SHAOQI Motorcycle Turn Signal Spacers

Contents

Motorcycle Turn Signal Spacers Adapters

Model: Motorcycle Turn Signal Spacers | Brand: SHAOQI

1. Introduction

These SHAOQI Motorcycle Turn Signal Spacers Adapters are designed to provide a neat and secure installation for aftermarket turn signals on various Kawasaki motorcycle models. They effectively fill the gaps left after removing original, bulkier indicators, ensuring a flush and professional finish.

Video: Overview of the turn signal spacers.

Four black turn signal spacers with product text 'TURN SIGNAL GASKET For Kawasaki Versys-X Z400 Z650 Z800 Z900'

Image: Main product view showing four spacers and compatible Kawasaki models.

2. Setup and Installation

These turn signal spacers are designed for direct replacement and are easy to install. They are used for both front and rear turn signal installations.

Installation Steps:

  1. Ensure your motorcycle is turned off and cool before beginning installation.
  2. Carefully remove the original turn signals from your motorcycle, noting their wiring connections.
  3. Position the SHAOQI turn signal spacer into the mounting hole on your motorcycle's fairing or bracket.
  4. Mount your aftermarket turn signal into the spacer, ensuring a snug fit.
  5. Reconnect the turn signal wiring according to your aftermarket signal's instructions.
  6. Test the turn signals to ensure they function correctly before riding.

Important: Please install under the guidance of professional maintenance personnel. Do not modify or force installation. Always test safely before normal use.

Diagram showing how the turn signal spacer fits between the turn signal and the motorcycle fairing

Image: Illustration of spacer placement during turn signal installation.

3. Operating Instructions

These turn signal spacers are passive components and do not require any operational input. Once installed, they function as a stable mounting base for your turn signals.

4. Maintenance

The turn signal spacers require minimal maintenance. Periodically inspect them for any signs of wear or damage. Clean with a damp cloth as needed to remove dirt and grime.

5. Troubleshooting

If your turn signals do not fit correctly after installation, ensure the spacers are properly seated and that you have selected the correct aftermarket turn signals compatible with the spacer dimensions. If the turn signals are not functioning, check the electrical connections, as this is typically not related to the spacers themselves.

6. Specifications

FeatureDetail
Product NameMotorcycle Turn Signal Spacers Adapters
MaterialPlastic
ColorBlack
Weight (per set)Approximately 20g
Dimensions (each spacer)Length: 43mm, Width: 27mm, Inner Hole Diameter: 10mm
Package ContentAvailable in 4-piece or 8-piece sets
Installation PositionFront and Rear

Compatibility:

  • Kawasaki Z400 (2018-2019)
  • Kawasaki Z650 (2016-2019)
  • Kawasaki Z800 (2013-2016)
  • Kawasaki Z900 (2017-2019)
  • Kawasaki Z1000 (2014-2019)
  • Kawasaki ER6 (2012-2016)
  • Kawasaki Z900RS (2018-2019)
  • Kawasaki Versys-X 300 (2019-2020)
  • Kawasaki Versys 650 (2016-2020)
  • Kawasaki Vulcan 650 S (All Years)
Diagram showing the dimensions of a single turn signal spacer: 43mm length, 27mm width, 10mm inner diameter

Image: Spacer dimensions diagram.

7. User Tips

  • These spacers are confirmed to be a perfect fit for models like the Kawasaki Z900, including newer models such as the 2025 Z900.
  • Always double-check the dimensions of your aftermarket turn signals to ensure they will fit securely within the 10mm inner diameter of these spacers.

8. Safety Information & Warnings

  • Always ensure the motorcycle is stable and powered off before performing any installation or maintenance.
  • This product is a replacement accessory and is not an original equipment manufacturer (OEM) part.
  • Do not modify or force the installation of the spacers or turn signals.
  • Allow for a 1-3mm difference in measurements due to manual measurement variations.
  • Test all installed components for secure fitment and proper function before operating the motorcycle.

9. Warranty and Support

As a replacement accessory, normal wear and tear of this product are not covered under warranty. For any installation queries or support, it is recommended to consult with professional motorcycle maintenance personnel.

© 2024 SHAOQI. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.