1. Introduction
Thank you for choosing the elough ZJ-05 Induction Bluetooth Speaker Stand. This device combines a high-fidelity Bluetooth speaker with a convenient phone/tablet stand, featuring magnetic induction for effortless connectivity and vibrant RGB lighting to enhance your audio experience. Please read this manual carefully to ensure proper use and maintenance of your device.

Image 1: elough ZJ-05 Induction Bluetooth Speaker Stand
2. Product Features
- 2-in-1 Design: Functions as both a high-quality Bluetooth speaker and a stable stand for your smartphone or tablet.
- Magnetic Induction: Built-in magnetic sensor module allows for instant, automatic Bluetooth connection simply by placing your phone on the speaker's surface.
- Bluetooth 5.3: Advanced Bluetooth version for stable connection, extended transmission range (up to 10m), reduced power consumption, and faster transmission speeds for lag-free audio-video synchronization.
- Vibrant RGB Lighting: Circular gradient RGB lighting that pulses and changes with the beat of your music, creating a dynamic atmosphere.
- Hi-Fi Sound Quality: Equipped with 52mm large-diameter speakers for balanced, clear sound across all frequency ranges, delivering detailed vocals and powerful bass. Features 360° surround sound for even distribution.
- Sturdy & Adjustable Stand: Provides secure placement for your device, offering hands-free convenience for viewing and video calls.
- Long Battery Life: Integrated 1200mAh lithium battery provides 5-8 hours of continuous playback on a single charge.
- Wide Compatibility: Supports all Bluetooth-enabled devices, including smartphones, tablets, and laptops, compatible with iOS, HarmonyOS, and Android systems.

Image 2: Overview of Key Features
3. Setup
3.1 Initial Charge
Before first use, it is recommended to fully charge your device. Connect the provided Type-C cable to the speaker's input port and the other end to a certified USB power adapter (DC 5V). The charging time is approximately 3 hours.
3.2 Powering On/Off
- To Power On: Press and hold the power button until the RGB lights illuminate and you hear an audible prompt. The device will enter pairing mode.
- To Power Off: Press and hold the power button again until the lights turn off.
4. Operating Instructions
4.1 Connecting via Magnetic Induction (Automatic)
- Ensure the speaker is powered on and in pairing mode.
- Gently place your Bluetooth-enabled smartphone or tablet directly onto the sensor surface of the speaker stand.
- The device will automatically attach magnetically and establish a Bluetooth connection. You will hear a confirmation sound.
- Audio playback will begin immediately from your connected device.

Image 3: Wireless Connection via Magnetic Induction
4.2 Connecting via Manual Bluetooth Pairing
- Ensure the speaker is powered on and in pairing mode (RGB lights will be active).
- On your Bluetooth-enabled device (smartphone, tablet, laptop), go to the Bluetooth settings.
- Search for available devices and select "ZJ-05" (or similar name) from the list.
- Once connected, you will hear a confirmation sound from the speaker.

Image 4: Bluetooth Compatibility
4.3 Adjusting RGB Lighting
The RGB lighting automatically pulsates with the music. There are no manual controls for changing light patterns or colors; the system is designed to provide a dynamic visual experience synchronized with your audio.
5. Maintenance
5.1 Cleaning
- Wipe the device with a soft, dry, or slightly damp cloth.
- Do not use abrasive cleaners, solvents, or strong chemicals, as they may damage the surface.
5.2 Storage
- Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- If not in use for an extended period, charge the device periodically (e.g., every 3 months) to maintain battery health.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on | Low battery | Charge the device fully using the Type-C cable. |
| Cannot connect via Bluetooth | Device not in pairing mode; Bluetooth disabled on source device; too far from source device | Ensure speaker is on and in pairing mode. Enable Bluetooth on your device. Move speaker closer to your device (within 10m). Try manual pairing. |
| No sound | Volume too low; device not connected; audio source issue | Increase volume on both speaker and source device. Ensure successful Bluetooth connection. Check audio playback on your source device. |
| Magnetic connection not working | Phone not placed correctly; phone case too thick | Ensure phone is centered on the sensor surface. Remove thick phone cases that might interfere with magnetic induction. |
7. Specifications
| Feature | Detail |
|---|---|
| Model | ZJ-05 |
| Power Output | 5W x 1 |
| Output | 5V-1A |
| Speaker Size | 52mm |
| Material | ABS + Silicone |
| Playback Time | 5-8 hours |
| Playback Modes | Bluetooth / Induction |
| Bluetooth Version | 5.3 |
| Charging Time | 3 hours |
| Bluetooth Range | 10 meters |
| Dimensions (L x W x H) | 110 x 96 x 115 mm |
| Input | DC 5V (Type-C) |
| Available Colors | Black / White |
| Input Power (W) | <25 W |
| Audio Crossover | Full-Range |
| Cabinet Material | Plastic |
| Inbox Adaptor | Yes |
| Waterproof | No |
| Voice Control | No |
| Support APP | No |

Image 5: Detailed Product Specifications
8. User Tips
- For the best magnetic connection, ensure your phone is placed centrally on the speaker's surface.
- If you experience any interference with the magnetic connection, try removing your phone case.
- To maximize battery life, fully charge the device before extended use and avoid completely draining the battery frequently.
9. Precautions
- Avoid dropping or crushing the device.
- Keep the device away from high-temperature and humid environments.
- Use only a certified charger (DC 5V) for charging.
- Do not disassemble the product yourself, as this will void any potential support.
10. Warranty and Support
For any issues or inquiries regarding your elough ZJ-05 Induction Bluetooth Speaker Stand, please refer to your purchase documentation or contact the seller directly for support. Keep your proof of purchase for any warranty claims.