1. Product Overview
The VILCORN X10 PRO is a plug-and-play retro game system designed to bring classic gaming experiences to your TV. It comes preloaded with over 16,000 games and supports more than 30 emulators, offering a wide range of nostalgic titles.

Figure 1: VILCORN X10 PRO Console and Wireless Controllers
Package Contents

Figure 2: Items included in the X10 PRO package
- Game Stick (X10 PRO Console) x 1
- Game Controller x 2 (Wireless)
- Receiver x 1 (for wireless controllers)
- Game Memory Card x 1 (pre-installed with games)
- Power Cable x 1 (USB)
- HD Cable x 1 (HDMI)
- User Manual x 1
Product Video Overview
Video 1: Unboxing and feature demonstration of the X10 PRO game console.
2. Setup Guide
Follow these steps to connect your X10 PRO game system to your TV or other display devices.

Figure 3: Visual guide for connecting the X10 PRO to a TV
- Connect HD Cable: Plug one end of the HD (HDMI) cable into the game console's HDMI output port.
- Connect Power Cable to Console: Plug the USB power cable into the game console's charging interface.
- Connect HD Cable to TV: Plug the other end of the HD cable into an available HDMI input port on your TV.
- Connect Power Cable to TV/Power Source: Plug the other end of the USB power cable into a USB port on your TV or a 5V-2A USB power adapter (not included).
- Insert Receiver: Insert the wireless controller receiver into one of the USB ports on the game console.
- Install Controller Batteries: Open the battery compartment on each wireless controller and insert 2x AAA batteries (not included).
Important Setup Tips:
- The X10 PRO requires a 5V-2A USB power source for optimal performance.
- The 1P controller (Player 1) will typically show a red light, and the 2P controller (Player 2) will show a green light.
- For single-player games, only the 1P controller is needed.
- To activate two-player mode in a game, ensure both controllers are connected and press