DIANQI ME-8108, ME-8104, ME-8111, ME-8112, ME-8122

Contents

DIANQI Limit Switch Instruction Manual

Models: ME-8108, ME-8104, ME-8111, ME-8112, ME-8122

Introduction

This manual provides essential information for the safe and effective use of your DIANQI Limit Switch. Please read it thoroughly before installation and operation. These limit switches are designed for controlling motion in various industrial applications, featuring a double circuit type with NO (Normally Open) and NC (Normally Closed) contacts.

Various DIANQI Limit Switch models with 1 NO + 1 NC contacts
Figure 1: Assortment of DIANQI Limit Switch models, each featuring 1 Normally Open (NO) and 1 Normally Closed (NC) contact configuration.

Safety Information

WARNING:

  • Keep away from fire.
  • Due to small parts, keep away from children under three years of age.
  • Do not inhale spray or fumes.
  • Keep dry. Protect from moisture.
  • Do not crush or impact the device.
  • Not for consumption. Non-edible.
  • Keep out of reach of children. Choking hazard.
  • In case of ingestion, seek medical attention immediately.
  • Ensure you have a certain level of manual dexterity before installing or operating this product.
  • This product is not suitable for children under 14 years.

Product Overview

The DIANQI Limit Switches are electromechanical devices designed to detect the presence or absence of an object, or to monitor the travel limits of moving machinery. They are robust and reliable, suitable for various industrial control applications.

Key features include:

  • Double circuit contact type.
  • 5A load current capacity.
  • Variety of actuator types (rotary adjustable roller, plunger, spring rod) to suit different applications.
Video 1: Demonstration of various limit switch types and their mechanical activation, including a basic circuit setup with an indicator light.

Specifications

Attribute Value
Switch Type Limit switch
Contact Configuration 1 NO + 1 NC (Double Circuit)
Load Current 5A
EU LVD Voltage High voltage: Above 50Vac or 75Vdc
Material Plastic
Is Smart Device No
Origin Mainland China
Certification CE
High-concerned chemical None

Dimensions by Model:

  • Dimensions for ME-8108 Limit Switch
    Figure 2: Dimensions for Model ME-8108 (Approx. 121mm/4.76in Length, 88mm/3.46in Width, 29mm/1.14in Height).
  • Dimensions for ME-8104 Limit Switch
    Figure 3: Dimensions for Model ME-8104 (Approx. 127mm/5.0in Length, 88mm/3.46in Width, 29mm/1.14in Height).
  • Dimensions for ME-8111 Limit Switch
    Figure 4: Dimensions for Model ME-8111 (Approx. 99mm/3.89in Length, 29mm/1.14in Height).
  • Dimensions for ME-8122 Limit Switch
    Figure 5: Dimensions for Model ME-8122 (Approx. 110mm/4.33in Length, 29mm/1.14in Height).
  • Dimensions for ME-8112 Limit Switch
    Figure 6: Dimensions for Model ME-8112 (Approx. 110mm/4.33in Length, 64mm/2.52in Width, 29mm/1.14in Height).

Setup and Installation

Installation should be performed by qualified personnel familiar with electrical systems and safety procedures. Ensure power is disconnected before beginning any installation work.

  1. Mounting: Securely mount the limit switch to a stable surface using appropriate fasteners. Ensure the switch is positioned so that its actuator can be reliably engaged by the moving part it is intended to monitor.
  2. Wiring: Connect the electrical wires to the NO (Normally Open) and NC (Normally Closed) terminals as required by your control circuit. Refer to the specific wiring diagram for your application. The switch typically has a double circuit, meaning it provides both NO and NC contacts for flexibility.
  3. Actuator Adjustment: Adjust the position and orientation of the actuator (e.g., roller lever, plunger) to ensure proper engagement and disengagement by the target object. The actuator should be depressed sufficiently to trigger the switch reliably without excessive force that could cause damage.
  4. Testing: After installation, carefully test the switch's operation with the power reconnected. Verify that the switch activates and deactivates at the desired points and that the control circuit responds correctly.

Operating Instructions

DIANQI Limit Switches operate based on mechanical contact. When a moving object makes contact with the switch's actuator, it causes the internal contacts to change state (NO contacts close, NC contacts open). This change in state signals the control system.

  • Normal Operation: The switch remains in its default state (e.g., NO open, NC closed) until the actuator is engaged.
  • Actuation: When the actuator is pressed or moved by the target object, the contacts switch states.
  • Release: Upon release of the actuator, the contacts return to their default state.

Ensure that the operating speed and force of the activating object are within the switch's mechanical specifications to prevent premature wear or damage.

Maintenance

Regular maintenance helps ensure the longevity and reliable operation of your limit switch.

  • Cleaning: Keep the switch and its actuator free from dust, dirt, oil, and other contaminants. Use a dry, soft cloth for cleaning. Avoid using harsh chemicals or abrasive materials.
  • Inspection: Periodically inspect the switch for any signs of physical damage, wear on the actuator, loose connections, or corrosion.
  • Lubrication: Actuator mechanisms, especially roller types, may benefit from light lubrication with a suitable industrial lubricant if they show signs of stiffness or friction.
  • Tightness: Check mounting screws and electrical terminal connections for tightness. Loose connections can lead to intermittent operation or overheating.
  • Environmental Protection: Ensure the switch's environmental rating (e.g., IP rating) is appropriate for its operating conditions. Protect it from excessive moisture, extreme temperatures, and corrosive atmospheres.

Troubleshooting

If you encounter issues with your limit switch, consider the following:

Problem Possible Cause Solution
Switch not activating Actuator not fully depressed; wiring error; faulty switch. Adjust actuator position; check wiring connections; test switch continuity.
Intermittent operation Loose wiring; debris interfering with actuator; worn contacts. Tighten connections; clean actuator area; replace switch if contacts are worn.
Switch stuck in one state Actuator jammed; internal mechanical failure. Clear any obstructions; replace switch.
No electrical signal No power to circuit; incorrect wiring; open circuit. Verify power supply; check wiring against diagram; test for continuity.

User Tips

  • When selecting a limit switch, consider the type of actuator that best suits the motion and force of the object it will interact with.
  • For applications requiring precise detection, ensure the mounting is rigid and the actuator's travel is consistent.
  • Regularly check the physical condition of the switch, especially in high-cycle applications, to prevent unexpected failures.

Frequently Asked Questions (FAQ)

Q: What does 'NO NC' mean?
A: NO stands for Normally Open, meaning the contacts are open (no current flow) in the switch's default state. NC stands for Normally Closed, meaning the contacts are closed (current flows) in the default state. When the switch is actuated, these states reverse.
Q: Can these switches be used outdoors?
A: The suitability for outdoor use depends on the specific IP (Ingress Protection) rating of the model. Always check the product's IP rating to ensure it meets the environmental requirements of your application.
Q: What is the lifespan of a limit switch?
A: The lifespan (mechanical and electrical durability) varies significantly based on the model, operating conditions, load, and frequency of operation. Refer to the product's technical datasheet for specific durability ratings.

Warranty and Support

For any questions, technical support, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase records for reference.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.