1. Introduction
This manual provides essential guidelines for the installation, usage, and maintenance of the MACTIONS AF0055 Stylish Chrome Air Intake Filter Cleaner. This accessory is designed to enhance airflow and improve the performance of compatible Harley Davidson motorcycles. Please read these instructions carefully before installation and use to ensure proper function and safety.
Product Features:
- Exposed filter design for enhanced air flow.
- Backing plate engineered to promote smooth airflow into the carburetor/throttle body.
- Built-in internal crank case breathers.
- Includes a high-volume air filter.
- All necessary mounting hardware is included for installation.
2. Safety Information
WARNING:
Motorcycle modification accessories, such as this air intake filter, differ from ordinary accessories. Their installation methods and required components may vary significantly. Improper installation or lack of necessary installation experience can lead to loss of vehicle control and serious injuries. Always seek professional installation technicians for handling if you are unsure. If you need assistance, please consult a qualified mechanic.
- Personal Protection: When installing or replacing accessories, always wear appropriate protective gear, including gloves and eye protection.
- Compliance with Regulations: Ensure that all installed accessories comply with local traffic laws and regulations.
- Avoid Incompatible Accessories: Never use accessories that are not compatible with your specific motorcycle model and specifications.
3. Package Contents
The package includes one set of the Air Cleaner Filter with all necessary accessories:
- Air Cleaner * 1
- Oil Tube * 2
- Breather Standoff * 2
- Washer * 1
- Breather Bolt * 2
- Screw * 3
4. Specifications
| Measurement | Value |
|---|---|
| Overall Length | 188 mm (7.4 inches) |
| Overall Width | 132 mm (5.19 inches) |
| Overall Height | 85 mm (3.34 inches) |
| Weight | 1.75 kg (3.86 lbs) |
5. Compatibility (Fitment)
This air intake filter cleaner is designed for specific Harley Davidson models. Please verify your motorcycle's model, year, and specifications against the list below to ensure compatibility. The product comes with different cover styles (A, B, C, D, E) to match various fitments.
Detailed Fitment List:
- A: Fit For Sportster XL 2004-2022
- B:
- Fit For Dyna/FXR 2000-2017
- Fit For Softail 2000-2015
- Fit For Touring 2000-2007
- Excludes: 2017 Low Rider S FXDLS, 2014-2015 CVO Softail Deluxe FLSTNSE, 2011-2012 Softail CVO Convertible FLSTSE, 2013-2014 Breakout CVO Custom FXSBSE
- Note: Fits cable throttle with Delphi Fuel Injection or CV Carburettor equipped models only! Does not fit Magneti-Marelli fuel injection equipped models.
- C:
- Fit For Dyna FXDLS (2017)
- Fit For Softail (2016-2017)
- Fit For Touring (2008-2016)
- Fit For Trike (2008-2016)
- Fit For 2017 Low Rider S FXDLS, 2014-2015 CVO Softail Deluxe FLSTNSE, 2011-2012 Softail CVO Convertible FLSTSE, 2013-2014 Breakout CVO Custom FXSBSE
- Note: Fits Throttle By Wire Models Only!
- D:
- Fit For M8 Softail 2018-2024
- Fit For M8 Touring 2017-2023
- Fit For M8 Trike 2017-2025
- Fit For Road King Special 2024-2025
- Fit For Road Glide Limited 2024
- Fit For Ultra Limited 2024
- E:
- Fit For Harley Touring CVO Road Glide FLTRXSE 2023-2025
- Fit For Harley Touring CVO Street Glide FLHXSE 2023-2025
- Fit For Harley Touring CVO Road Glide ST FLTRXSTSE 2024-2025
- Fit For Harley Touring Road Glide FLTRX and Street Glide FLHX 2024-2025
- Fit For Harley Softail Breakout FXBR, Fat Boy FLFB, Fat Boy Gray Ghost FLSTFI, Heritage Classic FLHC, Low Rider S FXLRS, Street Bob FXBB 2025
6. Installation Guide
This section provides general guidelines for installing motorcycle accessories. Specific details may vary depending on your motorcycle model and the exact product type. Always refer to your motorcycle's service manual for detailed instructions.
- Preparation: Ensure your motorcycle is turned off and cooled down. Gather all necessary tools and the components listed in Section 3.
- Personal Protection: Wear appropriate protective gear, including safety glasses and gloves.
- Remove Existing Components: Carefully remove the existing air cleaner assembly from your motorcycle. Pay attention to how components are connected (e.g., hoses, wiring).
- Install Backing Plate: Mount the new backing plate to the carburetor/throttle body using the provided hardware. Ensure a secure fit and proper alignment for smooth airflow.
- Connect Breathers: Install the internal crank case breathers and connect the oil tubes as per your motorcycle's requirements.
- Attach Air Filter: Secure the high-volume air filter to the backing plate.
- Install Outer Cover: Place the chrome outer cover over the filter and secure it with the provided screws.
- Final Check: Double-check all connections, bolts, and hoses to ensure they are tight and correctly installed. Start the motorcycle and listen for any unusual noises or air leaks.
For a visual guide, please refer to the official user manual PDF: User manual (PDF)
7. Maintenance
Regular maintenance of your air intake filter cleaner is crucial for optimal performance and longevity.
- Filter Cleaning: Periodically inspect the air filter for dirt and debris. Clean or replace the filter element as recommended by the manufacturer or when visibly dirty. Use appropriate filter cleaning kits.
- Hardware Check: Regularly check all mounting hardware (screws, bolts) for tightness. Vibrations from motorcycle operation can loosen fasteners over time.
- Component Inspection: Inspect the oil tubes, breather standoffs, and other components for any signs of wear, cracks, or damage. Replace any damaged parts immediately.
- Professional Repair: If any accessories are damaged or their performance declines significantly, stop using them immediately and seek professional repair services.
8. Troubleshooting
This section addresses common issues you might encounter. If you experience problems not covered here, please consult a professional motorcycle technician.
Common Issues:
- Reduced Engine Performance: This could indicate a clogged air filter. Inspect and clean or replace the filter element.
- Air Leaks: Check all connections and mounting points for tightness. Ensure gaskets and seals are properly seated.
- Unusual Noises: Re-check all installed components for proper seating and tightness. Ensure no parts are vibrating against each other.
9. User Tips
- Double-Check Compatibility: Always verify the exact model and year of your motorcycle against the detailed fitment list (Section 5) before purchasing and installing to avoid compatibility issues. For example, ensure your 2008 Fat Boy TC98 is covered by the specific fitment notes.
- Professional Installation Recommended: If you are not experienced with motorcycle modifications, consider having the air cleaner installed by a certified technician to ensure safety and proper function.
- Regular Cleaning: Keep the exposed filter clean, especially if riding in dusty environments, to maintain optimal airflow and engine performance.
10. Warranty and Support
For information regarding product warranty, returns, or technical support, please refer to the seller's policies or contact the MACTIONS customer service directly. Keep your proof of purchase for any warranty claims.