HM TECH OE:B000526

Contents

User Manual for HM TECH OE:B000526 Rear Wheel ABS Speed Sensor

For Piaggio Series / Vespa Series Vesa300 / GT300

1. Product Overview

The motorcycle ABS (Anti-lock Braking System) sensor is a core detection component of the motorcycle's anti-lock braking system. It is mainly installed on the front and rear wheel hubs of the motorcycle. Its function is to detect the rotational speed of the motorcycle's wheels in real-time, convert the mechanical speed signal into an electrical signal, and transmit it to the ABS control unit.

The ABS control unit uses this signal to monitor the wheel speed. When the wheel is about to lock during braking, the control unit adjusts the brake pressure to prevent wheel lock, avoid side slip and loss of control, and effectively improve the braking safety of the motorcycle under various road conditions (especially wet and slippery roads).

This product is specifically designed for motorcycles, featuring a compact structure, strong environmental adaptability, and high detection accuracy. It is compatible with most mainstream motorcycle models, including street cars, locomotives, scooters, and off-road motorcycles.

HM TECH OE:B000526 Rear Wheel ABS Speed Sensor

Image: HM TECH OE:B000526 Rear Wheel ABS Speed Sensor, top view.

2. Main Features

  • High Detection Accuracy: Fast response speed (signal delay less than 2ms) ensures the ABS control unit obtains real-time and accurate wheel speed data for timely braking adjustment.
  • Strong Anti-interference Ability: Effectively resists electromagnetic interference from the motorcycle's electrical system and external environment, ensuring stable signal output even in complex riding conditions.
  • IP67 Waterproof and Dustproof Performance: Adapts to harsh riding environments such as rain, dust, mud, and road debris, preventing water and dust from entering the sensor and causing damage.
  • High Temperature and Vibration Resistance: Able to work stably under high-temperature environments (up to 150°C) and strong vibration during motorcycle riding, with good structural stability.
  • Compact and Lightweight Design: Easy to install and match with various motorcycle wheel hub structures. Adopts high-quality magnetic materials and precision manufacturing processes for a long service life.
  • Direct Fit Design: Compatible with most original motorcycle interfaces, eliminating the need to modify the vehicle structure and reducing installation difficulty.

3. Specifications

AttributeValue
Item NameRear Wheel ABS Speed Sensor
Part NumberOE:B000526
TypeSpeed Sensor
Brand NameHM TECH
Applicable ModelsPiaggio Series / Vespa Series Vesa300 / GT300
OriginMainland China
Item Weight0.1kg
Package Dimensions (L x W x H)10cm x 8cm x 6cm
Package Weight0.35kg

For a visual reference of the sensor, please see the product images below:

ABS Speed Sensor angled view
Angled view of the sensor.
ABS Speed Sensor connector detail
Detail of the sensor's electrical connector.
ABS Speed Sensor side view
Side view of the sensor.
ABS Speed Sensor head detail
Close-up of the sensor head.
Hand holding ABS Speed Sensor
Sensor head held by hand for scale.

4. Installation Instructions

4.1 Installation Preparation

  • Before installation, turn off the motorcycle's power supply and remove the ignition key to avoid electrical shock or component damage.
  • Required Tools: 8-10mm socket wrench, screwdriver, non-magnetic feeler gauge, compressed air, lint-free cloth, brake cleaner, Loctite 243 thread locker.
  • Verify the sensor model matches your motorcycle model (including front/rear wheel distinction).
  • Inspect the sensor for any damage, deformation, wire breakage, or missing parts.
  • Clean the installation position (wheel hub, sensor mounting bracket, and pulse ring) to remove dust, oil stains, metal shavings, and rust, which could affect detection accuracy and fit.
  • Check the pulse ring (toothed ring) for tooth damage, deformation, or rust. Replace if necessary.

4.2 Mounting Steps

  1. Locate and Align: Find the designated installation position (front wheel hub near the brake disc or rear wheel hub near the sprocket). Align the sensor's mounting hole with the motorcycle's fixing bracket hole, ensuring the sensor probe is aligned with the pulse ring (toothed ring) on the wheel hub.
  2. Install O-ring/Gasket: If the sensor has an O-ring or sealing gasket, install it on the sensor's mounting end. Apply a small amount of engine oil or grease to the O-ring to ensure a good seal and facilitate installation. Verify the O-ring is undamaged and correctly positioned.
  3. Secure the Sensor: Screw the sensor into the mounting bracket by hand first. Then, use a socket wrench to tighten the fixing bolt to the specified torque (typically 6-8 N·m; refer to your motorcycle's torque specification). Apply Loctite 243 thread locker to the bolt if necessary to prevent loosening during riding. Do not overtighten to avoid cracking the sensor body or damaging the mounting bracket.
  4. Adjust Sensor Gap: Use a non-magnetic feeler gauge to measure the gap between the sensor tip and the pulse ring (toothed ring). The ideal gap is between 0.3 mm and 1.0 mm (maximum 1.85 mm for some models). If the gap is not within the specified range, use a thin shim to adjust the sensor position slightly or adjust the mounting bracket.
  5. Route Signal Wire: Route the sensor's signal wire along the motorcycle's frame and brake hose. Fix it with cable clips to prevent the wire from being squeezed, worn, or entangled with the wheel, brake disc, or other moving parts. Ensure the wire has proper slack to avoid pulling or breaking when the wheel turns.
  6. Connect Electrical Connector: Connect the sensor's electrical connector to the corresponding interface of the motorcycle's ABS control unit or wiring harness. Press the release tab until a distinct click is heard to ensure a firm connection. Avoid pulling the wires forcibly to prevent wire breakage or poor contact. Protect the connector from water and dust intrusion.

4.3 Post-installation Test

  1. Power On and Observe: Turn on the motorcycle's power supply, insert the ignition key, and start the motorcycle. Observe the ABS indicator light on the instrument panel. It should turn on when power is applied and go off shortly after the motorcycle starts moving (usually when speed reaches 5 km/h or more), indicating the sensor and ABS system are working normally.
  2. Brake Test: Ride the motorcycle at a low speed (20-30 km/h) and gently step on the brake pedal to check if the ABS system activates (you may feel slight vibration of the brake pedal). Observe if the wheel speed signal is stable through the instrument panel (if equipped).
  3. Performance Test: Run the motorcycle at different speeds and test the brake performance under various conditions to verify that the sensor stably transmits wheel speed signals.
  4. Troubleshooting Abnormalities: If any abnormality is found (e.g., ABS indicator light remains on, no ABS activation, unstable signal), stop the motorcycle immediately, turn off the power, and check the installation gap, wiring connection, pulse ring, and sensor integrity.
  5. Learning Process (if required): Pinch the brake switch, turn on the ignition switch and repeat 8 times. Then, ride to 50 km/h and slow down to a stop, until the ABS indicator light goes out.
  6. Final Check: Reinstall any removed parts (e.g., wheel, brake disc, fender) and re-check the sensor's installation status and wire routing to confirm no omissions or errors.

5. Operation Method

  1. Automatic Activation: Start the motorcycle according to the normal startup procedure. The ABS sensor will activate automatically and begin detecting the wheel speed signal, which is transmitted to the ABS control unit in real-time.
  2. Braking Control: During riding, the ABS control unit continuously monitors the wheel speed via the sensor signal. In emergency braking or braking on wet/slippery roads, if a wheel is about to lock, the control unit will rapidly adjust the brake pressure (up to 20 times per second) to maintain a wheel slip rate between 10% and 30%. This ensures the motorcycle maintains directional control while achieving optimal braking.
  3. Indicator Light Status: The ABS indicator light on the instrument panel shows the system's status. If the light is off during riding, the system is normal. If the light is on or blinking, it indicates a fault in the sensor or ABS system, and the ABS function may be invalid (the conventional braking system will still operate normally).
  4. Low Voltage Indication: If the ABS indicator light is blinking, it might indicate low voltage (insufficient battery). Turn off the ignition, charge the battery, and restart. If the fault persists, refer to the troubleshooting section.
  5. System Shutdown: After the motorcycle stops working, turn off the power supply. The ABS sensor will automatically stop working, and the ABS control unit will record the last working data for subsequent maintenance reference.

6. Important Notes

  • Do not install the sensor in a position prone to collision with external objects or excessive friction, to prevent damage to the sensor body, probe, or signal wire.
  • During installation and operation, avoid touching the sensor's detection probe with metal objects, or knocking/scratching it, to prevent damage to the internal magnetic element and maintain signal accuracy.
  • Do not reverse the positive and negative poles of the sensor's power supply during wiring (if applicable), as this will burn the internal circuit and affect ABS system operation.
  • Regularly clean the sensor's probe and pulse ring (toothed ring) to prevent dust, oil stains, metal shavings, or iron deposits from covering the probe or blocking the pulse ring slots, which can cause signal distortion, no signal output, or unstable signals.
  • Avoid prolonged use of the sensor in extremely high (exceeding 150°C) or extremely low (below -40°C) temperatures, as this can damage internal electronic components and shorten its service life.
  • Do not disassemble the sensor without permission. If the sensor is faulty or damaged, replace it with a model that matches your motorcycle. Using incompatible sensors can damage the ABS control unit or cause ABS system failure. It is recommended to use original accessories to reduce fault recurrence.
  • During maintenance or replacement, ensure the motorcycle is parked stably, turn off the power, remove the ignition key, and support the motorcycle with a stand to prevent accidental movement and personal injury. Do not perform maintenance when the brake system is hot.
  • When cleaning the motorcycle, avoid directly flushing the sensor and its connector with high-pressure water to prevent water from entering the internal circuit and causing short circuits.
  • Do not modify the sensor's signal wire or mounting position without permission, as this may affect detection accuracy and lead to ABS system failure.

7. Troubleshooting

  • ABS Indicator Light Remains On After Startup:
    • Check if the sensor's wiring is loose, disconnected, or short-circuited.
    • Check if the sensor's probe is blocked by dust, oil stains, or metal shavings.
    • Check if the sensor is damaged (measure resistance between sensor pins: normal range for two-wire sensors is 800-2300Ω; if it exceeds, the sensor is damaged).
    • Check if the pulse ring (toothed ring) is worn, deformed, rusted, or has missing teeth.
    • Check if the installation gap is within the specified range.
  • No ABS Activation During Braking:
    • Check if the sensor's signal wire is broken or poorly connected.
    • Check if the ABS control unit is faulty.
    • Check if the brake system pressure is normal.
    • Check if the sensor's probe is misaligned with the pulse ring.
  • Unstable ABS Operation (Abnormal Brake Pedal Vibration):
    • Check if the sensor's installation gap is too large or too small.
    • Check if the pulse ring is dirty or damaged.
    • Check if the sensor's internal electronic circuit is faulty.
    • Check if the wiring is interfered by external factors.
  • Sensor Fault Code Displayed (e.g., DTC 1-1, 1-2 for front wheel sensor abnormality):
    • Use an OBD diagnostic tool to read the fault code.
    • Check the corresponding circuit and sensor based on the fault code.
    • Check if the sensor is improperly installed or loose.
    • Check if the wiring harness is defective or the connector is in poor contact.
    • Erase the fault code after troubleshooting and test-ride the motorcycle to confirm the fault is eliminated.
  • Sensor Damage:
    • If the sensor is damaged (no resistance, short circuit, or open circuit), replace it with a new sensor of the same model.
    • Re-adjust the installation gap and wiring connection.
    • Perform a post-installation test.
    • If the pulse ring is also damaged, replace it simultaneously to avoid secondary damage to the new sensor.

8. Maintenance

  • Daily Maintenance: After each use of the motorcycle, wipe the sensor's surface and probe with a lint-free cloth to remove dust, oil stains, and other impurities. Check the sensor's wiring and connector for looseness, oxidation, damage, or water intrusion, and tighten, clean, or dry it as needed. Check the pulse ring for dirt or damage.
  • Regular Maintenance (Every 2000-3000 kilometers or 3 months): Check the sensor's installation gap and adjust it if it's outside the specified range. Check the O-ring or sealing gasket for aging or damage and replace it in time to ensure the seal. Use compressed air to clean the pulse ring slots to prevent debris accumulation. Check the signal wire for wear or breakage and replace it if necessary.
  • Long-term Storage: If the motorcycle will not be used for an extended period, disconnect the sensor's electrical connector, clean the sensor and its installation position, and store the motorcycle in a dry, cool, and dust-free environment. This prevents moisture, corrosion, or dust accumulation from affecting the sensor's performance. The sensor should be stored in multi-layer anti-static packaging to avoid electromagnetic interference.
  • Professional Inspection (Every 10000 kilometers): Have professional technicians inspect the sensor's performance and internal circuit. Use an oscilloscope to detect the signal waveform (a normal waveform is a continuous sine wave). Replace the sensor if any potential fault is found. Utilize a wireless tester or cloud-based diagnosis platform for quick fault detection if available.

9. User Tips

No specific user tips were available from customer reviews or Q&A for this product at this time. Always follow the detailed installation and maintenance instructions provided in this manual for optimal performance and longevity of your ABS speed sensor.

10. Warranty and Support

For any inquiries, technical support, or warranty claims regarding your HM TECH OE:B000526 Rear Wheel ABS Speed Sensor, please contact our customer service team.

24-Hours Customer Service Contact Information

Image: Customer Service Contact Information.

  • 24-Hours Customer Service
  • Mobile: +86-13906874947
  • E-mail: zhangyf@he-meng.com

If you require customization or a bulk order, please contact our customer service team using the details above.

A PDF version of this user manual is available for download. Please refer to the product page for the direct link to the PDF document: User manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.