TEENRAM 9006/HB4

Contents

TEENRAM 9006/HB4 LED Headlight User Manual

Model: 9006/HB4

1. Introduction

Thank you for choosing TEENRAM LED Headlights. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new LED headlights. Please read this manual thoroughly before installation and keep it for future reference.

2. Important Safety Information

FCC Compliance Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Important Warning: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.

General Safety Precautions:

  • Always ensure the vehicle's power is off before attempting installation or maintenance.
  • Wear appropriate safety gear, such as gloves and eye protection, during installation.
  • Do not touch the LED chips directly, as this can damage them.
  • Ensure all connections are secure to prevent electrical shorts.
  • Keep the product away from excessive heat or open flames.

3. Package Contents

Please check the package for the following items:

  • 2 x TEENRAM 9006/HB4 LED Headlight Bulbs

4. Specifications

FeatureSpecification
Model9006/HB4
Rated Current1.5A-10A
Operating Voltage9-32V (Compatible with 12V/24V systems)
Power120W/SET
Lumens20000LM/SET
Color Temperature6500K White
Lifespan>50,000 hours
Waterproof RatingIP68
Cooling SystemAviation 6063 Aluminum Lamp Body, Internal 120000rpm Turbo Fan
Working Temperature-40°C to +135°C
Light Source3570 CSP Chips (16 CSP chips, 1860 CSP Headlight core)
CertificationCE
OriginMainland China
Internal DriveYes (Built-in Smart Driver)
FunctionHeadlamp, Fog Lamp
EMCBuilt-in EMC Anti-Radio Noise
Beam Angle360° Illumination, 1:1 Halogen Beam Design, Adjustable Beam
Canbus Compatibility99% Canbus Error Free

5. Setup and Installation

TEENRAM LED headlights are designed for easy, non-polarity installation, offering a plug-and-play experience without the need for additional adapters or modifications.

  1. Preparation: Ensure your vehicle's engine is off and the headlights are switched off. Allow any existing halogen bulbs to cool down if they were recently in use.
  2. Access Headlight Assembly: Open the hood of your vehicle and locate the back of the headlight assembly. You may need to remove some covers or components to gain access, depending on your vehicle model.
  3. Remove Old Bulb: Disconnect the electrical connector from the existing headlight bulb. Then, unclip or twist to remove the old bulb from its housing.
  4. Install LED Bulb: Insert the TEENRAM LED headlight bulb into the housing. Ensure it is seated correctly and securely. The non-polarity design means it can be inserted in any orientation.
  5. Connect Electrical Connector: Reconnect the vehicle's electrical connector to the new LED bulb. Ensure a snug and secure connection.
  6. Test Functionality: Turn on your vehicle's headlights to test the new LED bulbs. Check both low beam and high beam functions.
  7. Secure Components: Reinstall any covers or components that were removed during step 2.
TEENRAM 9006/HB4 LED Headlight Bulbs and Connector
Figure 1: TEENRAM 9006/HB4 LED Headlight Bulbs and Connector
TEENRAM 9006/HB4 LED Headlight Bulbs in front of a car
Figure 2: TEENRAM 9006/HB4 LED Headlight Bulbs (Product Overview)
Built-in EMC Anti-Radio Noise Driver
Figure 3: Built-in EMC Anti-Radio Noise Driver for stable performance and reduced interference.
Built-in Smart Driver for LED Headlights
Figure 4: Built-in Smart Driver featuring intelligent temperature control, smart power saving, and intelligent decoding for Canbus compatibility.

6. Operating Instructions

Once installed, your TEENRAM LED headlights operate like standard vehicle headlights. They are designed to provide superior illumination for safer night driving.

  • Low Beam: Provides a wider illumination angle, ideal for general driving conditions and avoiding dazzling oncoming traffic.
  • High Beam: Projects light to a longer distance, suitable for driving on unlit roads where maximum visibility is required.

The 1:1 halogen beam design and ultra-thin chip copper plate ensure 360° illumination without dark spots, providing a clear and safe view of the road ahead without blinding other drivers.

Incredible Lighting Pattern: Low Beam vs High Beam
Figure 5: Incredible Lighting Pattern showing wider illumination for low beam and longer distance for high beam.

7. Maintenance

TEENRAM LED headlights are designed for durability and long life with minimal maintenance.

  • Cleaning: Periodically clean the headlight lenses with a soft, damp cloth to ensure maximum light output. Avoid using abrasive cleaners or solvents that could damage the lens.
  • Inspection: Occasionally check the bulbs for any signs of damage or loose connections.
  • Cooling System: The aviation aluminum body and internal turbo fan ensure efficient cooling. Ensure no debris obstructs the cooling fins or fan area.
  • Weather Resistance: The IP68 waterproof design allows the headlights to perform reliably in various weather conditions, including rain, snow, and fog.
Efficient Cooling System for LED Headlights
Figure 6: Efficient Cooling System with 120000rpm turbo fan and aviation 6063 aluminum body.
LED Headlight for Extreme Weather Conditions
Figure 7: Designed for Extreme Weather, performing brightly in rain, snow, and fog.

8. Troubleshooting

ProblemPossible CauseSolution
Headlight does not turn onLoose connection, faulty bulb, vehicle fuse blownCheck all electrical connections. Ensure the bulb is properly seated. Check vehicle's headlight fuse.
Flickering, interference, or error light on dashboardVehicle's CAN bus system requires additional resistance for LED bulbs.Your car may require a resistor canceller/decoder (sold separately) to resolve these issues.
One headlight is dimmer than the otherPoor connection, voltage drop, or faulty bulb.Check connections for both bulbs. Ensure consistent voltage supply. If problem persists, replace the dimmer bulb.
Radio interferenceDespite built-in EMC, some vehicles may experience minor interference.Refer to FCC compliance section for interference troubleshooting steps (reorient antenna, increase separation, etc.).

9. User Tips

No specific user tips from reviews or Q&A are available at this time. For optimal performance, ensure proper installation and alignment of the bulbs.

10. Warranty and Support

For warranty information and customer support, please refer to your purchase documentation or contact the seller directly. Keep your proof of purchase for any warranty claims.

© 2024 TEENRAM. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.