FEELWORLD S7
Contents
FEELWORLD S7 7-inch 12G-SDI HDMI2.0 Camera Field Monitor
User Manual
Model: S7 | Brand: FEELWORLD
Foreword
Thank you for purchasing our 7-inch 12G-SDI field monitor. Please read this manual carefully before using the unit. Have a great experience!
Caution
- Please avoid heavy impact and dropping the product.
- The screen is made of glass. Handle with care to prevent injury if broken.
- Keep the product away from heat sources and prolonged exposure to direct sunlight to prevent LCD screen damage.
- Do NOT use chemical solutions to clean this product. Wipe the monitor with a clean, soft cloth to maintain surface brightness.
- No adjustable components are inside the monitor. Do not attempt to disassemble or repair the unit yourself to avoid damage.
Key Features
The FEELWORLD S7 is a powerful 7-inch 12G-SDI field monitor designed for film, broadcast, and video creation assistance. It offers professional monitoring solutions with advanced features.
- 7-inch 1920x1200 Full HD IPS screen for detailed viewing.
- Touch screen menu operation for improved shooting efficiency.
- 1600nits daylight viewable brightness.
- Rugged aluminum housing for durability.
- 12G-SDI input and output for professional production needs.
- SDI & HDMI cross conversion capability.
- Support for HDR monitoring (HLG1, HLG2, HLG3).
- Support for 3D LUT Log to REC.709 and user 3D LUT upload (up to 32).
- 3G-SDI & HDMI support LUT loop out.
- Advanced monitoring functions: Waveform, Vector scope, Histogram, Focus Assist, Monochrome, etc.
- Audio meter level display: max 8 channels for HDMI, max 16 channels for SDI.
- Tally Indicator for enhanced team cooperation.
- Stereo Earphone output.
- Standard accessory F970 dual battery plates for long-lasting outdoor power.
- Multiple mounting points (1/4"-20 thread points).
- Built-in cooler for sustained performance.
- Supports 11 languages.


Setup Instructions
1. Power Supply Ways
The monitor can be powered via a DC input or by F970 series batteries.
- Battery Plate: The rear cover is equipped with a dual F970 battery plate, compatible with Sony F970, F960, F950, F930, F770, F750, F730, F570, F550, F530 series batteries. The battery level is displayed on the top right corner of the monitor. V-mount battery plates are optional.
- Battery Switching Instruction: When two batteries are installed, both levels are shown. Users can switch between batteries when one runs low. The working battery is indicated in white, the non-working in gray.
- DC IN 12V: Use the DC power input (5.5mm outer, 2.1mm inner barrel) at the bottom of the monitor. Input range is DC 7~24V. Use a 12V/1.5A or 2A power adapter.
Remark: Use standard original F970 batteries. Higher capacity batteries provide longer working time. Remove batteries if not using the monitor for a long time.
Battery Plate Mount Steps:
- Install the 2P power cable to the cutout.
- Align the screws with the screw holes and tighten them.

2. Mount Points
The monitor features three 1/4"-20 thread points (bottom, right, left) for easy connection to hot shoe mounts, tripods, or other fixed installations.


3. TALLY Indicator Connection
The TALLY indicator provides visual cues for recording or on-air status, enhancing team communication during live production.
| Indicator Color | Pin Connect |
|---|---|
| Green | 1-5 |
| Red | 6-5 |
| Yellow | 9-5 |

Operating Instructions
1. Menu Operation
After connecting the monitor to power, the indicator will be red. It turns on automatically. Once a signal is connected, the indicator turns green. Press the power button to turn off the monitor (while still connected to power), press again to turn it on.
1.1 Touch Screen Menu Operation:
- The touch function can be set as a shortcut key (F1, F2, or F3) via Menu > User Option > Shortcut Key > Touch Switch. When the menu is not displayed, press the assigned shortcut key to toggle touch function ON/OFF.
- Double-click on the screen to open the main menu (displayed on the left). Click on a menu item to show its secondary menu. Select or set options directly. Click the touch screen to exit the menu.
- When the menu is not displayed, swipe up from the bottom of the screen to open the shortcut menu. Swipe left or right to select a function. (Note: Shortcut menu cannot set detailed functions or parameters; use the main menu for that).
- When the menu is not displayed, the left half of the screen (1/2 split) allows direct adjustment of screen backlight brightness. The right half (1/2 split) allows direct adjustment of volume.


1.2 MENU Wheel Menu Operation:
- When the menu is not displayed, directly rotate the wheel to adjust backlight or volume. The wheel function can be set via Menu > System > Left Right Key Set.
- Short press the MENU wheel to open the main menu (left side). Rotate the wheel to select a menu item. Press the wheel to show the secondary menu, then rotate to select. Press the wheel to enter the function menu, rotate to select or set an option. Press the wheel to confirm.
- Long press the MENU wheel to open the shortcut menu (below the screen). Rotate the wheel to select a shortcut option, then press the wheel to toggle the function ON/OFF.
- Press the F3/EXIT key to return or exit the menu.
2. MENU UI Instruction
The User Interface (UI) provides visual feedback on selected functions and settings. Light grey indicates selected items. When a LUT is in use, its name (e.g., system-slog2 to S709.cube) is displayed; otherwise, "LUT off" is shown. Icons indicate if the touch function is locked or unlocked. Numeric values are displayed, and a white border indicates the current scroll wheel position.

3. Cross Conversion Instruction
The monitor supports SDI and HDMI signal cross conversion, with an output resolution of up to 1920x1080.
- HDMI input can simultaneously output HDMI and 3G-SDI.
- 12G-SDI input can simultaneously output HDMI, 3G-SDI, and 12G-SDI.
Note:
- When using the cross conversion function, the HDMI output needs to be set to "Display" (Main Menu > System > Source > Output Source > HDMI OUT > Display).
- The supported format of 12G-SDI output is always the same as the 12G-SDI input.


4. Menu Function Instruction
The monitor offers a comprehensive suite of assist functions to aid in accurate exposure and focus.
4.1 Assist Functions:
| Function | Description |
|---|---|
| All Waves | Turns ON/OFF waveform, vector, histogram, and embedded audio displays. |
| Waveform | Displays overall brightness (RGB, YUV, Y modes) and checks lighting evenness. Adjustable position (X: 0-100, Y: 0-100). |
| Vector | Shows image saturation and pixel distribution on the color spectrum. Adjustable position (X: 0-100, Y: 0-100). |
| Histogram | Quantitative tool for picture brightness (RGB1, RGB2, Y modes). Displays color tone distribution and exposure status. Adjustable position (X: 0-100, Y: 0-100). |
| Focus Assist | Highlights in-focus areas. Adjustable Peaking Level (1-10) and Focus Color (Red, Green, Blue). |
| Embedded Audio | Displays audio diagram. HDMI supports max 8 channels, SDI supports max 16 channels. Adjustable position (X: 0-100, Y: 0-100). |
| Over Exposure | Adjustable Exposure Level (10IRE~). |
| Check Field | Adjusts hue and saturation quickly and accurately (Red, Green, Blue, Gray modes). |
| False Color | Displays objects in colors different from their true color to show exposure levels (Normal, ARRI modes). |






4.2 Marker Functions:
| Function | Description |
|---|---|
| Grids | Divides the screen into grids (e.g., 2x2, 4x4, 9x9, or custom). Adjustable rows (2-9) and columns (2-9). Marker Line Color: Red, Green, Blue, Black, White, Gray. |
| Safe Frames | Displays safe area markers (80%, 85%, 90%, 93%, 96%, 2.35:1). Marker Line Color: Red, Green, Blue, Black, White, Gray. |
| Center Marker | Displays a center cross marker. Marker Line Color: Red, Green, Blue, Black, White, Gray. |
| Ratio Marker | Displays various aspect ratio markers (4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1, 2.35:1). Marker Line Color: Red, Green, Blue, Black, White, Gray. Modified Mark: 0-5. |



4.3 Image Functions:
| Function | Description |
|---|---|
| Scan Mode | Under Scan, Over Scan. |
| Aspect Ratio | Auto, 16:9, 16:10, 4:3, 5:4, 1.85:1, 2.35:1, Full Screen. |
| Anamorphic | 1.33x, 1.6x, 2.0x, 2.0x mag, User (custom adjust 1.20x-2.00x). Allows viewing unsqueezed images from anamorphic lenses. |
| Image Flip | H Flip, V Flip, H_V Flip. |
| Zoom Mode | 2X, 4X, 9X, 16X, User (custom adjust 100%-200%). Amplifies HD signal for high-quality close-up. |
| Image Freeze | Freezes the current image on screen. |
| P2P (Pixel to Pixel) | Enables 1:1 signal source checking without scaling, essential for optimum detail. |



4.4 User Option Functions:
| Function | Description |
|---|---|
| LUT | Loads 3D-LUT tables for color tone recombination. Supports built-in LOG (SLOG2, SLOG3, LOGC, VLOG) and user .cube files (up to 32). |
| HDR | Enables HDR monitoring (HLG1, HLG2, HLG3) for greater dynamic range and detail. |
| Display Adjustment | Adjusts Backlight (0-100), Brightness (0-100), and Contrast (0-100). Also includes Color Gamut (DCI-P3, REC709) and Display Range (Auto, Limit, Full) settings. Color Temp (5600K, 6500K, 9300K, User). |
| Shortcut Key | Assigns functions to F1-F3 buttons (e.g., All Waves, Waveform, Focus Assist, etc.). |
| Left Right Key Set | Sets the function of the MENU wheel rotation (Backlight, Volume). |

4.5 System Functions:
| Function | Description |
|---|---|
| Language | Selects display language (English, Simplified Chinese, Spanish, Portuguese, French, Dutch, German, Japanese, Traditional Chinese, Korean, Russian). |
| OSD Option | Sets OSD Time (off, 15s, 30s, 45s) and OSD Transparency (OFF, 25%, 50%, 75%). Also sets No Signal display color. |
| Volume | Adjusts speaker volume (0-100) and Mute ON/OFF. |
| Cooling Fan | Turns ON/OFF the cooling fan and sets mode (1-5). Default is ON with 3 modes. |
| Source | Selects Input Source (HDMI, SDI) and Output Source (HDMI OUT: Loop Out, Display; 3G-SDI LUT Out: LUT On, LUT Off). |
| Reset | Resets all settings to original factory defaults. |
| Firmware Update | Displays current firmware version. Allows clearing LUT calibration (FTY CAL: On, Reset) and confirming factory calibration. |


Custom LUT Calibration
1. How to Load LUT
The monitor supports loading up to 32 custom LUT files via an SD card.
1.1 SD Card Format:
Support FAT32 or NTFS. For MAC systems, the SD card should be formatted in MS-DOS (FAT).
1.2 Max Files Limit:
Maximum 32 LUT files.
1.3 File Requirements:
- LUT file format suffix must be
.cube. - Single file size not to exceed 7.9Mb.
- Support LUT-3D-Size 16, 17, 32, 33, 64, 65.
- Remark: LUT file names must be in English or Arabic numerals.
1.4 Steps for Loading:
- Ensure the SD card is correctly inserted.
- Enter the main menu: User Option > LUT > Lut Import > Confirm. The monitor will auto-detect the SD card.
- If no SD card is present, the screen will show "failed". Try again, or restart the monitor.
- If an SD card is present, the monitor will erase existing user LUTs and show "Initializing". If no valid LUT file is on the SD card, it will not load and show "clean up".
- If valid LUT files are on the SD card, the monitor will load them and show "[n] name", where [n] is the quantity (under 32). If successful, the screen will show "complete[n]".
2. Custom LUT Calibration Instruction
For users with professional equipment who wish to calibrate the monitor themselves, note the following:
2.1 File Requirements for Calibration:
- For P3 color calibration, the file name should be
@User_P3xxxx.cube(wherexxxxcan be custom). - For 709 color calibration, the file name should be
@User_709xxxx.cube(wherexxxxcan be custom).
2.2 Resetting Calibration:
If custom LUT calibration results in abnormalities or poor results, you can clear the calibration LUT by clicking "Reset" in FTY CAL and return to the factory calibration.
Each monitor is color calibrated ex-factory. The factory calibration button is ON by default. Turning it off will remove factory calibration.
2.3 Firmware Upgrade:
- Format the SD card to FAT32 or NTFS (MS-DOS (FAT) for MAC).
- Copy the update file to the SD card and insert it into the SD card slot (chip facing up). Press firmly to ensure it's fully inserted.
- Click Confirm to update.
- The monitor will turn off automatically after finishing. Turn it on manually.
- Check the firmware version to confirm it's the latest.
Technical Specifications
| Parameter | Value |
|---|---|
| Panel Size | 7" touch screen |
| Resolution | 1920 x 1200 pixels |
| Dot Pitch | 26.25 (H) x 78.75 (W) (um) |
| Color Display | 1.07B |
| Color Depth | 10bit (8+2bit) |
| Color Gamut | 94.9% DCI-P3 |
| Aspect Ratio | 16:10 |
| Brightness | 1600cd/m² |
| Contrast | 1200:1 |
| Viewing Angle | 80°/80°(L/R) 80°/80°(U/D) |
| Backlight | LED |
| Backlight Adjustment Mode | Manual |
| Input | 12G-SDI, HDMI, Tally |
| Output | 12G-SDI, 3G-SDI, HDMI |
| Audio | 3.5mm Stereo Headphone |
| Power Input Voltage | 7~24V |
| Power Consumption | ≤16W |
| Unit Size | 186*116.9*25 (mm) |
| Unit Weight | 550g |
| Mount Points | (3) ¼-20 thread points (right, left, bottom) |
| Working Temperature | -10°C ~ 60°C |
| Storage Temperature | -30°C ~ 70°C |
Supported Input & Output Formats:
| Interface | Supported Formats |
|---|---|
| 12G-SDI Input & Output |
|
| 3G-SDI Output |
|
| HDMI Input |
|
| HDMI Output | When set to Display:
When set to Loop Out (default):
|
Troubleshooting
1. Only black and white or monochrome picture:
- Check saturation, brightness & contrast adjustment.
- Check if "Monochrome" function is enabled.
2. No Image after power on:
- Check if the signal cable connection is in good condition.
- Ensure you are using the standard adapter to connect the monitor.
- If powered by battery, check if the battery is fully charged.
3. Earphone No sound:
- Check if Volume control is open. Press the volume button and try to increase the volume.
If you encounter any other problems, please contact our technical support team for assistance.
User Tips
No specific user tips were available from provided reviews or Q&A content. However, based on the monitor's features, here are some general tips:
- Customize Shortcut Keys: Utilize the F1, F2, F3 buttons for frequently used functions like Focus Assist or Waveform to quickly access them during shooting.
- Battery Management: When using dual F970 batteries, monitor the battery levels and switch to the secondary battery before the primary one completely drains to avoid interruptions.
- Outdoor Visibility: Take advantage of the 1600nits brightness for clear viewing in bright daylight conditions.
- LUT Workflow: Pre-load your preferred 3D LUTs onto an SD card to quickly apply color grades and preview your final look on set.
- Cross Conversion: Remember to set the HDMI output to "Display" in the menu when using the cross conversion feature to ensure proper signal routing.
Warranty and Support
FEELWORLD products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the official FEELWORLD website or contact your authorized dealer. Please note that product features and performance are subject to improvement, and specifications may change without prior notice.
A detailed user manual in PDF format is available for download: FEELWORLD S7 User Manual (PDF)
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.