YTYIN UCC-328

Contents

PD QC3.0 Car Charger Socket User Manual

Model: UCC-328

1. Introduction

Thank you for purchasing the YTYIN PD QC3.0 Car Charger Socket. This device is designed to provide fast and efficient charging for your mobile devices in various 12V/24V vehicles, including cars, motorcycles, trucks, ATVs, RVs, and buses. It features both Power Delivery (PD) Type-C and Quick Charge 3.0 (QC3.0) USB-A ports, ensuring broad compatibility and rapid charging capabilities.

2. Safety Information

Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Do not use this product for purposes other than its intended use.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.
  • Handle with care to avoid cuts or injuries.

3. Package Contents

  • 1 x PD QC3.0 Car Charger Socket
  • 2 x Mounting Screws (pre-installed or included)

4. Setup and Installation

Wiring Instructions

The charger socket comes with pre-attached wires for power connection:

  • Red Wire: Connect to the positive (+) terminal of your vehicle's power source.
  • Black Wire: Connect to the negative (-) terminal of your vehicle's power source.

Labeled diagram of the car charger showing positive and negative wire connections, dust cover, indicator light, and USB ports.
Figure 1: Charger Components and Wiring

Mounting

The charger is designed for easy panel mounting:

  1. Choose a suitable location on your vehicle's dashboard or panel. Ensure there is enough space behind the panel for wiring.
  2. Drill a rectangular cutout or appropriate holes for the charger body and screw mounts.
  3. Insert the charger into the cutout.
  4. Secure the charger using the two provided screws.

Diagram showing how to install screws and close the panel for mounting the charger.
Figure 2: Screw Installation Process

Installation Scenarios

This charger is suitable for a wide range of 12V/24V vehicles:

  • Cars
  • Buses
  • Caravans/RVs
  • Vessels/Boats
  • Motorcycles
  • Trucks
  • ATVs

Illustrations of various installation scenarios including a car, bus, caravan, and vessel.
Figure 3: Various Vehicle Installation Scenarios

Photo showing the charger installed in a vehicle interior, specifically on the side panel near bus seats.
Figure 4: Example of In-Vehicle Installation

5. Operating Instructions

  1. Before First Use: Remove any protective films from the device.
  2. Power On: Once correctly wired and the vehicle's ignition is on (if connected to a switched power source), the charger will be active. A blue LED indicator light will illuminate, signifying that the charger is powered and ready for use.
  3. Charging Devices: Connect your USB-powered devices (mobile phones, tablets, etc.) to the appropriate charging port:
    • Use the USB-C (PD) port for devices compatible with Power Delivery.
    • Use the USB-A (QC3.0) port for devices compatible with Quick Charge 3.0 or standard USB charging.
  4. Dust Cover: The charger features an auto-rebound self-locking dust cover to protect the ports from dust and water when not in use.
  5. After Use: Disconnect your devices. If the charger is wired to an always-on power source, it will remain active. If wired to a switched source, it will power off with the vehicle's ignition.

Main product view of the PD QC3.0 car charger with dual ports, showing its application in various vehicles.
Figure 5: PD QC3.0 Car Charger in Use

Product in use, highlighting 12-24V input, PD+QC3.0 fast charging, and auto-rebound dust cover.
Figure 6: Fast Charging and Dust Cover Feature

6. Maintenance & Storage

  • Cleaning: Turn off the device (if possible, by disconnecting power) before cleaning. Use a soft, lint-free cloth to wipe the surface. Do not use abrasive cleaners or solvents.
  • Storage: Store in a dry place at room temperature (15°C - 35°C).
  • Long-term Storage: If the device is removed from the vehicle and not used for a long time, store it in a protective, dry environment.

7. Troubleshooting & Stop-Use Conditions

Troubleshooting

If the product does not function as expected, stop using it and check:

  • Correct installation and wiring (positive to positive, negative to negative).
  • Vehicle's power supply is active (e.g., ignition is on if wired to a switched circuit).
  • The device you are trying to charge is functioning correctly and its cable is not damaged.

Stop-Use Conditions

Stop using the product immediately if you notice any of the following:

  • Abnormal heat
  • Unusual smell
  • Smoke
  • Leakage
  • Deformation
  • Any unusual noise

In such cases, safely disconnect power to the charger and contact customer support.

8. Specifications

FeatureSpecification
ModelUCC-328
MaterialABS
Input VoltageDC 12V-24V
Output Ports1 x USB-C (PD), 1 x USB-A (QC3.0)
USB-C (PD) Output5V-3A, 9V-2A, 12V-1.5A (Max 18W)
USB-A (QC3.0) Output5V-3A, 9V-2A, 12V-1.5A (Max 18W)
Working Temperature55°C
LED Indicator LightBlue
Shell ColorBlack
Product Weight40g
Dimensions (L x W x H)66.5mm x 39mm x 25.9mm
CertificationsCE

Aging test setup with detailed output specifications for PD18W and QC3.0.
Figure 7: Output Specifications and Testing

Product size diagram with dimensions and basic specifications table.
Figure 8: Product Dimensions

9. User Tips

  • Always use high-quality charging cables that are compatible with your device and the charger's fast-charging protocols (PD or QC3.0) for optimal performance.
  • Ensure the vehicle's electrical system is in good condition before installation to prevent damage to the charger or vehicle.
  • Keep the dust cover closed when ports are not in use to prolong the life of the charger and prevent debris from entering.

10. Disposal & Recycling

Do not dispose of the product with general household waste. This product contains electronic components and should be disposed of according to local environmental and waste disposal regulations. Please consult your local authorities for information on recycling options.

11. Warranty & Support

For warranty information, technical support, or any questions regarding your YTYIN PD QC3.0 Car Charger Socket, please contact the seller or manufacturer directly through your purchase platform. Please have your order details ready when contacting support.

© 2024 YTYIN. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.