1. Safety Information
- Please keep the light away from corrosive, flammable, or explosive environments.
- Ensure the operating voltage does not exceed the rated voltage of AC170V-260V.
- Always cut off the power supply before installing or performing maintenance on the floodlight.
- Warning: This product must be installed by a professional electrician to ensure correct and firm wiring, preventing electrical hazards.
2. Product Overview
The D brand PIR Motion Sensor LED Floodlight is designed for outdoor use, offering intelligent light control, motion detection, and remote operation. It features a durable aluminum body, high-quality LED wicks, and efficient heat dissipation for long-lasting performance.




3. Setup and Installation
3.1 Mounting Methods
The floodlight can be mounted in various positions to suit your needs:

- Wall Mount: Fix the bracket to a wall surface using appropriate screws.
- Ceiling Mount: Secure the bracket to a ceiling.
- Ground Mount: Install the floodlight into the ground using suitable fixtures.
Use the attached fasteners to fix the product's movable bracket securely. Ensure the fastening parts are strong and stable to prevent accidents.
3.2 Wiring Instructions
Connect the main supply cables to the terminal port according to the color-coding principle:
- Brown: Live Wire
- Blue: Neutral Wire
- Green/Yellow: Earth Wire
Ensure all power cord connection parts are properly insulated for safety. The floodlight does not come with a plug, requiring direct wiring.

3.3 PIR Motion Sensor Adjustment
Rotate the movable bracket to adjust the floodlight to your desired lighting angle. Once set, lock the screws on both sides of the bracket to secure the position.
4. Operating Instructions
4.1 PIR Motion Sensor Settings
The PIR motion sensor has three adjustable knobs:
- SEN (Sensitivity Knob): Adjusts the detection range from 2 to 8 meters.
- TIME (Duration Knob): Sets how long the light stays on after detection, from 5 seconds to 12 minutes.
- LUX (Light Sensitivity Knob): Adjusts the sensor's activation sensitivity to ambient light. This allows for all-day detection or night-only detection modes (represented by a 'Sun' icon for all-day and a 'Moon' icon for night-only).
4.2 Initial Setup and Calibration (PIR Sensor)
- Turn on the power supply to activate the floodlight.
- Rotate the TIME knob to the "-" position (minimum duration).
- Rotate the LUX knob to the "Sun" icon position (for all-day detection mode).
- Wait for approximately 35 seconds for the floodlight to automatically disconnect. This completes the sensor's initial self-calibration.
4.3 Test Detection Function
- Within the sensor's 2-8 meter detection range, move in a circular pattern around the sensor.
- When the sensor detects human movement, the floodlight will automatically turn on.
- Once movement stops, the floodlight will automatically disconnect after 5 seconds.
- Important Note: To ensure stable operation, the sensor enters a 5-second "lockout" period after disconnecting. Wait 5 seconds before initiating another detection test.
4.4 Final Setup and Normal Use
Adjust the TIME and LUX knobs to your desired settings for regular use. The sensor is now ready.
4.5 Remote Control Functions (for PIR models with remote)
The remote control allows for convenient adjustment of the floodlight's settings:

- ON/OFF: Turn the floodlight on or off.
- Brightness Adjustment (+/-): Stepless dimming to increase or decrease light intensity.
- AUTO Mode: Activates automatic light control (on at dusk, off at dawn).
- Timing Functions (3H, 5H, 8H): Sets the floodlight to stay on for 3, 5, or 8 hours respectively.
- All Bright / Half Bright: Quick selection for full or half brightness.
The remote control operates via infrared and has a range of up to 10 meters. It requires AAA batteries (not included).
4.6 Intelligent Light Control Function
The floodlight is equipped with an intelligent light control function that automatically manages its operation based on ambient light levels:

- Automatically turns off the lights at dawn.
- Automatically lights up when it gets dark.
5. Maintenance
- Cleaning: Regularly clean the glass panel and body of the floodlight with a soft, damp cloth to remove dirt and debris. Do not use abrasive cleaners or solvents.
- Wiring Inspection: Periodically check the wiring connections to ensure they remain secure and insulated.
- Environmental Protection: Ensure the floodlight remains in an environment free from corrosive substances.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light dims or fails to turn on | Voltage below AC170V | Ensure stable AC170V-260V power supply. |
| PIR sensor not detecting movement | SEN knob set too low; obstructions in detection path | Adjust SEN knob to increase detection range; clear obstructions. |
| Light stays on/off unexpectedly | Incorrect TIME or LUX knob settings; calibration issue | Adjust TIME and LUX knobs; re-perform auto-calibration. |
| Remote control not working | Dead batteries; remote out of range | Replace AAA batteries; ensure remote is within 10m range and pointed at the sensor. |
7. Specifications
| Feature | Specification |
|---|---|
| Product Name | High Brightness LED Flood Light |
| Brand | D |
| Voltage | AC170V-260V |
| Power Options | 10W, 20W, 30W, 50W, 100W, 150W, 200W (selectable) |
| Luminous Flux | 2000-82000 Lumens (depending on wattage) |
| Body Material | Aluminum |
| Protection Level | IP66 Waterproof |
| Power Source | AC |
| Bulbs Included | Yes |
| Item Type | Flood lights |
| Plug | No plug (direct wiring required) |
| PIR Sensing Range | 2-8 meters (adjustable) |
| PIR Sensing Angle | 120 degrees |
| PIR Sensing Time | 5 seconds - 12 minutes (adjustable) |
| Color Temperature Options | Warm White (2700-3500K), Nature White (3500-5500K) |
| Product Dimensions | Refer to product images for detailed dimensions (e.g., 30W model: 16cm x 12cm) |
| Package Dimensions | Length: 18cm, Width: 15cm, Height: 7cm |
| Package Weight | 0.4 kg |


8. User Tips
- For optimal motion detection, ensure the sensor is not obstructed by foliage, furniture, or other objects.
- Experiment with the TIME and LUX settings to find the best configuration for your specific environment and preferences.
- Consider the placement of the floodlight to maximize coverage and minimize false triggers from passing vehicles or animals.
- If using the remote control, ensure a clear line of sight to the floodlight for reliable operation.
9. Warranty and Support
For detailed warranty information and customer support, please refer to the official product documentation or contact the seller directly. A user manual in PDF format is available for download:
10. Application Scenarios
This floodlight is suitable for a variety of outdoor applications, providing bright and efficient illumination:


