DELI KA-AP3695

Contents

70W Wireless Portable Air Compressor Pump

Model: KA-AP3695

1. Warning & Safety Information

  • Do not overload the tool to prevent damage.
  • Wear gloves during use to prevent cuts.
  • Not for use by children; adult supervision required.
  • Do not use in applications for which the tool is not designed.
  • Avoid use in damp or wet environments.

2. Product Overview

The DELI KA-AP3695 is a 70W wireless portable air compressor pump designed for inflating various items such as car tires, bicycle tires, motorcycles, and sports balls. It features a digital display, intelligent preset with auto-stop functionality, and built-in LED lighting for convenience.

DELI KA-AP3695 Portable Air Compressor Pump with various items it can inflate: car, motorcycle, bicycle, basketball, and soccer ball.

Figure 1: The DELI KA-AP3695 pump is versatile for various inflation needs.

Key features of the portable tire inflator: Cordless & Untethered, Versatile & Multi-use, Intelligent Preset & Auto-Stop, Built-in LED Lighting & Emergency SOS, Type-C charging, Global Compatibility with Multiple Units.

Figure 2: Key features of the portable air compressor pump.

3. Setup

3.1. Unboxing and Initial Inspection

Carefully remove all components from the packaging. Inspect the air compressor pump and accessories for any signs of damage. Ensure all parts listed in the package contents are present.

3.2. Charging the Device

Before first use, fully charge the air compressor pump. Connect the provided Type-C charging cable to the charging port on the device and to a suitable USB power adapter (not included). The battery indicator on the digital display will show charging status.

Dimensions of the Car Air Pump KA-AP3695: 5.16 inches (131mm) length, 3.11 inches (79mm) width, 1.97 inches (50mm) height. Specifications include Battery: 4000mAh, Voltage: 7.4V, Inflation Range: 3-150PSI, Charging Port: Type-C.

Figure 3: Product dimensions and charging port location.

3.3. Attaching the Air Hose and Nozzle

Screw the air hose securely onto the pump's air outlet. Select the appropriate nozzle adapter for the item you wish to inflate and attach it to the other end of the air hose.

4. Operating Instructions

4.1. Powering On/Off

Press and hold the power button (usually the central button on the control panel) to turn the device on or off.

4.2. Selecting Pressure Unit

With the device powered on, press the 'Unit' button (often labeled with a symbol like 'M' or a unit icon) to cycle through available pressure units: PSI, BAR, KPA, and Kg/cm².

4.3. Setting Target Pressure

Use the '+' and '-' buttons to adjust the desired target pressure. The digital display will show the current pressure and the target pressure. The pump features an intelligent preset and auto-stop function, meaning it will automatically stop once the target pressure is reached.

4.4. Connecting and Inflating

  1. Ensure the air hose is securely attached to the pump and the correct nozzle is attached to the item to be inflated.
  2. Connect the nozzle to the valve of the item (e.g., tire valve, ball valve).
  3. Verify the current pressure reading on the display.
  4. Set your desired target pressure using the '+' and '-' buttons.
  5. Press the power/start button to begin inflation. The pump will automatically stop when the preset pressure is reached.
  6. Disconnect the nozzle from the item and then detach the air hose from the pump.
Person inflating a car tire with the portable air compressor pump.

Figure 4: Inflating a car tire.

Person inflating an inflatable mattress with the portable air compressor pump while camping.

Figure 5: Inflating an inflatable mattress.

Portable air compressor pump inflating a bicycle tire.

Figure 6: Inflating a bicycle tire.

4.5. Using the LED Light Modes

The pump includes a built-in LED light with multiple modes for convenience, especially during night-time use.

  1. **Constant Light**: Click the light button once for illumination during operation or in dark environments.
  2. **SOS Flashing**: Click the light button again to activate the SOS distress signal.
  3. **Strobe Warning**: Click the light button a third time for a warning strobe light, useful for alerting others.
Diagram showing the three LED light modes: Constant Light for illumination, SOS Flashing for distress signal, and Strobe Warning for alerting and deterrence.

Figure 7: LED light modes for various situations.

5. Maintenance

  • After each use, clean the tool thoroughly. Wipe off any oil, grease, or dirt from the handle and body to prevent slipping and maintain cleanliness.
  • Inspect the air hose and nozzles for any damage or wear.
  • Apply lubricating oil to moving parts if necessary to prevent rust and ensure smooth operation.
  • Store the air compressor pump in a clean, dry place, away from direct sunlight and extreme temperatures.

6. Troubleshooting

  • **Tool Jams or Fails to Turn**: If the pump jams or fails to operate, identify and resolve the cause. Do not attempt to force operation or extend the lever arm, as this can cause damage. Check for obstructions in the air intake or outlet.
  • **Inaccurate Pressure Reading**: Ensure the nozzle is securely connected to the valve stem without any air leaks. Calibrate the device if a calibration option is available (refer to the full PDF manual if needed).
  • **Pump Not Turning On**: Check if the battery is sufficiently charged. Recharge the device if the battery is low.
  • **Slow Inflation**: Ensure the nozzle is correctly attached and there are no leaks. Check the inflation range of the pump to ensure it is suitable for the item being inflated.

For more detailed troubleshooting, please refer to the comprehensive user manual available in PDF format.

7. Specifications

AttributeValue
Model NameKA-AP3695
Item TypePUMPS
MaterialAluminum alloy
Power70W
Voltage7.4V
Battery Capacity3600mAh (Note: Some documentation may state 4000mAh)
Inflation Range3-150PSI
Charging PortType-C
Item Weight0.5kg
Item Length5.16 inches (131mm)
Item Width3.11 inches (79mm)
Item Height1.97 inches (50mm)
OriginMainland China
Premium Cordless Air Compressor highlighting features: Wireless & Portable, Multi-purpose, Smart Preset & Auto-Stop, Built-in LED Flashlight. Shows the digital display with Bar, Psi, Kpa, Kg/cm² units.

Figure 8: Visual summary of product features and capabilities.

8. User Tips

  • **Pre-set Pressure**: Always pre-set your desired pressure before starting inflation to utilize the auto-stop feature and prevent over-inflation.
  • **Check Tire Pressure Regularly**: For vehicles, check tire pressure when tires are cold for the most accurate reading.
  • **Nozzle Storage**: Keep all nozzle adapters organized in the provided storage bag to avoid losing them.
  • **Battery Life**: For optimal battery life, avoid completely draining the battery frequently. Charge it when the indicator shows low battery.
  • **Night Use**: Utilize the built-in LED light for better visibility and safety when inflating in low-light conditions.

9. Manufacturer & EU Representative Information

9.1. Manufacturer

  • Company Name: Ningbo Chengtian Trading Co., LTD
  • Full Address: No. 177, Hongtu Road, Jiangbei District, Zhejiang Province, Ningbo, China
  • Email/Website/Telephone: 19957452076@163.com

9.2. EU Authorized Representative

  • Company Name: MJCM SARL
  • Full Address: 78 avenue des Champs Elysees Bureau 326 Paris Ile-de-France
  • Email/Website/Telephone: mjcm190928@gmail.com

9.3. Importer

  • Importer Name: Shanghai Ye'an Trading Co., Ltd.
  • Full Address: No. 177, Hongtu Road, Jiangbei District, Zhejiang Province, Ningbo, China

A detailed user manual in PDF format is available for download at: User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.