SWEVY SW-8035

Contents

SWEVY SW-8035 Automotive Battery Tester User Manual

Model: SW-8035 (This manual covers general operation applicable to the SW-8035 and SW-8055 models. Please refer to the specifications section for model-specific features.)

1. Brief Introduction

This automotive battery tester is designed for testing 12V and 24V lead-acid starting batteries, including their cranking system and charging system. It provides clear readings via a high-resolution LCD display and features easy-to-use buttons, intelligent test methods, and reverse polarity protection for safe and convenient operation.

The tester is an essential tool for battery sales, vehicle repair, and battery inspection, offering comprehensive diagnostics for lead-acid starting batteries.

SWEVY Battery Tester highlighting key features: 12V/24V compatibility, CCA/Battery Life Test, Multiple Language Switching, Reverse Connection Protection, and Data Recording.

Figure 1: SWEVY Battery Tester highlighting key features: 12V/24V compatibility, CCA/Battery Life Test, Multiple Language Switching, Reverse Connection Protection, and Data Recording.

2. Safety Rules and Precautions

To ensure safe operation and prevent damage to the tester or injury, please adhere to the following rules:

  • The tester is designed and produced strictly according to IEC/EN61010-1 safety standard, meeting CATIII 600V and pollution degree 2.
  • It is suitable for 12V and 24V Lead-Acid Starting Batteries, with a working voltage range of DC 9V to 35V.
  • For accurate voltage readings, especially after a full charge, turn on the vehicle's headlights for 2 to 3 minutes to allow the battery voltage to stabilize before testing.
  • Always inspect the insulating layer of the clamps for any damage, bareness, or disconnection before use. Do not operate the tester if the housing is not completely or correctly covered, as this may cause electric shock.
  • Avoid using or storing the tester in conditions of high temperature, high humidity, combustibility, explosion, or strong electromagnetic fields.
  • Do not modify the internal circuit of the tester.
  • Wear appropriate eye protection when testing or repairing to prevent injury from debris.
  • Ensure the testing area is well-ventilated to avoid inhaling toxic gases.
  • When the engine is running, keep the tester and its accessories away from the engine or exhaust pipe to prevent damage from high temperatures.
  • Follow all precautions and maintenance procedures specified by the manufacturer.
  • For accurate results, remove any negative current installations from the vehicle prior to testing.

International Electric Symbols

Symbol Description
⎓DC (Direct Current)
∼AC (Alternating Current)
⎓∼DC/AC
⚠WARNING
⚡HIGH VOLTAGE (ELECTRIC SHOCK)
⏚EARTH
⎔DOUBLE INSULATION
⌖FUSE
⌭BATTERY

3. Product Overview and Structure

The SWEVY Automotive Battery Tester is a compact and robust device designed for ease of use. Below is an overview of its components and dimensions.

Diagram showing the dimensions and key components of the SWEVY SW-8055 Battery Tester, including the report printing box, LCD, and control buttons (increase/page up, decrease/page down, cancel/return, confirm/test).

Figure 2: Dimensions and key components of the SWEVY SW-8055 Battery Tester. Note: The SW-8035 model does not include a report printing box.

Key Components:

  • LCD (Liquid Crystal Display): Displays test results and menu options.
  • Buttons:
    • ▲: Increase value / Page up
    • ▼: Decrease value / Page down
    • ↩: Cancel / Return
    • OK: Confirm / Test
  • Test Clamps:
    • Red Clamp: Positive connection
    • Black Clamp: Negative connection
  • Report Printing Box (SW-8055 only): For real-time printing of test reports.

Dimensions (SW-8055):

  • Length: 32 cm (12.6 inches)
  • Width: 14.5 cm (5.71 inches)
  • Height: 11 cm (4.33 inches)

4. Setup and Initial Connection

The tester is powered by the vehicle's battery. Follow these steps for initial setup:

  1. Battery Installation (for tester's internal power, if applicable): Due to air freight restrictions, the product does not include batteries for its internal functions. You will need to purchase batteries separately if your model requires them.
  2. Connect Clamps:
    • First, connect the RED clamp to the positive (+) terminal of the vehicle battery.
    • Then, connect the BLACK clamp to the negative (-) terminal of the vehicle battery.
  3. Power On: The tester will power on automatically once connected correctly. The screen should display "BATTERY VOLTS" with 12V/24V options.
  4. Check Connections: If the screen displays "Black clamp(NEG.) contact is bad, please check!" or "Red clamp(POSI.) contact is bad, please check!", ensure the clamps are fully and firmly connected to the battery terminals.
  5. Language and Time Setting: From the MAIN MENU, select "LANGUAGE SET" to choose your preferred language (e.g., English, Chinese) and "TIME ADJUST" to set the current date and time.
Illustration of the polarity reversal protection feature, showing the battery tester connected to a battery with clamps, emphasizing that incorrect connections will not damage the equipment.

Figure 3: Polarity reversal protection ensures safety even with incorrect clamp connections.

Image demonstrating the multiple language switching capability of the battery tester, showing English and Chinese language options on the display.

Figure 4: Multiple language options are available for user convenience.

5. Operation Instruction

Navigate through the menus using the ▲ (up), ▼ (down), ↩ (cancel/return), and OK (confirm/test) buttons.

5.1. Battery Capacity Test

This test assesses the condition of the battery based on its rated value.

  1. Ensure the engine and all vehicle devices are off. If the battery was recently charged, turn on headlights for 2-3 minutes until the voltage drops to a normal value.
  2. From the MAIN MENU, select "1. BATTERY CAPACITY" and press OK.
  3. Select the appropriate "BATTERY TYPE" (e.g., Regular Flooded, AGM Flat Plate, AGM Spiral, GEL, EFB) and press OK.
  4. Select the CCA TYPE (e.g., CCA, BCI, CA, MCA, JIS, GB, EN, DIN) displayed on your battery's rating label and press OK.
  5. Enter the CCA RATED value from your battery's label and press OK to start the test.
  6. The test results will be displayed, including Healthy percentage, CCA, Charge percentage, Voltage, Internal Resistance, and Temperature. These results are automatically saved.

Battery State of Health (SOH) Reference Table:

LIFE RESULT NOTE
>80%GREATGood to Use
>60%NORMALNot Bad
>45%CAUTIONKeep Caution
<45%SUGGEST REPLACE!Replace Needed

Note: Internal Resistance for a 24V system refers to the sum total resistance of two series-connected 12V batteries.

5.2. Cranking Test

This test evaluates the battery's cranking performance by measuring cranking voltage and time.

  1. Ensure the engine and all vehicle devices are off.
  2. From the MAIN MENU, select "2. CRANKING TEST" and press OK.
  3. Start the engine as guided by the screen prompts.
  4. The test results (TIME, CRANKING voltage) will be displayed and automatically saved.

Cranking Test Result Reference Table (For 12V System):

Cranking Voltage Cranking Ability Action to Battery
> 10.7 VGoodNo Action
10.2 ~ 10.7 VNormalKeep Caution
9.6 ~ 10.2 VBadReplace It Soon
< 9.6 VVery BadReplace It Immediately

A reading over 9.6V (for 12V systems) or over 16V (for 24V systems) indicates good cranking. Readings below these values suggest abnormal cranking; check connections, wires, starter, and battery terminals.

5.3. Charge System Test

This test determines the condition of the vehicle's charging system under loaded and unloaded conditions.

  1. Ensure the engine and all vehicle devices are off.
  2. From the MAIN MENU, select "3. CHARGE SYSTEM" and press OK.
  3. Start the engine as guided by the screen prompts.
  4. The test results (LOADED voltage, UNLOADED voltage, RIPPLE mV) will be displayed and automatically saved.

Charge System Result Reference Table (For 12V System):

Status Battery Voltage Engine Performance
All Electric System Off (Depress Accelerator)
> 13.5 VNormal
13.2 ~ 13.5 VGeneral
13.0 ~ 13.2 VKeep Caution
< 13 VInspection Immediately
All Electric System On (Depress Accelerator)
13.4 ~ 14.6 VNormal
13.2 ~ 13.4 VKeep Caution
< 13.2 VInspection Immediately

Note: Bad batteries can affect the accuracy of charging system test results.

5.4. Test Report Printing (SW-8055 only)

The SW-8055 model features a built-in thermal printer for instant printing of test reports. The SW-8035 model does not have this printing capability.

  1. After any finished test, press OK to access the Test Report Printing Interface.
  2. Confirm printing by selecting "YES" when prompted "Print report?".
  3. The tester will require the last 4 digits of the vehicle's VIN code. Use the ▲/▼ buttons to set each digit and OK to confirm.
Image showing the real-time printing function of the SWEVY SW-8055 Battery Tester, with a test report being printed from the device.

Figure 5: Real-time printing of test reports (SW-8055 model).

5.5. Data Review

To review previously saved test results:

  1. From the MAIN MENU, use the ▲/▼ buttons to select "4. DATA REVIEW" and press OK.
  2. You can then review the last test results for Battery Capacity, Cranking Test, and Charge System.

6. Specifications

The SWEVY Automotive Battery Tester is designed for versatility and precision. Here are its key specifications:

Attribute Value
DIY SuppliesElectrical
OriginMainland China
Battery IncludedNo (requires separate purchase if needed for internal power)
High-concerned chemicalNone
Power SourceNone (powered by vehicle battery)
Suitable for batteries12V/24V
Working voltage rangeDC 9-35V
Screen displayLCD (Liquid Crystal Display)
Detection method4-wire Kelvin method
Anti backpressure accessYes
Language SelectionYes

Model Comparison: SW-8035 vs. SW-8055

Parameter comparison table detailing the differences between SWEVY SW-8035 and SW-8055 models, including product model, suitable batteries, working voltage range, CCA scope, IEC scope, screen display, detection method, anti-backpressure access, test functions, language selection, print report capability, product dimensions, and product weight.

Figure 6: Detailed comparison of SWEVY SW-8035 and SW-8055 models.

Feature SW-8035 SW-8055
CCA Scope100-1700100-2000
Scope of IEC100-1000100-1400
Test functionBattery capacity test, maximum work load test, start-upload test, charging system testBattery capacity test, cranking test, charge system
Print reportNoYes
Product dimensions18*16*5cm32*14.5*11cm
Product weight0.43kg0.8kg

7. Frequently Asked Questions (FAQ)

7.1. What is the measurement principle of this tester?

This tester utilizes the Conductivity Test principle. It applies a known frequency and amplitude AC signal to the battery and measures the AC current signal that maintains the same phase with the AC voltage. The AC conductivity value, which is the ratio of this AC current signal to the AC voltage, is then used to assess the battery's condition. This method is formally recognized by the International Electric and Electronic Engineer Association (IEEE) as a standard for checking lead-acid storage batteries.

7.2. Is the result affected by the installation of negative current for the vehicle?

Yes, any negative current installation in the vehicle will affect the test results. For the most accurate data, it is recommended to remove any negative current installations prior to performing the test.

7.3. Can this tester predict when the battery goes down?

Predicting the exact end-of-life for a sealed lead-acid battery based solely on internal resistance is complex due to various contributing factors (ohm internal resistance, concentration polarization, chemical reactions, double capacitance effects). There isn't a strict correlation between internal resistance and battery capacitance. However, a sudden increase in internal resistance and a corresponding decrease in conductance can indicate that the battery's life will soon be over.

7.4. Is the CCA value tested by this tester correct?

CCA (Cold Cranking Amps) is a control standard for battery production. For a new battery, the tested CCA value is typically 10-15% higher than its standard rated value. As the battery is used and ages, its CCA value will gradually approach, and eventually fall below, the standard rating.

7.5. What is the difference between the method of this tester and the load test method?

Load Test Method:

  • Principle: Forcibly applies a high permanent DC current (typically 40-80A) through the battery for a short period (2-3 seconds) and calculates internal resistance from the tested voltage.
  • Disadvantages:
    • Only suitable for large capacitance or storage batteries.
    • High current causes polarization phenomenon, leading to inaccurate internal resistance readings if not tested quickly.
    • Can damage the battery's internal electrodes due to high current.

This Tester's Method:

  • Principle: Treats the battery as an active resistance. It applies a fixed frequency and small current, samples the voltage, and calculates internal resistance after rectification and smoothing.
  • Advantages:
    • Can test almost all types of batteries, including low-capacity batteries and notebook batteries.
    • Does not harm the battery during testing.

8. Maintenance

Proper maintenance ensures the longevity and accuracy of your SWEVY Battery Tester:

  • Cleanliness: Regularly clean the test clamps to ensure good electrical contact.
  • Inspection: Periodically check the insulation of the clamps and the tester's housing for any signs of wear, damage, or bare wires.
  • Storage: Store the tester in a cool, dry place, away from direct sunlight, extreme temperatures, high humidity, and corrosive environments.
  • No Modifications: Never attempt to open or modify the internal circuitry of the tester. This can void the warranty and pose a safety risk.
  • Battery Replacement: If your model requires internal batteries, replace them as needed following the manufacturer's guidelines.

9. Troubleshooting

If you encounter issues with your SWEVY Battery Tester, refer to the following common problems and solutions:

  • Tester does not power on:
    • Ensure the red and black clamps are securely connected to the correct battery terminals.
    • Verify the vehicle battery has sufficient charge to power the tester (minimum 9V).
  • "Black clamp(NEG.) contact is bad" or "Red clamp(POSI.) contact is bad" message:
    • Check the clamp connections to the battery terminals. Ensure they are clean and firmly attached.
    • Inspect the clamps and cables for any damage or corrosion.
  • Inaccurate or inconsistent test results:
    • Ensure all vehicle accessories and the engine are off before testing.
    • If the battery was recently charged, turn on headlights for 2-3 minutes to stabilize the voltage before retesting.
    • Remove any negative current installations from the vehicle for more accurate readings.
    • Ensure the correct battery type and CCA rating are entered into the tester.
  • Cranking Test results indicate "Bad" or "Very Bad":
    • Check the battery's state of charge.
    • Inspect battery terminals, cables, and starter motor connections for corrosion or looseness.
    • Consider replacing the battery if it consistently tests poorly.
  • Charge System Test results indicate "Keep Caution" or "Inspection Immediately":
    • This suggests a potential issue with the vehicle's charging system (alternator, voltage regulator) or the battery itself.
    • Consult a qualified mechanic for further diagnosis.

10. User Tips

  • Optimal Accuracy: For the most accurate battery test results, always ensure the battery terminals are clean and the clamps are securely attached.
  • Battery Rest: If testing a battery immediately after charging or a long drive, allow it to rest for at least 30 minutes, or turn on the headlights for 2-3 minutes, to get a more stable voltage reading.
  • Safety First: Always wear safety glasses when working with vehicle batteries. Ensure good ventilation in your workspace.
  • Regular Checks: Perform regular battery health checks, especially before long trips or during extreme weather conditions, to prevent unexpected breakdowns.
  • Understanding Results: Familiarize yourself with the State of Health (SOH) and Cranking Test reference tables to correctly interpret your battery's condition.

11. Warranty and Support

For specific warranty information, technical support, or service inquiries regarding your SWEVY SW-8035 Automotive Battery Tester, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Additional item guides and documents, including the full user manual in PDF format, may be available from the seller or manufacturer. You can often find these resources on the product's support page or by contacting customer service.

A PDF version of the user manual is available: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.