metyoucar XYL1212

Contents

User Manual: ABS Chrome Front Grill Decoration Frame Trim

Brand: metyoucar

Model: XYL1212

1. Product Overview

This car decoration accessory is designed to enhance your vehicle's aesthetic appeal while protecting vulnerable surfaces from scratches, dust, and minor impacts. The product features high-quality 3M adhesive tape for secure, long-lasting installation without damaging your car's original finish.

2. Specifications

Feature Detail
Brand Name metyoucar
Model Name XYL1212
Compatible Car Model For Toyota Land Cruiser Prado FJ150
Compatible Car Model Year 2010-2018
Material ABS
Item Type Chromium Styling
Color Chrome (Silver)
Special Features Decoration
External Testing Certification ISO9001
Origin Mainland China
Item Length 97 cm
Item Width 11 cm
Item Height 9 cm
Item Weight 150g (approx.)
Package Weight 1.0 kg
Installation Method Automotive adhesive tape on the back

3. Package Contents

The package includes the ABS Chrome Front Grill Decoration Frame Trim pieces, pre-applied with automotive adhesive tape.

Rear view of the chrome trim pieces, highlighting the pre-applied automotive adhesive tape.
Rear view of the chrome trim pieces, highlighting the pre-applied automotive adhesive tape.
Front view of the chrome grill trim component, showing its shape and design.
Front view of the chrome grill trim component, showing its shape and design.

4. Installation Instructions

4.1 Preparation (Critical for Strong Adhesion)

Note: Proper surface preparation ensures maximum bonding strength of 3M tape.

  1. Choose a clean, dry, and well-ventilated area (avoid direct sunlight or humid environments).
  2. Clean the target surface with the provided alcohol wipe (or 50-70% isopropyl alcohol solution) to remove dust, grease, and fingerprints.
  3. Allow the surface to air-dry completely (1-2 minutes, no wiping after cleaning).
  4. Ensure the installation temperature is between 15°C-35°C (59°F-95°F) – low temperatures reduce adhesive effectiveness.

4.2 Step-by-Step Installation

  1. Peel off the red protective film from the 3M tape (avoid touching the adhesive surface with bare fingers).

    The reverse side of the trim pieces, clearly showing the automotive adhesive tape for installation.
    The reverse side of the trim pieces, clearly showing the automotive adhesive tape for installation.
  2. Align the accessory with your desired position. Test fit before removing all adhesive backing.

    Demonstration of aligning the upper and lower grill trim pieces on a Toyota Land Cruiser Prado FJ150.
    Demonstration of aligning the upper and lower grill trim pieces on a Toyota Land Cruiser Prado FJ150.
  3. Press firmly on the entire surface of the accessory for 30 seconds – apply a minimum pressure of 15 lbs (6.8 kg) to activate the adhesive.

    Close-up of the installed chrome grill trim, showing how it integrates with the vehicle's front.
    Close-up of the installed chrome grill trim, showing how it integrates with the vehicle's front.
  4. Do not move or remove the accessory within 24 hours – this allows the adhesive to fully cure for permanent bonding.

    Front view of the vehicle after the chrome grill trim installation, labeled 'After install'.
    Front view of the vehicle after the chrome grill trim installation, labeled 'After install'.

5. Functions & Benefits

5.1 Decoration Function

  • Enhances vehicle appearance with stylish design.
  • Customizes your car to reflect personal taste without permanent modifications.

5.2 Protection Function

  • Shields car surfaces from scratches, scuffs, and minor collisions.
  • Prevents dust accumulation and simplifies cleaning (wipe with a damp cloth).
  • No tools, no drilling, removable without residue.

6. Maintenance & Care

  1. Clean the accessory with a soft, damp cloth – avoid abrasive cleaners or solvents.
  2. Check the adhesion monthly; reapply pressure if edges lift (clean the surface first if needed).
  3. For removal: Use 3M adhesive remover or heat the tape gently with a hair dryer (low heat) to soften the bond, then peel off slowly.

7. Troubleshooting

Problem: Accessory falls off

  • Solution: 1. Recheck surface cleanliness; 2. Ensure installation temperature is adequate; 3. Apply more pressure during installation.

Problem: Adhesive residue left

  • Solution: Wipe with alcohol or 3M adhesive remover.

Problem: Misalignment after installation

  • Solution: Remove within 5 minutes (before adhesive cures) and reposition; after 24 hours, follow removal instructions first.

8. Safety Warnings

Warning!

  1. Do not install on airbag deployment areas (e.g., steering wheel, door panels near airbags) – may interfere with safety systems.
  2. Avoid blocking driver's view (e.g., front windshield, rearview mirrors) – violates traffic safety regulations.
  3. Keep away from children under 36 months – small parts may pose choking hazards.
  4. Do not use near open flames or high-temperature sources (adhesive may weaken above 60°C).

9. User Tips

No specific user tips are available from customer reviews or Q&A at this time. Always ensure thorough surface cleaning and proper temperature conditions for optimal adhesion.

10. Compliance Information

EC REP

  • EU Representative: XDH Tech
  • Representative Address: 2 Rue Coysevox Bureau 3, Lyon, France
  • Tel: 33-00330652768898
  • E-mail: xdh.tech@outlook.com

11. Warranty & Support

  • Warranty Period: 12 months from purchase date (covers manufacturing defects, not improper use).
  • Contact Us:
    • AliExpress Store Link: Ychi-Car Accessories Store
    • Customer Service Email: 669279713@qq.com
    • Service Hours: 9:00 AM - 6:00 PM (GMT+8), Monday to Friday
  • A detailed user manual in PDF format is available for download: View User Manual (PDF)

Copyright © Ychi-Car Accessories Store. All rights reserved.

This manual is subject to change without prior notice. For the latest version, visit our store.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.