TEENRAM H11 3000K Yellow LED Fog Light

Contents

TEENRAM H11 3000K Yellow LED Fog Lights

Model: H11

1. Introduction

Thank you for choosing TEENRAM H11 3000K Yellow LED Fog Lights. This manual provides essential information for the safe installation, operation, and maintenance of your new LED fog lights, designed for Renault Megane 3 models from 2009 to 2015.

2. Safety Information

Please read all safety instructions before installation and use. Failure to follow these instructions may result in electrical shock, fire, and/or serious injury.

2.1 General Safety

  • Ensure the vehicle's ignition is off and the battery is disconnected before beginning installation to prevent electrical shock.
  • Handle LED bulbs by their base to avoid touching the LED chips directly.
  • Keep the product away from children.
  • Do not modify the product. Unauthorized modifications may impair the function and safety of the device and will void the warranty.

2.2 FCC Compliance (Information to User)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Important: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.

3. Package Contents

Please check the package for the following items:

  • 2 x H11 LED Light Bulbs

4. Specifications

FeatureSpecification
ModelH11 (also compatible with H9/H8/H16(JP))
Power60W/set
Lumens20000lm/set
Light Color3000K Yellow
LED TypeImported SND chips
LED Quantity (per bulb)12pcs
Rated Current1.5A-10A
Operating VoltageDC 12-24V
Operating Temperature-40℃ to +135℃
Heat Dissipation ModeAluminum heat dissipation, Fanless
Service LifeOver 50,000 hours
Waterproof RatingIP68
Suitable ForHeadlamp, Fog Lamp, Daytime Running Light
OriginMainland China

Note: Manual measurement error is 1-2cm. Please refer to the actual product for details.

Diagram showing the dimensions of the H11 LED bulb: 59.13mm (2.32inch) total height, 38.74mm (1.52inch) from base to top, 13.7mm (0.53inch) width of the LED section, and 39.51mm (1.55inch) width at the base.

Figure 4.1: H11 LED Bulb Dimensions

5. Setup and Installation

These LED fog lights are designed for easy, plug-and-play installation. No complicated tools or operations are required.

5.1 Pre-Installation Check

  • Ensure the vehicle is turned off and the parking brake is engaged.
  • Disconnect the negative terminal of the vehicle's battery for safety.
  • Verify that the H11 socket type matches your vehicle's original fog light housing.
  • Compare the size of the LED bulb with your OEM specifications to ensure proper fitment within the housing.

5.2 Installation Steps

  1. Take out the LED socket: Carefully remove the new LED bulb from its packaging.
  2. Remove the original car lights: Access your vehicle's fog light assembly and carefully remove the existing halogen bulbs. This may involve twisting or unclipping the old bulb.
  3. Connect the plug of the light bulb: Connect the electrical connector from your vehicle's wiring harness to the new LED bulb. Ensure a secure connection.
  4. Fix the position of the light bulb securely: Insert the LED bulb into the fog light housing. Ensure it is seated correctly and securely.
  5. Rotate Slightly and make it fixed: Gently twist or secure the bulb into place according to your vehicle's housing design until it is firmly locked.
  6. Correct the power supply and test: Reconnect the vehicle's battery. Turn on your vehicle's fog lights to test the new LED bulbs. Ensure both lights illuminate correctly and have a proper beam pattern.
Six-step visual guide for quick installation of LED fog lights. Steps include taking out the LED socket, removing original car lights, connecting the plug, fixing the bulb position, rotating to secure, and testing the power supply.

Figure 5.1: Quick Installation Guide

6. Operating Instructions

Your TEENRAM LED fog lights operate in conjunction with your vehicle's existing fog light switch. Once installed, simply activate your vehicle's fog lights as you normally would.

  • Perfect Beam Pattern: These LED bulbs are designed to perfectly mimic the original halogen beam pattern, providing a wider angle and farther range of light on the road.
  • High Brightness: Experience up to 200% more light with a clear 3000K yellow vision, enhancing visibility during night driving or adverse weather conditions.
  • Safe Driving: The design ensures no glare to oncoming traffic and no dark spots, contributing to safer driving conditions.
A car driving on a road at dusk with bright yellow fog lights illuminated, demonstrating enhanced visibility.

Figure 6.1: Enhanced Visibility with Yellow Fog Lights

7. Maintenance

TEENRAM LED fog lights are designed for durability and minimal maintenance.

  • Cleaning: Periodically clean the surface of the fog light lenses with a soft, damp cloth to ensure maximum light output. Avoid abrasive cleaners.
  • Inspection: Occasionally check the connections to ensure they remain secure.
  • Durability: With an IP68 waterproof rating and robust aluminum heat dissipation, these lights are built to withstand harsh environments (rain, fog, sand, snow) and provide a long service life of over 50,000 hours.
An LED fog light bulb shown in a rainy environment with a car driving through water, illustrating its IP68 waterproof capability in various weather conditions like rain, fog, sand, and snow.

Figure 7.1: IP68 Waterproof Performance

8. Troubleshooting

If you encounter any issues with your LED fog lights, please refer to the following common problems and solutions:

  • Lights Not Illuminating:
    - Check all electrical connections to ensure they are secure.
    - Verify that the vehicle's fog light switch is functioning correctly.
    - Ensure the correct voltage (DC 12-24V) is being supplied.
  • Flickering, Interference, or Error Light on Dashboard:
    - Some vehicles, especially newer models with CANbus systems, may require additional components to prevent flickering or error messages.
    - If you experience these issues, your car may need resistor cancelers/decoders. These can be purchased separately and installed in-line with the LED bulbs.
  • One Light Out:
    - Check the connections for the non-working light.
    - Swap the non-working bulb with the working one to determine if the issue is with the bulb or the vehicle's wiring.

9. User Tips

  • CANbus Compatibility: If your vehicle's computer system detects the lower power draw of LED bulbs as a fault, resulting in flickering or dashboard error messages, consider installing CANbus decoders (resistor cancelers). These devices simulate the power draw of halogen bulbs, resolving such issues.
  • Beam Adjustment: After installation, if the beam pattern seems off, ensure the bulb is correctly seated and oriented within the housing. Minor adjustments to the fog light housing might be possible on some vehicles.

10. Warranty and Support

For warranty information, technical support, or any questions regarding your TEENRAM LED fog lights, please contact your retailer or the manufacturer's customer service. Keep your proof of purchase for warranty claims.

© 2024 TEENRAM. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.