BOAYAL T14

Contents

BOAYAL T14 Cross Line Laser Level User Manual

Model: T14 | Brand: BOAYAL

1. Introduction

Thank you for choosing the BOAYAL T14 Cross Line Laser Level. This portable and high-precision instrument is designed for professional users to ensure reliable performance in various working conditions. This manual provides detailed instructions for safe operation, setup, and maintenance of your device.

BOAYAL T14 2-Line Laser Level, portable and high precision
Figure 1: BOAYAL T14 2-Line Laser Level

2. Safety Information

WARNING: Read all safety information and instructions thoroughly before using this product. Failure to follow these warnings and instructions may result in serious injury.

  • Avoid direct eye exposure to the laser beam. The laser radiation can cause eye injury.
  • Do not operate the laser instrument around children or allow children to operate it.
  • The beam from a Class 2 laser is considered safe for up to 0.25 seconds. Eyelid reflexes (blinking) usually provide sufficient protection.
  • Do not disassemble the laser tool. There are no user-serviceable parts inside.
  • Do not modify the instrument in any way. Unauthorized modifications may lead to hazardous laser radiation exposure.
  • Do not stare directly into the laser beam or observe it with optical instruments.
  • Do not set the laser at eye level.

3. Product Overview and Components

Familiarize yourself with the main components of your BOAYAL T14 laser level:

  1. Power Button and Indicator Light
  2. Plus Button (+)
  3. Minus Button (-)
  4. Window Glass (Laser Emitter)
  5. Lock Switch
  6. Battery Compartment
  7. 1/4-inch Threaded Interface (for tripod mounting)
Diagram showing the components of the BOAYAL T14 laser level, including power button, laser emitter, lock switch, and battery compartment.
Figure 2: Product Component Diagram

The device features a robust design with double injection molding of soft plastic and a hard shell, providing dust-proof and drop-proof protection.

Image illustrating the plastic bag anti-fall feature, showing the laser level with a soft rubber exterior for durability.
Figure 3: Durable, Anti-Fall Design

4. Initial Setup

4.1. Battery Installation

The BOAYAL T14 requires 4 x 1.5V AA batteries (not included).

  1. Ensure the lock switch is in the locked position before installing or removing batteries.
  2. Open the battery compartment cover.
  3. Insert 4 AA batteries, ensuring correct polarity (+/-).
  4. Close the battery compartment cover securely.

Important: Do not short-circuit battery terminals, attempt to charge alkaline batteries, or dispose of batteries in fire. Do not mix old and new batteries, or different brands/types of batteries. Keep batteries out of reach of children.

4.2. Mounting Options

The laser level features a 1/4-inch threaded interface at the bottom, allowing it to be connected to various tripods and mounting accessories for different applications.

Images showing the laser level mounted on a multi-function tripod, metal tripod, and a standard tripod, as well as used directly or with a matching base.
Figure 4: Versatile Mounting Options with 1/4" Interface

5. Operating Instructions

5.1. Automatic Leveling Mode

  1. Move the lock switch to the unlocked position.
  2. The vertical and horizontal laser beams will light up, and the instrument will automatically self-level. The indicator light will be green.
  3. If the indicator light is red and flashes frequently, it means the laser level is outside its self-leveling range (tilt angle > 4°). Adjust the position of the laser level to a flatter surface until the indicator turns green.
  4. Short press the power button to cycle through the laser line modes: horizontal line only, vertical line only, or cross lines (horizontal and vertical).
  5. To turn off the device, move the lock switch to the locked position.
Diagram illustrating automatic leveling: if tilt angle is greater than 4 degrees, the laser flashes; if less than 4 degrees, it operates normally.
Figure 5: Automatic Leveling Functionality
Diagram showing the dual module with three output modes: horizontal line, vertical line, and cross line.
Figure 6: Dual Module Output Modes

5.2. Tilt Line Mode (Manual Mode)

This mode allows you to project laser lines at any angle, useful for tasks like installing handrails or decorative patterns.

  1. Ensure the lock switch is in the locked position.
  2. Long press the power button. The vertical and horizontal laser beams will light up and flash once every 5 seconds. The indicator light will be red.
  3. Short press the power button to cycle through the laser line modes (horizontal, vertical, cross).
  4. You can now tilt the laser level to project lines at your desired angle.
  5. To turn off the device, long press the power button again.
Image showing the laser level projecting a diagonal 'slash pattern' line, indicating its ability to work in manual/tilt mode.
Figure 7: Projecting Lines at Any Angle (Slash Pattern)

5.3. Energy Saving Mode (Brightness Adjustment)

The laser level features ten levels of brightness adjustment to protect your eyes and conserve battery life.

  1. In either Automatic Leveling Mode or Tilt Line Mode, short press the '+' or '-' buttons to gradually adjust the brightness of the laser lines (10 levels).
  2. Long press the '+' button to quickly increase brightness to maximum.
  3. Long press the '-' button to quickly decrease brightness to minimum.
  4. The device remembers the last brightness setting when powered off and on again.
Graph comparing usage time of T13 Red beam and T14 Green beam at different brightness levels, showing 10 levels of brightness adjustment.
Figure 8: Energy Saving and Brightness Adjustment

5.4. Pulse Mode

Pulse mode is useful when working over long distances or in bright conditions where the laser line may be difficult to see. It allows the use of an external laser receiver (not included).

  1. In Automatic Leveling Mode, long press the power button to enter Pulse Mode.
  2. The green indicator light will flash continuously to indicate Pulse Mode is active.
  3. In this mode, energy saving levels 1 and 10 are not effective.
Image showing the laser level in pulse mode, working with a separate laser receiver to detect the beam over long distances.
Figure 9: Pulse Mode Operation with Receiver

6. Specifications

Feature Specification
Model NumberT14
Laser ClassClass 2
Laser WavelengthGreen beam: 505-550nm
Measurement Model2 lines (Vertical & Horizontal Lasers)
Leveling Accuracy±1.5mm/5m
Automatic Leveling Range4° ±1°
Working Distance (Line)Green beam: 30m
Operating Time (Green Beam)1st gear: approx. 10 hours; 10th gear: approx. 40 hours
Power Source4 x 1.5V AA batteries
Protection LevelIP54
Operating Temperature-10℃ ~ 50℃
Storage Temperature-25℃ ~ 70℃
Size91*84*58mm
Weight268g
CertificationsCE, RoHS, KC, WEEE
Image showing the internal structure of the laser level, highlighting the Japan Sharp LD light source for high and low temperature resistance and uniform light.
Figure 10: Highlight Laser Technology

7. Care and Maintenance

  • The laser instrument has been precisely calibrated and sealed at the factory.
  • It is recommended to check the accuracy before initial use and periodically thereafter, especially in high-precision work environments.
  • Do not store the laser tool in direct sunlight or expose it to high temperatures, as plastic components may deform.
  • Clean the exterior plastic parts with a damp cloth. Do not use solvents. Dry with a soft, dry cloth before storage.
  • If the tool will not be used for several months, remove the batteries to prevent leakage.
  • Dispose of the product and batteries according to local regulations.

8. Troubleshooting

  • Laser lines flashing rapidly (red indicator): The device is outside its self-leveling range (>4° tilt). Place the laser level on a flatter surface.
  • Indicator light red and flashing frequently: Battery power is low. Replace the AA batteries.
  • No laser lines or device not powering on: Check battery installation and ensure batteries are fresh. Verify the lock switch is in the unlocked position for automatic leveling mode.
  • Laser lines are dim: Adjust brightness using the '+' button. Ensure you are not in Pulse Mode if trying to use energy saving levels 1 and 10.
  • Inaccurate measurements: Perform a periodic accuracy check. If persistent, contact customer support.

9. User Tips

  • For best visibility in bright conditions or over longer distances, use Pulse Mode with a compatible laser receiver.
  • Always ensure the lock switch is in the locked position when transporting or storing the device to protect the internal pendulum.
  • Utilize the 1/4-inch threaded interface with a suitable tripod for stable and precise measurements, especially when working on uneven surfaces or requiring specific angles.
  • Adjust the brightness level to suit your working environment to optimize visibility and extend battery life.

10. Warranty and Support

We guarantee the quality of the products supplied and provide excellent after-sales service for professional users. This statement is an addition to your contractual rights as a professional user and your legal rights as a non-professional user, and does not contradict your rights.

Under the following warranty conditions, we will provide warranty service for defects in materials and workmanship of your purchased laser level for a period of one year from the date of purchase:

  • Proof of purchase is required.
  • The product has not been serviced or repaired by unauthorized personnel.
  • The product shows fair wear and tear.
  • The product has not been abused or misused.

Defective products will be repaired or replaced free of charge at our discretion. Please send the product along with proof of purchase to our authorized dealer.

This warranty does not cover accidental damage, abnormal wear and tear, or malfunctions caused by repairs and alterations to the product not authorized by us or not in accordance with the manufacturer's instructions.

Repairs or replacements under warranty do not extend the original warranty period.

Within the scope of relevant laws, we are not responsible for indirect or incidental losses caused by defects in this product. Calibration and care of the product are not covered by the warranty.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.