1. Introduction
Thank you for purchasing the TAONUANSHU T-A-001 American Retro Mirror Painting Wall Lamp. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.
2. Safety Information
- This product is suitable for 110-220V/50HZ power supply.
- Always wear gloves during installation to prevent injury and keep the lamp clean.
- Do not install the lamp on a moist ceiling or in excessively humid environments.
- Turn off the power supply before cleaning or performing any maintenance.
- Clean the lamp with a sanitizer that does not contain corrosive chemicals.
- Keep the lighting away from acidic or alkaline chemical solvents. Otherwise, the galvanized surface of the lighting will be severely damaged.
- Installation should be performed according to the provided installation manual and diagrams.
3. Package Contents
Please check the package contents to ensure all parts are present and undamaged:
- Lamp Body (with integrated E14 lamp holders)
- Mounting Plate
- Mounting Screws and Anchors
- Instruction Manual (this document)
Note: Light bulbs are NOT included. This fixture uses E14 LED bulbs.
Image: Black variant of the TAONUANSHU T-A-001 Wall Lamp.
4. Specifications
| Feature | Specification |
|---|---|
| Brand Name | TAONUANSHU |
| Model Number | T-A-001 |
| Item Type | Wall Lamps |
| Material | Metal (Wrought Iron Body, Iron Shade Type) |
| Technics | Forged |
| Installation Type | Wall Mounted, Self-contained |
| Light Source | LED bulbs (E14 Base Type) |
| Number of Light Sources | 2 |
| Is Bulbs Included | No |
| Voltage | 220 V, 110 V, 90 - 260 V (AC) |
| Luminous Flux | 249-2000 lm |
| Is Dimmable | No |
| Switch Type | Knob switch |
| Lighting Area | 5-10 square meters |
| Application | Kitchen, Dining Room, Bed Room, Foyer, Study, Bathroom |
| Certification | CCC, CE, EMC |
| Warranty | 2 years |
Dimensions:
Image: Dimensional drawing of the lamp. Base diameter 180mm, base height 100mm, overall height 140mm, distance from straight tube to wall 140mm, diameter 450mm, width 210mm.
5. Setup and Installation
Before beginning installation, ensure the power supply is turned off at the circuit breaker to prevent electric shock.
Installation Steps:
- Mounting Plate Installation: Secure the mounting plate to the wall using self-tapping screws. The screws should pass through the hanging plate holes and be tightened clockwise into the ceiling to firmly secure the plate.
- Wiring Connection: Connect the electrical wires from your wall to the terminals on the lamp's base. Ensure connections are secure and follow local electrical codes.
- Lamp Body Attachment: Fix the main lamp body to the mounting plate using the provided hanging plate fixed screws.
Image: Installation diagram. A: Shows the mounting plate with screw holes. B: Illustrates connecting wires to terminals. C: Depicts attaching the lamp body to the mounted plate.
Visual Installation Guide:
Video: This video demonstrates the unboxing, adjustment of the lamp head, and the general assembly process of the wall lamp.
Adjusting the Lamp Head:
The lamp head features a 90-degree up and down adjustment mechanism, allowing you to direct the light as needed.
Image: Close-up view of the lamp's adjustable joint, indicating 90-degree up and down movement.
6. Operating Instructions
Once installed and wired correctly, operate the lamp using the integrated knob switch. Turn the knob to switch the light ON or OFF.
This lamp is not dimmable. Ensure you use E14 LED bulbs appropriate for the desired brightness.
7. Maintenance
- Always disconnect power before cleaning.
- Clean the lamp body and shade regularly with a soft, dry cloth.
- For stubborn dirt, use a mild, non-corrosive cleaning agent. Avoid abrasive cleaners or solvents.
- Ensure the lamp is completely dry before restoring power.
- Periodically check all connections and mounting screws for tightness.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not light up | No power supply Loose wiring Faulty bulb |
Check circuit breaker and wall switch Verify all wire connections are secure (power off first!) Replace bulb with a new E14 LED bulb |
| Flickering light | Loose bulb Incompatible bulb Unstable power supply |
Tighten bulb Ensure E14 LED bulb is used Consult an electrician if power supply is suspected |
| Lamp body is hot | Incorrect bulb wattage Poor ventilation |
Ensure bulb wattage does not exceed fixture's maximum rating Ensure adequate airflow around the fixture |
9. User Tips
- Consider the lamp's dimensions (Base diameter 180mm, overall height 140mm, length 450mm) when planning your installation location to ensure it fits your space and aesthetic.
- The 90-degree adjustable head is useful for directing light precisely, making it ideal for illuminating mirrors, artwork, or specific areas in a room.
- While the lamp is not dimmable, you can choose E14 LED bulbs with different color temperatures (e.g., warm white, cool white) to match your desired ambiance.
10. Warranty & Support
This product comes with a 2-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
For further assistance or to view the original user manual in PDF format, please refer to the following link: User manual (PDF).
For technical support or inquiries, please contact the seller, K9 Crystal Lighting Store.