1. Product Introduction
This touch driver is compatible with COB LED strips, supporting touch control through partitions without drilling or wiring. It is designed for easy installation and is ideal for indoor decorative lighting in cabinets, wardrobes, wine cabinets, shelves, and other similar scenarios.
The system allows for seamless integration, providing both illumination and a modern aesthetic without visible switches or complex wiring.
2. Product Features
- Scalable Lighting: One driver can power up to 6 LED strips, and strip length is customizable to fit various applications.
- Invisible Touch Control: The touch switch supports sensing through non-metallic partitions up to 6 cm (approximately 2.36 inches) thick, including materials like wood and acrylic. This eliminates the need for drilling holes for switches.
- Integrated Dimming: Features a built-in dimming switch. A single tap turns the light on/off, while a long press allows for stepless brightness adjustment.
- Universal Power Compatibility: The power driver is available with both EU and US plug options, ensuring compatibility with mains power in different countries.
3. Package Contents
The F100 Partition Touch COB LED Strip Driver Kit typically includes the following components:
- 1 x Driver
- N x LED Strip (quantity varies by order)
- 1 x Touch Switch (sensor)
- 1 x Power Adapter (EU/US plug, depending on region)
4. Setup and Installation
Follow these steps for proper installation:
- Prepare Surface: Clean the installation surface thoroughly. Ensure it is dry and free of dust or grease.
- Attach LED Strip: Peel off the adhesive backing of the LED strip and stick it firmly in the desired location.
- Connect LED Strips to Driver: Connect multiple LED strips to the designated ports on the driver one by one. Ensure you do not exceed the maximum load of 6 strips per driver.
- Connect Touch Switch: Connect the touch switch to its corresponding port on the driver. Position the sensor properly on the non-metallic partition where you intend to activate the light.
- Verify Partition Thickness: Ensure the partition thickness does not exceed 6 cm. Avoid metal partitions, as they will block touch signals and prevent the switch from functioning.
- Power On: Plug the driver into a mains socket. The system is now ready for use.
5. Operating Instructions
- Turn On/Off: Single tap the touch sensor to turn the light on or off.
- Adjust Brightness (Dimming): Long press the touch sensor to adjust the brightness freely. Release your finger when the desired brightness level is reached.
6. Maintenance
- Cleaning: Gently wipe the LED strips and driver with a dry, soft cloth. Do not use abrasive cleaners or solvents.
- Heat Dissipation: The LED strip generates slight heat during operation. Do not fully enclose it; ensure there is adequate space for heat dissipation to prolong its lifespan.
- Connection Check: Periodically check all connections to ensure they are secure. Loose connections can lead to flickering or malfunction.
7. Troubleshooting
- Light does not turn on or flickers:
- Disconnect power immediately.
- Check for loose connections between the LED strips, driver, and power adapter.
- Ensure no more than 6 LED strips are connected to a single driver.
- Resolve any identified issues before powering on again.
- Touch sensor not responding:
- Verify that the partition thickness does not exceed 6 cm.
- Ensure the partition material is non-metallic (e.g., wood, acrylic). Metal partitions will block the signal.
- Check the connection of the touch switch to the driver.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | F100-Closet Lights |
| Input Voltage | 110-240V AC (50/60Hz) |
| Output Voltage | 12V DC |
| Power | 2A, 24W |
| Light Strip Type | 1M COB Light strip (320 LEDs/m, 8 mm PCB width) |
| Light Color Options | White, Natural White, Warm White (2800K–6500K) |
| Switch Type | Partition Touch Switch |
| Touch Sensor Penetration | Up to 6 cm (non-metallic materials) |
| Dimming | Stepless brightness adjustment |
| Material | PVC |
| Lifespan | 50001 Hrs |
| Certification | RoHS, LVD, EMC, CE |
| Is Dimmable | Yes |
| Is Smart Device | No |
9. User Tips
No specific user tips were available from provided reviews or Q&A. However, general tips for optimal use include:
- For best touch sensor performance, ensure the sensor is placed on a smooth, clean, and dry non-metallic surface.
- Experiment with the placement of the touch sensor to find the most convenient and responsive location for your setup.
- When installing multiple strips, plan your layout carefully to ensure all connections are secure and within the driver's capacity.
10. Warranty and Support
For any inquiries or support, please refer to the official user manual PDF or contact customer service.
A digital version of the user manual is available here: User Manual (PDF)
For customized consultation or further assistance, you may contact via WhatsApp: +86 15289643001.
Important Safety Precautions:
- Use only the rated voltage; avoid overvoltage to prevent product damage.
- The touch sensor is designed for non-metallic partitions up to 6 cm thick. Metal surfaces will interfere with its operation.
- Do not install or use the product in humid, high-temperature, flammable, or explosive environments.
- Do not disassemble or modify the driver or LED strips, as this may lead to short circuits, electric shock, or product failure.
- Always disconnect power during installation and only reconnect once all connections are complete and secure.