions not covered in this manual, please contact the seller or manufacturer for support. Keep your purchase receipt for warranty claims.
A detailed user manual in PDF format is available for download: View User Manual (PDF)